SOLICITATION NOTICE
95 -- Tainter Valve Replacement at The Dalles and John Day Dams USACE, Portland, OR
- Notice Date
- 10/16/2008
- Notice Type
- Presolicitation
- NAICS
- 332312
— Fabricated Structural Metal Manufacturing
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, U.S. Army Engineer District, Portland, Portland District, US Army Corps of Engineers, Contracting Division (CENWP-CT_, P.O. Box 2946, Portland, OR 97208-2946
- ZIP Code
- 97208-2946
- Solicitation Number
- W9127N-08-Q-0075
- Response Due
- 12/15/2008
- Archive Date
- 2/13/2009
- Point of Contact
- Amy Kelm, 503-808-4606<br />
- Small Business Set-Aside
- Total Small Business
- Description
- The tainter valve is a reverse tainter gate system which includes the valve and control systems. The Contract Work includes furnishing all services, materials and equipment to fabricate new tainter valves (it is projected that 3 to 5 tainter gates will need to be supplied), remove the existing and install the new tainter valves in the navigation locks at The Dalles and John Day Dam. That work shall include, but not be limited to, fabrication and painting of new valves, seals and seal plates, demolition and disposal of the existing grease system (includes all lines and Farval greasing devices), replacement of all trunnion pins and bushings, replacement of crosshead and lifting rod bushings, adjustment of pressure relief valve setpoint (at John Day only) and installation of a new tainter valve. The tainter valve can be transported by road. Please note the following: 1). All major structural steel components shall be ASTM A709, GR 50. There are some ASTM A304 stainless required for seal plates. 2). The fabricator shall be AISC certified. All welding shall be done according to AWS D1.5. All welder qualifications shall meet the requirements outlined in AWS D1.5. 3). All fabrication and fit up tolerances shall meet requirements from AISC, Chapter M, Fabrication, Erection and Quality Control. 4). Approximate weight for each tainter valve is 45,000 lbs. 5). Each finished fabricated tainter valve shall be stressed relieved. 6). A minimum of 2 cranes shall be needed for removal of the original tainter valve and installation of the new tainter valve. The administrative point is Amy Kelm (503) 808-4606, email Amy.A.Kelm@usace.army.mil. The solicitation will available via the internet only. Downloading of the package will be available either FedBizOpps.gov (https://www.fbo.gov/) and/or Army Single Face to Industry (https://acquisition.army.mil/asfi/default.cfm). Offerors are responsible for checking the referenced pages for any update(s) to the Notice. The Government is not responsible for any loss of Internet connectivity or for an offerors inability to access the document posted at the referenced website(s). To obtain automatic notifications of updates to this solicitation, you MUST register at the site(s) to receive such notifications. The Solicitation Package will be available for download in the November/December, 2008 timeframe
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=e3cdd197a3171aa27b113a75fe833702&tab=core&_cview=1)
- Place of Performance
- Address: Portland District, US Army Corps of Engineers Contracting Division (CENWP-CT_, P.O. Box 2946 Portland OR<br />
- Zip Code: 97208-2946<br />
- Zip Code: 97208-2946<br />
- Record
- SN01692515-W 20081018/081016214624-e3cdd197a3171aa27b113a75fe833702 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |