Loren Data's SAM Daily™

FBO DAILY ISSUE OF SEPTEMBER 11, 2008 FBO #2481
SOURCES SOUGHT

51 -- M9 ACE Special Tools Kit (NSN 4910-01-225-8388)

Notice Date

9/9/2008
 

Notice Type

Sources Sought
 

NAICS

333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
 

Contracting Office

Department of the Army, U. S. Army Materiel Command, U.S. Army TACOM Life Cycle Management Command - Rock Island, TACOM - Rock Island, ATTN: AMSTA-AQ-AR, Rock Island Arsenal, Rock Island, IL 61299-7630
 

ZIP Code

61299-7630
 

Solicitation Number

W52H0908T0574
 

Response Due

10/10/2008
 

Archive Date

12/9/2008
 

Point of Contact

Terrance Jennings, 309-782-3855<br />
 

Small Business Set-Aside

N/A
 

Description

U.S. Army Tank-automotive and Armaments Command Warren, Michigan 48397-5000 1. MANUFACTURE AND ACCEPTANCE INSPECTION OF THE ABOVE MATERIAL SHALL BE IN ACCORDANCE WITH ALL DRAWINGS, SPECIFICATIONS AND OTHER TECHNICAL DATA LISTED IN THIS TDP. 2. THIS TDP IS COMPRISED OF THE FOLLOWING SECTIONS WHICH SHOW PRODUCT STRUCTURE AND LIST THE DRAWINGS AND ASSOCIATED DOCUMENTS (WITH THEIR REVISION AND AMENDMENT LEVELS) REQUIRED TO PRODUCE AND INSPECT THE MATERIAL BEING PRODUCED. z PRODUCT STRUCTURE z PRODUCT DRAWINGS z QUALITY ASSURANCE DOCUMENTS z APPLICABLE SPECIFICATIONS AND STANDARDS z REPLACED SPECIFICATIONS AND STANDARDS z APPROVED ENGINEERING CHANGES OUTSTANDING 3. THE SPECIFICATIONS AND STANDARDS SECTION OF THE TDP IS A COMPILATION OF ALL SPECIFICATIONS AND STANDARDS WHICH ARE ESSENTIAL FOR BIDDING AND MANUFACTURING PURPOSES. THE ABSENCE OF ANY SPECIFICATION OR STANDARD FROM THE LISTING WHICH IS OTHERWISE REFERRED TO IN ANY SPECIFICATION OR STANDARD LISTED THEREIN OR IS CALLED OUT ON A PRODUCT, PACKAGING OR INSPECTION DRAWING IS NOT TO BE CONSTRUED AS CONSTITUTING RELIEF FROM REQUIREMENTS OF THE SPECIFICATIONS. THE AMENDMENT OR REVISION LEVEL FOR SUCH UNLISTED SPECIFICATIONS AND STANDARDS SHALL BE AS SPECIFIED IN THE LATEST ISSUE OF DOD INDEX OF SPECIFICATIONS AND STANDARDS IN EFFECT AS OF THE DATE OF THIS TDP. SUPERSEDED SPECIFICATIONS AND STANDARDS WHICH MAY BE REFERENCED ON DRAWINGS ARE LISTED TOGETHER WITH THE APPROPRIATE SUPERSEDING SPECIFICATION OR STANDARD. WHEN INTERIM CHANGES TO SPECIFICATIONS AND STANDARDS ARE ISSUED (AMENDMENTS, NOTICES OR CHANGE NOTICES), ONLY THE LATEST ISSUE IS LISTED IN THE TDP. WHERE THESE INTERIM CHANGES ARE NOT CUMULATIVE, ALL PREVIOUS ISSUES ALSO APPLY, UNLESS THE DOCUMENT ITSELF STATES OTHERWISE PRODUCT STRUCTURE LEVEL PART NUMBER CAGE NOMENCLATURE ==================================================================================== 0----------5705427 19207 SPEC TOOLS ORGANIZ. MAINT. 1---------12355345 19207 STAND,VEHICLE SUPPORT 2--------12355347-1 19207 PLATE 2--------12355347-2 19207 PLATE 2--------12355348 19207 GUSSET 2--------12355346 19207 HANDLE 2--------12355349 19207 COLUMN 1---------12355436 19207 PAD 1---------12355437 19207 REPLACER 1---------12355451 19207 SOCKET,SQUARE PLUG TECHNICAL DATA PACKAGE 5705427 19207 DOCUMENT NUMBER TDP DATE 10/5/2007 SPECIFICATION NATIONAL STOCK NUMBER - - NOMENCLATURE SPEC TOOLS ORGANIZ. MAINT. TDP: 5705427 19207 Page 1 of 8 https://content.tacom.army.mil/TDPS/ACMS/BL200710/73E051_1191581768060/atdpl.htm 8/18/2008 1---------5705562 19207 PARTS KIT, HYDRAULIC TROUBLESHOOTING, M9 2--------12355351 19207 HOSE ASSEMBLY 2--------12355352 19207 HOSE ASSEMBLY 3-------M43436/5-1 81349 BAND MARKER, BLANK 2--------12355353 19207 TUBE ASSEMBLY 3-------MS20819-8 96906 SLEEVE 3-------AN818-8 88044 NUT,COUPLING 3-------12355353-1 19207 TUBE 2--------12367609 19207 BOX, HYDRAULIC ASSY, TROUBLESHOOTING KIT 3-------12367602 19207 PLATE 3-------12367607 19207 TRAY ASSEMBLY 4------12367603 19207 HANDLE 4------12367604 19207 DIVIDER 4------12367607-1 19207 TRAY 4------12367606-3 19207 DIVIDER 4------12367606-2 19207 DIVIDER 4------12367606-1 19207 DIVIDER 4------12367601 19207 BRACKET 3-------12367608 19207 DECAL, HYDRAULIC TROUBLESHOOTING KIT 3-------12367605 19207 ANGLE 2--------MS51519-A10 96906 NIPPLE,TUBE, 5/8 OD 2--------MS51519-A4 96906 NIPPLE,TUBE, 1/4 OD 2--------MS51503-A4 96906 ADAPTER,FEMALE PIPE TO TUBE 2--------MS51523-A8 96906 TEE, SWIVEL NUT ON RUN 2--------MS51518-B6 96906 PLUG, TUBE END, 3/8 OD 2--------MS51518-B12 96906 PLUG, TUBE END, 3/4 OD 2--------MS51518-B10 96906 PLUG, TUBE END, 5/8 OD 2--------MS51518-B4 96906 PLUG, TUBE END, 1/4 OD 2--------MS51518-B8 96906 PLUG, TUBE END, 1/2 OD 2--------MS51532-B8 96906 CAP,FITTING, 1/2 OD 2--------4-4F6X-S 98441 ADAPTER, STRAIGHT, SWIVEL FLANGE TO HOSE 2--------10F013T 97399 VALVE, NEEDLE 2--------MS24593-8 96906 VALVE, CHECK,MINIATURE HYD,AIRCRAFT AND M 2--------MS24399-19 96906 REDUCER, TUBE, 3/4 X 3/8 2--------MS51500-A8-4 96906 ADAPTER, STRAIGHT, PIPE TO TUBE 2--------MS51519-A8 96906 NIPPLE,TUBE, 1/2 OD 2--------MS51532-B12 96906 CAP,FITTING,3/4 OD 2--------MS51532-B6 96906 CAP,FITTING, 3/8 OD 2--------MS51532-B4 96906 CAP,FITTING, 1/4 OD 2--------MS51532-B10 96906 CAP,FITTING, 5/8 OD 2--------MS51534-A8-4 96906 REDUCER,1/2 X 1/4 2--------MS51534-A6-4 96906 REDUCER,3/8 X 1/4 2--------C5105X6 79470 NUT, TUBE, 3/8 OD 2--------2242-8-8S 16717 ADAPTER, SWIVEL 2--------2081-8-2S 01276 BUSHING, PIPE THREAD 2--------10-8 070123C 81343 REDUCER, 5/8 X 1/2 1---------12252157 19207 ACCUMULATOR CHARGING DEVICE 2--------8762771 19207 MANIFOLD, ACCUMULATOR SERVICING DEVICE 2--------8762762 19207 VALVE ASSEMBLY 2--------8762772 19207 VALVE ASSEMBLY 2--------10870258 19207 ADAPTER, ACCUMULATOR 2--------8687044 19207 VALVE CONNECTION 2--------11668061 19207 REGULATOR, PRESSURE 2--------11668842 19207 ADAPTOR ASSY 2--------8743890 19207 GAUGE 2--------9338048 19200 HOSE ASSEMBLY, FLEXIBLE 3-------9338048-2 19200 HOSE 3-------9338048-3 19200 FITTING 3-------9338048-1 19200 FITTING 3-------M43436/4-3 81349 BAND MARKER, BLANK, SINGLE STYLE BAND TDP: 5705427 19207 Page 2 of 8 https://content.tacom.army.mil/TDPS/ACMS/BL200710/73E051_1191581768060/atdpl.htm 8/18/2008 QQ-P-416 REPLACED BY SAE-AMS-QQ-P-416 QQ-S-630 REPLACED BY ASTM-A575 AND A663 QQ-S-631 REPLACED BY ASTM-A576 AND A675 QQ-S-633 REPLACED BY QQ-S-630, QQ-S-631, QQ-S-634 AND QQ-S-637 QQ-S-634 REPLACED BY ASTM-A108 QQ-S-637 REPLACED BY ASTM-A108 QQ-S-763 REPLACED BY SAE-AMS-QQ-S-763 QQ-S-766 REPLACED BY ASTM-A240, ASTM-A666, AND ASTM-A693 QQ-W-321 REPLACED BY ASTM-B134, ASTM-B159, ASTM-B159M, ASTM-B206, AND AST QQ-W-461 REPLACED BY ASTM-A853, ASTM-A818, ASTM-A641 AND ASTM-A809 QQ-Z-325 REPLACED BY ASTM-B633 APPROVED ENGINEERING CHANGES OUTSTANDING DOCUMENT ECP/RFD/RFW TYPE NUMBER NUMBER STATE NOR CONTENT FILE ==================================================================================== DO 5705565 TACV1034 DO_5705565_01_TACV1034.pdf DO 5705566 TACV1034 *** END OF TDPL *** TDP: 5705427 19207 Page 8 of 8 https://content.tacom.army.mil/TDPS/ACMS/BL200710/73E051_1191581768060/atdpl.htm 8/18/2008 2--------9338049 19200 HOSE ASSEMBLY, FLEXIBLE 3-------9338049-2 19200 HOSE 3-------9338049-1 19200 FITTING 3-------M43436/4-3 81349 BAND MARKER, BLANK, SINGLE STYLE BAND 2--------8762812 19200 SOCKET 2--------8762813 19200 PLUG 2--------MS51872-20 96906 NIPPLE,PIPE,EXTRA STRONG,BRASS OR COPPER 1---------12355501 19207 PLUG,HYD TANK 2--------12355504 19207 BAR 2--------12355505 19207 TUBE 2--------12355506 19207 PLUG 2--------MS28775-226 96906 PACKING, PREFORMED, HYDRAULIC, PLUS +275 1---------12355511-4 19207 REPLACER 1---------12355511-5 19207 REPLACER 1---------12355582 19207 JACK,ROAD WHEEL 1---------5705565 19207 WRENCH SET, OPEN END 2--------12362150 19207 BAG, TOOL 2--------12362149 19207 BAG, TOOL 1---------5705566 19207 WRENCH SET, CROWFOOT 2--------12367674 19207 BOX, TOOL 3-------12367674-1 19207 BOX 3-------MS18012-5 96906 HANDLE, METAL, SPRING-BALL TYPE 3-------MS20613-6P8 96906 RIVET (SUPERSEDED BY NASM20613) 3-------MS18015-1 96906 CATCH, CLAMPING AND STRIKE (CONCEALED SPR 3-------MS20613-4P5 96906 RIVET (SUPERSEDED BY NASM20613) 3-------MS35825-11 96906 HINGE,BUTT,CONT.(PIANO).060 THKNS.,.125 P 3-------12367674-2 19207 LID 1---------MS90728-118 96906 SCREW, CAP, HEXAGONAL HEAD (REFER TO ANSI 1---------MS51937-5 96906 BOLT, EYE, SHOULDER UNC-2A AND UNF-2A 1---------MS51937-7 96906 BOLT, EYE, SHOULDER UNC-2A AND UNF-2A 1---------C3109X6X2 79470 BUSHING, PIPE 1---------208FA 55719 SOCKET SET, SOCKET WRENCH 1---------GAX-1 55719 ADAPTER, SOCKET WRENCH PRODUCT DRAWINGS DOC TYPE PART NUMBER CAGE SHT REV NOTE CONTENT FILES ==================================================================================== DP 10870258 19207 1 A 01.C4 DX 11668061 19207 1 C 02.C4 DX 11668842 19207 1 - 03.C4 DP 12252157 19207 1 B 04.C4 DP 12355345 19207 1 - 05.C4 DP 12355346 19207 1 - 06.C4 DP 12355347 19207 1 - 07.PDF DP 12355348 19207 1 - 08.C4 DP 12355349 19207 1 - 09.PDF DP 12355351 19207 1 A 10.C4 DP 12355352 19207 1 A 11.C4 DP 12355353 19207 1 - 12.C4 DP 12355436 19207 1 - 13.C4 DP 12355437 19207 1 - 14.C4 DP 12355451 19207 1 - 15.C4 DP 12355501 19207 1 - 16.C4 DP 12355504 19207 1 - 17.C4 DP 12355505 19207 1 - 18.C4 DP 12355506 19207 1 - 19.C4 TDP: 5705427 19207 Page 3 of 8 https://content.tacom.army.mil/TDPS/ACMS/BL200710/73E051_1191581768060/atdpl.htm 8/18/2008 DP 12355511 19207 1 - 20.C4 DP 12355582 19207 1 B 21.C4 DP 12362149 19207 1 - 22.PDF DP 12362150 19207 1 - 23.PDF DP 12367601 19207 1 - 24.C4 DP 12367602 19207 1 - 25.C4 DP 12367603 19207 1 - 26.C4 DP 12367604 19207 1 - 27.C4 DP 12367605 19207 1 - 28.C4 DP 12367606 19207 1 - 29.C4 DP 12367607 19207 1 - 30.C4 DP 12367608 19207 1 B 31.C4 D1 12367609 19207 1 - 32.C4 DP 12367674 19207 1 - 33.PDF DY 5705427 19207 1 F 34.C4 DY 5705427 19207 2 F 35.C4 DY 5705562 19207 1 B 36.C4 DO 5705565 19207 1 - 37.C4 DO 5705566 19207 1 - 38.C4 DP 8687044 19207 1 E 39.C4 DP 8743890 19207 1 C 40.C4 DX 8762762 19207 1 B 41.C4 DP 8762771 19207 1 A 42.C4 DP 8762772 19207 1 A 43.C4 DX 8762812 19200 1 B 44.C4 DX 8762813 19200 1 C 45.C4 DP 9338048 19200 1 - 46.C4 DP 9338049 19200 1 - 47.C4 DU AN818 88044 1 19 DU AN818 88044 2 19 QUALITY ASSURANCE DOCUMENTS DOC TYPE PART NUMBER CAGE SHT REV CONTENT FILES ==================================================================================== QS 10870258 19204 1 - 48.C4 QS 12355345 19207 1 - 49.C4 QS 12355345 19207 2 - 50.C4 QS 12355353 19207 1 - 51.C4 QS 12355353 19207 2 - 52.C4 QS 12355353 19207 3 - 53.C4 QS 12355506 19207 1 - 54.C4 QS 12355506 19207 2 - 55.C4 QS 8762771 19204 1 - 56.C4 QS 8762771 19204 2 - 57.C4 APPLICABLE SPECIFICATIONS AND STANDARDS QPL DOCUMENT REV AMD CHG SUPPL DOCUMENT DOCUMENT TITLE NUMBER SYM NO. NO. NO. DATE ==================================================================================== A-A-55592 A 10/31/97 HINGE, BUTT, CONTINUOUS (PIANO) A-A-58092 01/07/97 TAPE, ANTISEIZE, POLYTETRAFLUORE AMS-QQ-A-250 08/01/97 ALUMINUM AND ALUMINUM ALLOY, PLA AMS-QQ-A-250/6 08/01/97 ALUMINUM ALLOY 5083, PLATE AND S TDP: 5705427 19207 Page 4 of 8 https://content.tacom.army.mil/TDPS/ACMS/BL200710/73E051_1191581768060/atdpl.htm 8/18/2008 ASME-B18.2.1 A 10/08/99 SQUARE AND HEX BOLTS AND SCREWS ASME-Y14.100 11/23/01 ENGINEERING DRAWING PRACTICES ASME-Y14.24 01/01/99 TYPES AND APPLICATIONS OF ENGINE ASME-Y14.34M 01/01/96 ASSOCIATED LISTS ASME-Y14.35M 12/08/97 REVISION OF ENGINEERING DRAWINGS ASME-Y14.5M 01/01/94 DIMENSIONING AND TOLERANCING ASTM-A1008/A1008M 09/10/01 STANDARD SPECIFICATION FOR STEEL ASTM-A1011 01/01/01 STEEL, SHEET AND STRIP, HOT-ROLL ASTM-A108 11/01/03 STANDARD SPECIFICATION FOR STEEL ASTM-A109/A109M 01/01/00 STEEL, STRIP, CARBON (0.25 MAXIM ASTM-A240/A240M 01/01/01 HEAT-RESISTING CHROMIUM AND CHRO ASTM-A322 01/01/91 STEEL BARS, ALLOY, STANDARD GRAD ASTM-A331 01/01/95 STEEL BARS, ALLOY, COLD-FINISHED ASTM-A510 01/01/00 WIRE RODS AND COARSE ROUND WIRE, ASTM-A575 01/01/96 STEEL BARS, CARBON, MERCHANT QUA ASTM-A576 01/01/90 STEEL BARS, CARBON, HOT-WROUGHT, ASTM-A641/A641M 01/01/98 ZINC-COATED (GALVANIZED) CARBON ASTM-A663/A663M 01/01/89 STEEL BARS, CARBON, MERCHANT QUA ASTM-A666 01/01/00 ANNEALED OR COLD-WORKED AUSTENIT ASTM-A675/A675M 01/01/90 STEEL BARS, CARBON, HOT-WROUGHT, ASTM-A693 01/01/93 PRECIPITATION-HARDENING STAINLES ASTM-A809 01/01/98 ALUMINUM-COATED (ALUMINIZED) CAR ASTM-A818 01/01/91 COPPERED CARBON STEEL WIRE ASTM-A829/A829M 01/01/00 ALLOY STRUCTURAL STEEL PLATES ASTM-A853 01/01/93 STEEL WIRE, CARBON, FOR GENERAL ASTM-B121/B121M 01/01/95 LEADED BRASS PLATE, SHEET, STRIP ASTM-B134 01/01/96 BRASS WIRE ASTM-B138 01/01/96 MANGANESE BRONZE ROD, BAR AND SH ASTM-B159 01/01/96 PHOSPHOR BRONZE WIRE ASTM-B159M 01/01/96 PHOSPHOR BRONZE WIRE [METRIC] ASTM-B206M 01/01/94 STANDARD SPECIFICATION FOR COPPE ASTM-B209 01/01/01 ALUMINUM AND ALUMINUM-ALLOY SHEE ASTM-B210 01/01/00 ALUMINUM AND ALUMINUM-ALLOY DRAW ASTM-B211 01/01/00 ALUMINUM AND ALUMINUM-ALLOY BAR, ASTM-B221 01/01/00 ALUMINUM AND ALUMINUM-ALLOY EXTR ASTM-B241/B241M 01/01/00 ALUMINUM AND ALUMINUM-ALLOY SEAM ASTM-B308/B308M 01/01/00 ALUMINUM-ALLOY 6061-T6 STANDARD ASTM-B36/B36M 01/01/01 BRASS PLATE, SHEET, STRIP, AND R ASTM-B429 01/01/00 ALUMINUM-ALLOY EXTRUDED STRUCTUR ASTM-B633 01/01/98 ELECTRODEPOSITED COATINGS OF ZIN ASTM-D6193 01/01/97 STITCHES AND SEAMS FED-STD-595 B 1 01/11/94 COLORS USED IN GOVERMENT PROCURE MIL-A-8625 F 1 09/15/03 ANODIC COATINGS FOR ALUMINUM AND MIL-B-43436 C 2 08/24/98 BAND, MARKER, BLANK MIL-B-43436/4 3 09/08/03 BAND MARKER, BLANK. SINGLE BELT MIL-B-43436/5 3 09/08/03 BAND MARKER, BLANK, DOUBLE BELT MIL-C-16775 D 06/12/89 CHESTS, FIELD, ALUMINUM, EMPTY MIL-C-5541 E 11/30/90 CHEMICAL CONVERSION COATINGS ON Q MIL-DTL-13531 F 08/16/02 HOSE, RUBBER AND HOSE ASSEMBLY, MIL-DTL-16232 G 01/07/00 PHOSPHATE COATING, HEAVY, MANGAN MIL-DTL-53039 B 06/08/05 COATING, ALIPHATIC POLYURETHANE, MIL-DTL-53072 C 06/06/03 CHEMICAL AGENT RESISTANT COATING MIL-DTL-64159 01/30/02 COATING, WATER DISPERSIBLE ALIPH MIL-H-9850 C 1 1 10/01/97 HINGE, BUTT, CONTINOUS, PIANO Q MIL-P-53022 B 06/01/88 PRIMER, EPOXY COATING, CORROSION Q MIL-P-53030 A 2 08/20/92 PRIMER COATING, EPOXY, WATER RED MIL-PRF-20696 F 09/02/97 CLOTH,WATERPROOF, WEATHER RESIST Q MIL-PRF-23377 H 04/30/02 PRIMER COATINGS:EPOXY, HIGH-SOLI MIL-PRF-5038 J 11/05/96 TAPE, TEXTILE AND WEBBING, TEXTI MIL-STD-130 K 01/15/00 IDENTIFICATION MARKING OF U.S. M TDP: 5705427 19207 Page 5 of 8 https://content.tacom.army.mil/TDPS/ACMS/BL200710/73E051_1191581768060/atdpl.htm 8/18/2008 MIL-STD-2073-1 D 12/15/99 STANDARD PRACTICE FOR MILITARY P MIL-STD-419 D 07/13/87 CLEANING AND PROTECTING PIPING, MIL-T-8504 B 2 11/25/98 TUBING, STEEL, CORROSION-RESISTA MIL-W-12332 A 3 08/29/94 WELDING, RESISTANCE, SPOT, SEAM, MIL-W-4088 K 11/21/88 WEBBING, TEXTILE, WOVEN NYLON MS18012 MS18015 B 1 07/31/97 CATCH, CLAMPING AND STRIKE (CONC MS24593 D 2 12/01/95 VALVE, CHECK, MINIATURE HYDRAULI MS51500 C 1 08/17/99 FITTINGS, HYDRAULIC TUBE, FLARED MS51503 A 1 08/17/99 ADAPTER, STRAIGHT, PIPE TO TUBE, MS51518 A 1 08/17/99 PLUG, MACHINE THREAD, 37 DEG. FL MS51519 A 1 08/17/99 NIPPLE, TUBE, LARGE HEX FOR USE MS51523 A 1 08/17/99 TEE, TUBE TO SWIVEL, SWIVEL ON R MS51532 B 1 08/17/99 FITTINGS, HYDRAULIC TUBE, FLARED MS51534 A 1 08/17/99 REDUCER, TUBE, 37 DEGREES FLARED MS51872 MS51937 C 1 11/18/99 BOLT, EYE, SHOULDER UNC-2A AND U NAS834 04/30/98 CAP OR PLUG - PROTECTIVE, PLAIN NAS847 04/30/98 CAPS AND PLUGS, PROTECTIVE, DUST NASM20427 02/01/99 RIVET, SOLID - 100 DEG. COUNTERS NASM20613 1 04/01/02 RIVET, SOLID - UNIVERSAL HEAD, S QQ-B-636 SAE-AMS-QQ-A-200 09/01/98 ALUMINUM ALLOY 6061, BAR, ROD, S SAE-AMS-QQ-A-200/5 06/30/98 ALUMINUM ALLOY 5086, BAR, ROD, S SAE-AMS-QQ-A-200/7 06/30/98 ALUMINUM ALLOY 5456, BAR, ROD, S SAE-AMS-QQ-A-225 06/30/98 ALUMINUM AND ALUMINUM ALLOY, BAR SAE-AMS-QQ-A-250 08/01/97 ALUMINUM AND ALUMINUM ALLOY, PLA SAE-AMS-QQ-P-416 A 02/01/02 PLATING, CADMIUM (ELECTRODEPOSIT SAE-AMS-QQ-S-763 07/01/98 STEEL BARS, WIRE, SHAPES, AND FO SAE-AS28775 09/01/00 PACKING, PREFORMED, HYDRAULIC, + SAE-J343 01/01/00 SAE 100R SERIES HYDRAULIC HOSE A SAE-J514 07/01/01 HYDRAULIC TUBE FITTINGS SAE-J516 01/01/01 HYDRAULIC HOSE FITTINGS JANUARY SAE-J517 04/01/01 HYDRAULIC HOSE SSPC-PAINT30 08/01/92 WELD-THROUGH INORGANIC ZINC PRIM TT-C-490 E 07/22/02 CLEANING METHODS FOR FERROUS SUR V-T-295 E 08/01/85 THREAD, NYLON WW-T-700/5 E 1 04/19/01 TUBE, ALUMINUM ALLOY, DRAWN, SEA WW-T-700/6 F 2 1 04/19/01 TUBE, ALUMINUM ALLOY, DRAWN, SEA * - NOT FURNISHED - TO BE OBTAINED FROM STANDARDIZATION DOCUMENTS ORDER DESK, BLD PHILADELPHIA, PA 19111-5094 - IF NOT AVAILABLE, IMMEDIATELY ADVISE THE PROCUR ** - NOT FURNISHED - COMMERCIAL SPECIFICATIONS AND STANDARDS MAY BE OBTAINED FROM THEY ARE NOT AVAILABLE FROM GOVERNMENT SOURCES. Q - THE LETTER (Q) BEFORE THE SPECIFICATION NUMBER INDICATES THAT A QUALIFIED PRO IS REQUIRED. THE NUMBER OF THE QPL IS THE SAME AS THE NUMBER OF THE SPECIFIC NOTICE: UNLESS OTHERWISE NOTED, ALL MIL-STD'S ARE USED FOR REFERENCE ONLY OR HAVE BE (I/M = INTERFACE PRACTICE / USE OF STD IS MANDATORY) REPLACED SPECIFICATIONS AND STANDARDS DOC NUMBER REPLACEMENT INFORMATION ==================================================================================== ANSI-B18.2.1 REPLACED BY ASME-B18.2.1 ANSI-Y14.5M REPLACED BY ASME-Y14.5M ASTM-A109 REPLACED BY ASTM-A109/A109M ASTM-A240 REPLACED BY ASTM-A240/A240M ASTM-A366 REPLACED BY ASTM-A366/A366M ASTM-A366/A366M DISCONTINUED IN 2000; REPLACED BY ASTM A 1008/A1008M TDP: 5705427 19207 Page 6 of 8 https://content.tacom.army.mil/TDPS/ACMS/BL200710/73E051_1191581768060/atdpl.htm 8/18/2008 OZONE DEPLETING CHEMICALS LIST THE FOLLOWING SPECIFICATIONS AND STANDARDS REQUIRE REVIEW FOR ELIMINATION OF OZONE DEPLETING CHEMICALS IN ACCORDANCE WITH PL 102-484, NATIONAL DEFENSE AUTHORIZATION ACT FOR FISCAL YEAR 2000 DOCUMENT NUMBER CHEMICALS PADDS CLAUSE ==================================================================================== MIL-DTL-53072 TCA CS6444 V-T-295 TCA, Carbon Tet CS6444 SPECIAL PROCESS CLAUSES DOCUMENT NUMBER PADDS CLAUSE ==================================================================================== MIL-C-5541 ES7450 MIL-DTL-53039 ES7450 MIL-DTL-53072 ES7450 MIL-DTL-64159 ES7450 MIL-W-12332 ES7146 TT-C-490 ES7146 AND ES7450 SPECIAL PROCESS CLAUSES Page 1 of 1 https://content.tacom.army.mil/TDPS/ACMS/BL200710/73E051_1191581768060/ozone.h... 8/18/2008 email for the drawings or further information (craig.riedel@us.army.mil)including the drawings. I have all of the data bundled so it can go out in a single email. all kits will be shipped to Anniston Army Depot (none to Red River). Craig ___________________________________________ Craig Riedel HSTRU System Acquisition Manager Sets, Kits, Outfits, and Tools Joint Combat Support Systems Project Office DSN: 793-0323 / Comm: 309-782-0323 BlackBerry: 309-716-6137 NIPR: craig.riedel@us.army.mil SIPR: craig.riedel@us.army.smil.mil
 

Web Link

FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=6ecdd408f20263447ddec57f5da51e2f&tab=core&_cview=1)
 

Place of Performance

Address: TACOM - Rock Island ATTN: AMSTA-AQ-AR, Rock Island Arsenal Rock Island IL<br />

Zip Code: 61299-7630<br />
 

Record

SN01665169-W 20080911/080909223506-6ecdd408f20263447ddec57f5da51e2f (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |