PRESOL | 66 | THAAD Radar Test Equipment

FBO DAILY ISSUE OF OCTOBER 01, 2008 FBO #2501
SOLICITATION NOTICE

66 -- THAAD Radar Test Equipment

Notice Date: 9/29/2008
Notice Type: Modification/Amendment
Contracting Office: Department of the Army, Army Contracting Agency, South Region, ACA, White Sands Missle Range, Bldg 143 Crozier, White Sands Missile Range, NM 88002
ZIP Code: 88002
Solicitation Number: W81C398211DS01
Response Due: 8/18/2008
Archive Date: 2/14/2009
Point of Contact: Name: Cynariah Wilkins, Title: Contract Specialist, Phone: 5756781931, Fax: 575-678-4975
E-Mail Address: cynariah.wilkins_wsmr@us.army.mil;
Small Business Set-Aside: Total Small Business
Description: CANCELLATION NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is W81C398211DS01 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-24. The associated North American Industrial Classification System (NAICS) code for this procurement is 334515 with a small business size standard of 500 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2008-08-18 12:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be White Sands Missle Range, NM 88002 The USA ACA White Sands Missile Range requires the following items, Brand Name or Equal, to the following: LI 001, Network Analyzer: Agilent-HP 8720C 1/10 HP 8720C/1/10 OR EQUAL Network Analyzer, 50Hz-20GHz The Agilent 8720C vector network analyzer characterizes RF and microwave components down to 50 MHz and up to 20 GHz. This analyzer includes a fast-sweeping synthesized source, S-prameter test set, turned receiver, and large color display in a single package., 1, EA; LI 002, Power Meter HP Agilent 436A Power Meter Option 22 GPIB (436A) or equal, 1, EA; LI 003, Fluke Multimeter Fluke 8845A/8846A 6.5 digit Precision Multimeters, 1, EA; LI 004, VME Bus Analyzer VME Bus Analyzer; model VME64/2eSST or equal, 1, EA; LI 005, Synthesized Signal Generator The Agilent HP 8672A Synthesized Signal Generator is a synthesized signal generator featuring calibrated and leveled output, am/fm modulation capability, and full programmability, 1, EA; LI 006, Infrared Thermometer Profess. Equip T7350 or equal, 1, EA; LI 007, Spectrum Analyzer The Agilent ESA-E Series E4407B-ESA-E or equal., 1, EA; LI 008, Tektronix Oscilloscope 4 Channel DPO 1 GHz, 5 GS/s, 4 channel digital phosphor oscilloscope Includes: (1) P5050 500 MHz, 10x passive probe per channel, Accessory Pouch (016c1935c00), Front Cover (200-4651-00), Mouse (119-6936-00), Quick Start User Manual, TDS5000B Product Software CD-ROM, TDS5000B Operating System Restoration CD-ROM, GPIB Programmer's Reference, Optional Applications Software CD-ROM, Getting Started with OpenChoice? book (020-2513-00), Performance Verification Procedure PDF file, Calibration Certificate Documenting NIST Traceability, Z540-1 Compliance, and ISO9001 Registration, Power Cord., 1, EA; LI 009, Crystal Detector HP 423B/ Agilent 0.01 to 12.4 GHz, BNC female/Type N male or equal., 1, EA; LI 010, P-Series Power Meter, Dual Channel The N1911/12A P-Series power meter with N192XA wide band power sensors provide a measurement frequency range from 50 MHz to 40 GHz with an internal zero and calibration capability. LXI-C Compliance, 1, EA; LI 011, Scopemeter 200MHZ/2.5GS/s Fluke 199CM 200 MHz Color Scopemeter BC190 Battery Charger/Line Voltage Adapter BP190 NiMH Battery Pack VPS200-G Voltage Probe (200 MHz, 10:1), Grey VPS200-R Voltage Probe (200 MHz, 10:1), Red TL75 Hard Point Test Lead Set OC4USB Serial Interface Adapter/Cable C190 Hard Case FlukeView ScopeMeter Software MA190 Medical Accessory Kit Medical Software Extension User manual (CD-ROM) Getting started booklet, 1, EA; LI 012, Standard Gain FR Horn 8.2-12.4 GHZ Standard Gain Horns model# 640; Frequency (Low) in MHz 8,200; Frequency (High) in MHz 12,400., 1, EA; LI 013, Fiber Optics Borescope and light source OLYMPUS Part # IF6C5-20 VIDEOSCOPE, BORESCOPE, FIBERSCOPE, 1, EA; LI 014, Standard Tool Set and Tool Chest Snap-on Standard Tool Set and Tool Chest, 1, EA; LI 015, Cable RG58C/U 12ft length (BNC Male to BNC Male) Pasternack PE067-144 or eual BNC MALE TO BNC MALE; 50 OHM, RG58C/U COAX, *USES STANDARD 50 OHM INTERFACE CONNECTORS*, 1, EA; LI 016, Cable RG58C/U 6ft length (BNC Male to BNC Male) Pasternack PE067-72 or equal BNC MALE TO BNC MALE50 OHM, RG58C/U COAX, 72" CABLE LENGTH, *USES STANDARD 50 OHM INTERFACE CONNECTORS*, 1, EA; LI 017, Adapter BNC Male to BNC Male Pasternack PE9000 Adapter BNC Male to BNC Male or equal, 1, EA; LI 018, Adapter BNC Female to BNC Female Pasternack PE9084 or equal BNC Female to BNC Female, 1, EA; LI 019, Adapter BNC "T" Female-Female-Female Pasternack PE9003 or equal BNC "T" Female-Female-Female, 1, EA; LI 020, 50Ω Termination BNC Male Pasternack PE6000-50 or equal, BNC MALE RESISTOR TERMINATION RESISTOR IMPEDANCE: 50 OHMS1% TOLERANCE, 1/2 WATT MAX. DISSIPATION, 1, EA; LI 021, 50Ω Termination BNC Female Pasternack PE6027-50 or equal BNC FEMALE RESISTOR TERMINATION RESISTOR IMPEDANCE: 50 OHMS 1% TOLERANCE, 1/2 WATT MAX. DISSIPATION, 1, EA; LI 022, Diode Detector 10MHZ-12.4GHZ Agilent 423B Low-Barrier Schottky Diode detector 10MHZ-12.4GHZ Input "N", Output "BNC" or equal., 1, EA; LI 023, Adapter N Male to N Male Pasternack PE9007 N MALE TO N MALE COAXIAL ADAPTER or equal, 1, EA; LI 024, Adapter N Female Right Angle to N male Pasternack 9086 N FEMALE RIGHT ANGLE TO N MALE COAXIAL ADAPTER or equal, 1, EA; LI 025, Adapter SMA Male to N Male Pasternack 9080 SMA MALE TO N MALE COAXIAL ADAPTER or equal., 1, EA; LI 026, Adapter SMA Female to N Male Pasternack PE9081SMA FEMALE TO N MALE COAXIAL ADAPTER or equal., 1, EA; LI 027, Adapter SMA Male to N Female Pasternack PE9082 SMA MALE TO N FEMALE COAXIAL ADAPTER or equal., 1, EA; LI 028, Adapter SMA Female to N Female Pasternack PE9083 SMA FEMALE TO N FEMALE COAXIAL ADAPTER or equal., 1, EA; LI 029, Adapter N Female to Male (Saver) S&M Electronics model# SM 4017 'Adapter N Female to Male" with N ADAPTER M/F S STEEL 18 GHZ VSWR 1.15 ROHS or equal, 1, EA; LI 030, 50Ω Termination N Male 50Ω Termination N Male Pasternack model # PE6001-50 or equal with N MALE RESISTOR TERMINATION RESISTOR IMPEDANCE: 50 OHMS 1% TOLERANCE, 1/2 WATT MAX. DISSIPATION., 1, EA; LI 031, 50Ω Termination N Female 50Ω Termination N Female Pasternack model# PE6028-50 or equal with N FEMALE RESISTOR TERMINATION RESISTOR IMPEDANCE: 50 OHMS 1% TOLERANCE, 1/2 WATT MAX. DISSIPATION., 1, EA; LI 032, 10W DC to 12.4GHZ N Attenuator 10DB 10W DC to 12.4GHZ N Attenuator 10DB Pasternack model# PE7048-10 with 10 WATT, DC TO 12 GHz N ATTENUATORIMPEDANCE: 50 OHMS ATTENUATION: 10 dB or equal., 1, EA; LI 033, 10W DC to 12.4GHZ N Attenuator 20DB 10W DC to 12.4GHZ N Attenuator 20DB Pasternack model# PE7048-20 with 10 WATT, DC TO 12 GHz N ATTENUATORIMPEDANCE: 50 OHMS ATTENUATION: 20 dB or equal., 1, EA; LI 034, 10 DC to 12.4GHZ N Attenuator 6DB 10W DC to 12.4GHZ N Attenuator 6DB Pasternack model# PE7048-6 with 10 WATT, DC TO 12 GHz N ATTENUATORIMPEDANCE: 50 OHMS ATTENUATION: 6 dB or equal., 1, EA; LI 035, Cable RF RG401/U 6ft lenght SMA Male to SMA Male Pasternack model# PE34188-60 SMA MALE TO SMA MALE50 OHM, PE-SR401FL (.250" RE-SHAPABLE)60" CABLE LENGTH or equal., 1, EA; LI 036, Adapter SMA Female to SMA Female Pasternack model# PE9070 SMA FEMALE TO SMA FEMALE COAXIAL ADAPTER or equal., 1, EA; LI 037, Adapter SMA Male to SMA Male Adapter SMA Male to SMA Male Pasternack model# PE9069 SMA MALE TO SMA MALE COAXIAL ADAPTER or equal., 1, EA; LI 038, Adapter SMA Female to SMA Male Right Angle Adapter SMA Female to SMA Male Right Angle Pasternack model# PE9068 SMA FEMALE TO SMA MALE RIGHT ANGLE COAXIAL ADAPTER or equal, 1, EA; LI 039, 50Ω Termination SMA Male 50Ω Termination SMA Male Pasternack model# PE6081 with SMA MALE PRECISION TERMINATION (WITHOUT CHAIN)POWER HANDLING CAPACITY: 2 WATTS FREQUENCY RANGE: DC TO 18 GHz MAXIMUM VSWR: 1.30 or equal., 1, EA; LI 040, 50Ω Termination SMA Female 50Ω Termination SMA Female Pasternack model# PE6083 with SMA FEMALE PRECISION TERMINATION (WITHOUT CHAIN)POWER HANDLING CAPACITY: 2 WATTS FREQUENCY RANGE: DC TO 18 GHz MAXIMUM VSWR: 1.30 or equal., 1, EA; LI 041, Adapter N Female to Female N Female to N Female Coaxial Adapter, 1, EA; LI 042, Economy Mechanical Calibration Kit The Agilent 85054D economy mechanical calibration kit contains precision standard devices to chariacterize the systematic errors of Agilent network analyzers in the type-N interface., 1, EA; For this solicitation, USA ACA White Sands Missile Range intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USA ACA White Sands Missile Range is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Buyers and Sellers understand that FedBid ranks all bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified herein below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) directly to cynariah.wilkins@us.army.mil (NOT THROUGH FEDBID.COM) so that they are received at that email address no later than the closing date and time for this solicitation. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. Delivery shall be made within 30 days or less after receipt of order (ARO). CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov.
Web Link: FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=f2ef774e0142e4c41e0f234b46cd4e00&tab=core&_cview=1)
Place of Performance: Address: White Sands Missle Range, NM 88002<br />; Zip Code: 88002<br />
Record: SN01684404-W 20081001/080929220139-f2ef774e0142e4c41e0f234b46cd4e00 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

66 -- THAAD Radar Test Equipment