SOLICITATION NOTICE
74 -- Laser Engraving System
- Notice Date
- 8/20/2008
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- Department of the Army, Army Contracting Agency, South Region, ACA, Fort Sill, Bldg. 1803 Macomb Rd, Fort Sill, OK 73503
- ZIP Code
- 73503
- Solicitation Number
- W91L0R8224NF02
- Response Due
- 8/26/2008
- Archive Date
- 2/22/2009
- Point of Contact
- Name: Amber VanHoozer, Title: Contract Specialist, Phone: 5804422869, Fax: 5804423819
- E-Mail Address
-
amber.vanhoozer@us.army.mil;
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W91L0R8224NF02 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-26. The associated North American Industrial Classification System (NAICS) code for this procurement is 333293 with a small business size standard of 500 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2008-08-26 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Fort Sill, OK 73503 The USA ACA Fort Sill requires the following items, Brand Name or Equal, to the following: LI 001, Universal PLS 6.120D Laser engraving and cutting platform with a 18"x32"x9" engraving area, top and front doors for easy access, integrated stand with casters, motorized Z-axis adjustment, auto focus, x-y beam positioning system, laser interface driver, job time estimator, stationery processing table, shielded optical components, protected motion system, interchangeable focusing optics, job complete indicator, relocatable origin, enhanced vector cutting and rubber stamp mode. Tool free rapid reconfiguration capability from 25 to 150 watts. CDRH Class 1 safety enclosure for C02 laser beam. Class IIIa for red laser pointer. ROHS compliant.Will be trading in a Universal M30 laser with a cutting surface of 24"X12" and a 30 watt CO2 cartridge. The trade in value is part of the estimated line item cost., 1, EA; LI 002, 60 ULS QUICK CHANGE LASER CARTRIDGE patented, air cooled laser cartridge with integrated red dot pointer, cross platform compatibility (can be used on any universal laser systems platform), Permalign no alignment installation for easy upgradeability., 2, EA; LI 003, HONEYCOMB CUTTING TABLE supports materials being laser cut and provides some vacuum hold down. Designed to draw air through it to remove smoke and cutting vapors as they are generated which aids in keeping the cut parts and the machine cleaner. The table has ruler guides similar to the work table and in which it is installed to aid in positioning materials., 1, EA; LI 004, ON SITE TRAINING. THE VENDOR WILL PROVIDE EIGHT HOURS OF TRAINING ON THE LASER MACHINE., 1, EA; For this solicitation, USA ACA Fort Sill intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACA Fort Sill is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Buyers and Sellers understand that FedBid ranks all bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified herein below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) directly to martha.livsey@us.army.mil (NOT THROUGH FEDBID.COM) so that they are received at that email address no later than the closing date and time for this solicitation. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. 52.252-2 Clauses incorporated by Reference (Feb 1998). This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also the full text of a clause may be accessed electronically at these website: http://acquisition.gov/comp/far/index.html and http://farsite.hill.af.mil. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply:52.219-6, 52.219-28, 52.222-3, 52.222-19,52.222-21, 52.222-26,52.222-36, 52.222-50, 52.225-13, 52.232-36. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. Delivery shall be made within 30 days or less after receipt of order (ARO) or as otherwise specified. FAR Clause 52.247-34 F.O.B.- Destination applies to this acquisition. No partial shipments unless otherwise specified. APACHE GATE DELIVERY INFORMATION All delivery trucks, transportation trucks, vehicles pulling trailers, every type of cargo or construction vehicle must enter through Apache Gate. Location of Apache Gate: Take the Medicine Park exit 45 off of Interstate 44, proceed west on highway 49 (approximately 1/2 mile). Entrance to Apache Gate is on the left (south). FAR Clause 52.204-7 Central Contractor Registration and DFARS Clause 252.204-7004 Alt A Reguired Central Contractor Registration applies to this acquisition. Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. 252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS The contractor aggrees to comply with any clause that is checked on the following list of Defense FAR Supplement clauses which, if checked, is included in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items or componenets. 252-225-7001, BUY AMERICAN ACT AND BALANCE OF PAYMENTS PROGRAM (Jun 2005) (41 U.S.C 10a-10d, E.O. 10582). 252.247-7023, TRANSPORTATION OF SUPPLIES BY SEA (May 2002) (10 U.S.C. 2631 Alternate III (May 2002) of 252.247-7023. Seller to review DFARS Clause 252.211-7003 ALT I ITEM IDENTIFICATION AND VALUATION (JUN 2005), 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS (MAR 2007), 252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2003). In accordance with FAR Clause 52.232-36 Payment By Third Party, incorporated into this contract by reference at paragraph (b) of FAR Clause 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Items, the following information is furnished: The Government will process payments for supplies provided under this contract through the Government Purchase Card System. Contractors are encouraged to assign an identification number to each invoice. The Government will confirm items invoiced by the contractor and authorize payment through the Government purchase card system. The Contractor shall furnish the Government a credit card receipt of the transaction within 24 hours of payment authorization. (See block 9 of the SF 1449 or block 6 of the DD 1155 for the mailing address.) Payment by the Government Purchase Card usually occurs within 72 hours of card transaction. Card transaction (payment) will occur at the time of acceptance of supplies by the Government. Payment may be suspended due to non-conforming supplies. The contractor shall maintain the capability to accept the government purchase card during the life of the contract. The third party is: US Bank GPC Payment Services PO Box 6313 Fargo, ND 58125-6313 The purchase card to be used is: GSA Smart Pay Purchase Card (GPC) SUBMISSION FORMAT FOR INVOICESVENDORS/CONTRACTORS MUST SUBMIT THEIR INVOICES IN THE FOLLOWING FORMAT:1. NAME AND ADDRESS.2. CONTRACT/PURCHASE ORDER NUMBER, INCLUDING DELIVERY ORDER NUMBER. (MUST INCLUDE COMPLETE NUMBER, (i.e. W9124L-xx-x-xxxx or DABK35-xx-x-xxxx or DABT39-xx-x-xxx)).3. DESCRIPTION, PRICE, AND QUANTITY OF PROPERTY OR SERVICES ACTUALLY PROVIDED.4. SHIPPING AND PAYMENT TERMS.5. COMPLETE MAILING ADDRESS.6. TELEPHONE NUMBER AND ADDRESS FOR NOTIFICATION IN CASE OF DEFECTIVE INVOICE. NOTE: INVOICES MUST MATCH PURCHASE ORDER/CONTRACT IN DESCRIPTION AND UNIT OF ISSUE. DEFECTIVE INVOICES WILL BE RETURNED. The Government will evaluate offers in response to this request and award a purchase order/contract to the responsible offeror whose offer conforming to this request, will be most advantageous to the Government considering price and other factors (e.g., past performance, delivery, and/or quality). Award will be made based upon the best value to the Government in accordance with procedures in FAR 13.106-2(b). Quotes MUST be good for 30 calendar days after submission. New equipment ONLY. No remanufactured products. Changes in terms and conditions of this contract may be made only by written agreement of the parties with the exception of administrative changes such as changes in paying office, appropriation data, etc., which may be made unilaterally by the Government. No written or oral statements of any person who so ever other than the Contracting Officer shall, in any manner or degree, modify or otherwise affect the terms of this contract. The Contracting Officer is the only person authorized to approve changes in any of the requirements under this contract, and notwithstanding any provisions contained elsewhere in this contract, the said authority remains solely with the Contracting Officer. If an emergency or unanticipated event interrupts normal Government processes so that quotations cannot be received at the office designated for receipt by the exact time specified in the RFQ, and urgent Government requirements preclude an amendment or other notice of an extension of the RFQ's opening/closing date, the time specified for receipt of quotes will be deemed to be extended to the same time of day specified in the RFQ on the first work day on which normal Government processes resume. If no time is specified in the solicitation, the time for receipt is 4:00 p.m., local time for the designed Government office. A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offers specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. The selected Offeror must comple with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors- Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations anc Certifications-Commercial Items. FAR Provision 52.252-1- Solicitation Provisions incorporated by Reference. This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at these address(es): http://acquisition.gov/comp/far/index.html and http://farsite.hill.af.mil. SELLER TO REVIEW FAR CLAUSE 52.211-6 BRAND NAME OR EQUAL (AUG 1999)
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=0299265750f1f788b7368b7cf204b277&tab=core&_cview=1)
- Place of Performance
- Address: Fort Sill, OK 73503<br />
- Zip Code: 73503<br />
- Zip Code: 73503<br />
- Record
- SN01645419-W 20080822/080820220513-0299265750f1f788b7368b7cf204b277 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |