SOURCES SOUGHT
20 -- DRYDOCK FOR USCGC PEA ISLAND 110 FT PATROL BOAT
- Notice Date
- 10/9/2008
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102
- ZIP Code
- 23510-9102
- Solicitation Number
- USCGCPEAISLAND
- Response Due
- 10/20/2008
- Point of Contact
- Nancy M Brinkman,, Phone: 757-628-4579, Michael E Monahan,, Phone: 757-628-4639
- E-Mail Address
-
Nancy.M.Brinkman@uscg.mil, michael.e.monahan@uscg.mil
- Small Business Set-Aside
- N/A
- Description
- The United States Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns, for Service-Disabled Veteran-Owned Small Business Concerns (SDVOSB) or for Small Business. The estimated value of this procurement is between $250,000.00 and $500,000.00. The small business size standard is less than 1,000 employees. The NAICS Code is 336611. The acquisition is for DRYDOCK repairs to a USCGC PEA ISLAND (WBP-1347) 110 FOOT C CLASS PATROL BOAT. The vessel is homeported in Key West, FL. All work will be performed at the contractor’s facility. The performance period will be FORTY-TWO (42) calendar days with a start date on or about 16 March 2009 through 26 April 2009. The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC PEA ISLAND (WBP-1347) 110 FOOT C CLASS PATROL BOAT. This work will include, but is not limited to: 1.Routine Drydocking 2.Provide Temporary Logistics 3.Clean and Inspect Fuel Service Tanks 4.Clean and Inspect Fuel Stowage and Overflow Tanks 5.Clean and Inspect Oil and Oily Waste Tanks 6.Preserve Oil and Oily Water Tanks - 100% 7.Preserve Oil and Oily Water Tanks - Partial 8.Clean and Inspect Sewage Collection and Holding Tanks 9.Clean and Inspect Grey Water Collection and Holding Tanks 10.Preserve Sewage Collection and Holding Tanks - 100% 11.Preserve Sewage Collection and Holding Tanks - Partial 12.Preserve Grey Water Collection and Holding Tanks - 100% 13.Preserve Grey Water Collection and Holding Tanks - Partial 14.Clean Sewage Piping System 15.Clean Grey Water Piping System 16.Preserve and Disinfect Potable Water Tanks - 100% 17.Preserve Forward Peak Compartment 18.Preserve Forward Void 19.Renew Floating Deck System in Galley and Mess Deck 20.Clean and Inspect Heat Exchangers 21.Overhaul Stabilizing Fins 22.Inspect MDE Exhaust System 23.Overhaul and Renew Sea Valves 24.Overhaul and Renew Firemain Valves 25.Overhaul and Renew ASW Valves 26.Overhaul and Renew Bilge and Ballast Valves 27.Remove, Inspect, and Reinstall Propellers 28.Repair Propeller Root Erosion 29.Remove, Inspect, and Reinstall Propeller Shafts 30.Overhaul Mechanical Shaft Seal Assemblies 31.Inspect and Maintain Cathodic Protection System 32.Renew Water-Lubricated Propeller Shaft Bearings 33.Inspect Bronze Sleeves in Various Areas 34.Remove, Inspect and Reinstall Rudder Assemblies 35.Overhaul Steering Gear Components 36.Renew Speed Doppler 37.Renew Depth Indicating Transducer 38.Preserve Underwater Body – “100%” 39.Preserve Underwater Body - "Partial" 40.Renew Capastic Fairing 41.Renew Insulation in Various Compartments 42.Install Cofferdams in Galley 43.Complete Reverse Osmosis Watermaker EC 44.Install Main Diesel Engine Duplex Sea Strainers 45.Renew Cofferdam Bilge Pipe 46.Renew Sewage System Piping 47.Perform Hull Repairs 48.Ultrasonic Thickness Measurements 49.Renew Steel Shell Plating (5-pound) 50.Renew Steel Shell Plating (7.65-pound) 51.Renew Steel Shell Plating (10.2-pound) 52.Renew Steel Structural Plating (5-pound) 53.Renew Steel Structural Plating (7.65-pound) 54.Renew Aluminum Structural Plating 55.Renew Eroded Aluminum Welds 56.Renew Eroded Steel Welds 57.Perform Overlay Welding (Aluminum) 58.Perform Overlay Welding (Steel) 59.Welding Repairs – Crack (Steel) 60.Welding Repairs – Crack (Aluminum) All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. In accordance with FAR 19.1305, if your firm is HUBZone certified or FAR 19.1404 if you firm is SDVOSB or FAR 19.501 if your firm is a Small Business and intends to submit an offer on this acquisition, please respond by e-mail to Nancy.M.Brinkman@uscg.mil or by fax (757) 628-4676. Questions may be referred to Nancy Brinkman at (757) 628-4579. In response please include the following: (a) a positive statement of your intent to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and phone numbers. At least two (2) references are requested, but more are desirable. Your response is required by October 20, 2008. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone, Service-Disabled Veteran-owned Small Business set aside or Small Business set aside. Failure to submit all information requested may result in an unrestricted acquisition. A decision on whether this will be pursued as a HUBZone or SDVOSB small business set aside, or a Small Business set aside, will be posted on the FedBizOps website at http://www.fedbizopps.gov.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=37d4b0c8752c5c1278446765be0eaf1e&tab=core&_cview=1)
- Place of Performance
- Address: CONTRACTORS FACILITY, United States
- Record
- SN01690450-W 20081011/081009214548-37d4b0c8752c5c1278446765be0eaf1e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |