Loren Data's SAM Daily™

FBO DAILY ISSUE OF SEPTEMBER 14, 2008 FBO #2484
DOCUMENT

71 -- Consoles for 266 RANS - Floor Plans

Notice Date

9/12/2008
 

Notice Type

Floor Plans
 

NAICS

337214 — Office Furniture (except Wood) Manufacturing
 

Contracting Office

Department of the Air Force, Air Combat Command, 366 CONS, 366 Gunfighter Ave Ste 498, Mountain Home AFB, Idaho, 83648-5258
 

ZIP Code

83648-5258
 

Solicitation Number

F3F1S18243A001
 

Point of Contact

Diana D. Curl,, Phone: 2088286487, John M Hofmann,, Phone: 208-828-3107
 

E-Mail Address

diana.curl@mountainhome.af.mil, john.hofmann@mountainhome.af.mil
 

Small Business Set-Aside

N/A
 

Description

COMBINED SYNOPSIS / SOLICITATION (i) This is a combined synopsis/solicitation for commercial items in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and written solicitation will not be issued. (ii) Request for Quote (RFQ) F3F1S18243A001 is a combined synopsis/solicitation for commercial items. This combined synopsis/solicitation is issued as a RFQ. Submit written offers only, oral offers will not be accepted. All firms or individuals responding must be registered with the Central Contractor Registration (CCR). (iii) This combined synopsis/solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-26 and through Department of Defense Acquisition Regulation Change Notice 20080812. It is the contractor's responsibility to be familiar with applicable clauses and provisions. Clauses and provisions can be found at: http://farsite.hill.af.mil/vffar1.htm (iv) This procurement is being issued as UNRESTRICTED. North American Industrial Classification Standard: 337214; Small Business Size Standard: 500 employees (v) Design custom steel consoles to the following specifications: Minimum of 34 inches of usable desk surface width. Assembled console base size to be within 29-30 inches in height, 36-37 inches in width, and 21.5-22.5 inches in depth. Laminate writing surface to be 12 inches deep and conforming to the contours of the separate console areas. All exposed console surfaces to be black in color to match existing ETVS TED turrets. Mounting area must be provided in writing surface for ETVS jack box. Must have cubby hole 2 inches in height, 9 inches in width, and 9 inches in depth in writing surface face to accommodate checklists. Must have louvered locking panels for front of all bases, and side panels for all exposed sides. All consoles except for two must have a hole drilled in writing surface for pole mount for flat panel monitors, centered between edge of ETVS TED turret and console edge. For further information see attached floor plans. CLIN (0001) Deliver the following items for assembly at 266 RANS/DOT: 16 EA BASE FRAME 22 inch D X 29.5 inch H X 36.06 inch W; 16 EA REAR PANEL; 16 EA LOUVERED LEFT HINGE FRONT DOOR; 16 EA SHORT PULL-OUT SHELF; 16 PR MOUNTING ANGLES; 16 EA 34 LAMINATE TOP PANEL; 2 EA 22 inch D X 29.5 inch h X 21.06 inch W; 2 EA 19 REAR PANEL; 2 EA LOUVERED LEFT HINGE SURFACE DOOR; 2 EA PULL-OUT SHELF; 2 PR MOUNTING ANGLES; 2 EA 19 LAMINATE TOP PANEL; 2 EA 45 DEGREE WEDGE; 3 EA SIDE/END PANEL; 5 EA OL/R SIDE/END PANEL; All work surfaces will conform to the contours of the defined areas as shown on the layout (TD, GCI, RTO, and MCD/T) and attach securely to the metal desk base. All work surfaces to be approximately 12 inches in depth, 3-6 inches in height, and length as shown below. All work surfaces to have the "checklist cutout" as defined in the drawing for each operator position. 1 EA WS3 WORK SURFACE, length 144 inches; 1 EA WS4 WORK SURFACE, length 216 inches; 1 EA WS5 WORK SURFACE, length 108 inches; 1 EA WS6 WORK SURFACE, length: see "odd dimensions" graphic. Angles in graphic are 45 degree angles; 3 EA COUNTER HEIGHT FRAME 22 inch DX36.5 inch HX32.06 inch W; 3 EA REAR PANEL; 1 EA HEADSET STORAGE; 2 EA BOOK SHELVES; 2 EA 5.25 inches DRAWER; 1 EA 7.00 inches DRAWER; 1 EA 10.50 inch DRAWER; 2 EA SIDE/END PANEL; 1 EA COUNTER TOP; 16 EA POLE MOUNT; 10 EA SINGLE SCISSOR ARM; 6 EA DOUBLE SCISSOR ARM CLIN (0002) 10 EA BASE FRAME 22 inch D X 29.5 inch H X 36.06 inch W; 10 EA REAR PANEL; 10 EA LOUVERED LEFT HINGE FRONT DOOR; 10 EA SHORT PULL-OUT SHELF; 10 PR MOUNTING ANGLES; 10 EA 34 LAMINATE TOP PANEL; 2 EA 45 DEGREE WEDGE; 6 EA SIDE/END PANEL; 2 EA OL/R SIDE/END PANEL; All work surfaces will conform to the contours of the defined areas as shown on the layout (INTEL, BC BACK, BC FRONT) and attach securely to the metal desk base. All work surfaces to be approximately 12 inches in depth, 3-6 inches in height, and length as shown below. All work surfaces to have the "checklist cutout" as defined in the drawing for each operator position.1 EA WS0 WORK SURFACE, length 36 inches; 1 EA WS1 WORK SURFACE, length 72 inches; 1 EA WS2 WORK SURFACE, Length: see "odd dimensions" graphic. Angles in graphic are 45 degree angles; 8 EA POLE MOUNT; 8 EA SINGLE SCISSOR ARM; 0 EA DOUBLE SCISSOR ARM (vi) FOB-Destination for delivery to: 80 Bomber Road, Building 1795, Rooms six & seven. Delivery NLT 31 December 2008. Responsibility and Inspection: Unless otherwise specified in the contract or purchase order, the supplier is responsible for the performance of all inspection requirements and Quality Control (QC). (vii) The Government will award a firm-fixed price contract resulting from this combined synopsis/solicitation to the responsible offeror whose offer conforming to the synopsis/solicitation will be most advantageous to the Government, price and other factors considered. Award shall be based on All or None and Best Value to the Government. Best value can include but is not limited to price, delivery date, and technical capability. (viii) The clause at FAR 52.212-4 Contract Terms and Conditions-Commercial Items, applies to this acquisition. FAR 52.212-4 addendum is also included. (ix) The following provisions and clauses apply to this acquisition: FAR 52.222-3 Convict Labor; FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies; FAR 52.222-21 Prohibition of Segregated Facilities; FAR 52.222-26 Equal Opportunity; FAR 52.222-36 Affirmative Action for Workers with Disabilities; FAR 52.225-13 Restrictions on Certain Foreign Purchases; FAR 52.233-3 Protest After Award; FAR 52.233-4 Applicable Law for Breach of Contract Claim; FAR 52.247-34 F.O.B.-Destination; FAR 52.252-2 Clauses Incorporated by Reference; FAR 52.252-6 Authorized Deviations in Clauses; DFARS 252.204-7004 Alternate A; DFARS 252.225-7001 Buy American Act and Balance of Payment Program; DFARS 252.225-7002 Quailifying Country Sources as Subcontractors; DFARS 252.232-7003 Electronic Submission of Payment Requests; DFARS 252.247-7023 Transportation of Supplies by Sea, and AFFARS 5352.201-9101 Ombudsmen (see below POC) **Raymond Carpenter, HQ ACC/A7K 129 Andrews Street Suite 122, Langley AFB VA 23665-2791, phone:(757) 764-5371 fax:(757) 764-4400 email: raymond.carpenter@langley.af.mil ** (x) The clause at FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Item (DEVIATION). (xi) The clause at DFAR 252.212-7001 Contract Terms and Conditions Required to Implement Statues or Executive Orders applicable to Defense Acquisition of Commercial Items (DEVIATION). (xii) The provision at FAR 52.212-1 Instructions to Offerors-Commercial Items, applies to this acquisition. (xiii) The clause at FAR 52.212-3 Offeror Representations and Certifications - Commercial Items, applies to this acquisition. Complete only paragraph (j) of this provision if the annual representations and certificates have been completed electronically at http://orca.bpn.gov. If the annual representations and certifications has not been completed electronically at the ORCA website, then only paragraphs (b) through (i) of this provision need to be completed. (xiv) Numbered Notes (xv) Quotes must be emailed to Diana Curl at diana.curl@mountainhome.af.mil and John Hofmann at john.hofmann@mountainhome.af.mil, or faxed to (208) 828-6486. Quotes are required to be received no later than 12:00 local, 18 September 2008.
 

Web Link

FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=11fabb1da4ed3940a7772cbfdc630918&tab=core&_cview=1)
 

Document(s)

Floor Plans
 

File Name: Dimensions for odd shaped work station (WS) 2 and WS6. (odd dimensions.JPG)

Link: https://www.fbo.gov//utils/view?id=3d0609ed7917a52532137c411fbd42a1

Bytes: 46.22 Kb
 

File Name: Dimensions of room that furniture must fit into. There are two tabs to this worksheet. One is for room 6, and one is for room 7. (Room Dimesions.xls)

Link: https://www.fbo.gov//utils/view?id=523102077cf2a2308933e10a54d7553a

Bytes: 205.00 Kb
 

File Name: Dimensions of consoles. (Config 1 mod C.xls)

Link: https://www.fbo.gov//utils/view?id=f8103fb9016b7bd7b77f6381565ecbf4

Bytes: 338.50 Kb
 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Place of Performance

Address: 80 Bomber Road, Building 1795, Rooms six and seven, Mountain Home AFB, Idaho, 83648, United States

Zip Code: 83648
 

Record

SN01668794-W 20080914/080912221838-11fabb1da4ed3940a7772cbfdc630918 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |