SOLICITATION NOTICE
28 -- F110 Stator Compressor Assy
- Notice Date
- 10/7/2008
- Notice Type
- Presolicitation
- NAICS
- 336412
— Aircraft Engine and Engine Parts Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker OC-ALC - (Central Contracting), 3001 Staff Drive, Ste 1AG76A, Tinker AFB, Oklahoma, 73145-3015
- ZIP Code
- 73145-3015
- Solicitation Number
- SPRTA109R80445
- Archive Date
- 12/6/2008
- Point of Contact
- Joe A. Starzenski, Phone: 405 739-4476
- E-Mail Address
-
joe.starzenski@tinker.af.mil
- Small Business Set-Aside
- N/A
- Description
- Item: 0001 NSN: 2840015275825PRPR FORWARD COMPRESSOR STATOR ASSY P/N: 2215M15G01, Description: The ITEM DESCRIPTION is: The compressor stator front case assembly consists of the following components (1) Compressor stator front case halves (2) Six stages of vanes with shrouds (IGV through stage 5) and five stages with seals (stages 1 through 5) (3) Five stages of removable rub liners (4) Stage 5 bleed air manifolds (5) Four stages of vane actuation rings The compressor stator front case is split into upper and lower halves, which are joined by bolted horizontal flanges. This allows for removal of upper stator only for access to compressor rotor for blade replacement. The compressor stator case lower half has borescope ports at stage 4 and stage 8 for installed engine inspection. There are four stages of variable vanes: inlet guide vanes (IGV), stage 1, 2, and 3 vanes. These vanes have removable shrouds and seals. There are two stages of fixed vanes, stages 4 and 5. These vanes are in multiple vane sectors, which slide into circumferential slots in case. These stages have removable inner seals and retainers. Bleed air manifold castings are bolted to casing aft of stage 5 vanes. Stage 5 compressor air travels from flowpath into a forward manifold for use as low pressure turbine (LPT) cooling air, and into a larger aft manifold for use as customer bleed and engine anti-icing air. This aft manifold has pressure-operated valves to prevent reverse flow of bleed air. The FUNCTION is Direct airflow at optimal angles onto the stages of Blades that immediately follow each vane sector. The variable vanes also assist in reducing compressor stalls. The DIMENSIONS are: Nominal diameter is 36.00 inches Height ~36.00 inches Weight ~ 90.0 lbs The MATERIAL consists of titanium. Total Line Item Qty: 1.0000 Applicable to: None Destn: FB2039,Tinker AFB,OK.,73145-9013. Delivery: 29JAN2010, 1.00 Electronic procedure will be used for this solicitation. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received within forty five-days (thirty days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A Determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. See Note(s) 25 and 26. A firm fixed price type contract is contemplated. Estimated issue date is 22 Oct 08 and the estimated close date is 21 Nov 08. New Manufactured Material/Spare. AMC: 4D Application is F110 Engine. UID is required if the unit price exceeds $5,000. Requirement is not a Small Business Set-Aside. Requirement is Sole Source to General Electric. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed: GE, Cincinnati OH. Based on market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. Only written, e-mail, or faxed requests received directly from the requestor are acceptable. All responsible sources solicited may submit a bid, proposal, or quotation, which shall be considered. Reply Fax Number is (405)734-8106, ATTN: Joe Starzenski. <EMAIL> <ADDRESS> joe.starzenski@tinker.af.mil <DESC>Joe Starzenski <SETASIDE>N/A </PRESOL>
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=e46b4746d24691ab112682818f2f8788&tab=core&_cview=1)
- Place of Performance
- Address: 1 Neumann Way, Cincinnati, Ohio, 45215, United States
- Zip Code: 45215
- Zip Code: 45215
- Record
- SN01689025-W 20081009/081007214956-e46b4746d24691ab112682818f2f8788 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |