SOLICITATION NOTICE
Y -- Design-Build F-22 Heavy Maintenance & Composite Back Shop
- Notice Date
- 10/20/2008
- Notice Type
- Presolicitation
- NAICS
- 236210
— Industrial Building Construction
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, US Army Engineer District, Sacramento, US Army Engineer District, Sacramento, 1325 J. Street, Sacramento, CA 95814
- ZIP Code
- 95814
- Solicitation Number
- W91238-09-R-0001
- Response Due
- 12/9/2008
- Archive Date
- 2/7/2009
- Point of Contact
- Connie L Newell, 916-557-5229<br />
- Small Business Set-Aside
- N/A
- Description
- This acquisition is proceeding as UNRESTRICTED FULL AND OPEN COMPETITION Request for Proposal (RFP). Estimated Cost Range is between $25,000,000 and $100,000,000 Period of Performance for Design and Construction: Less than 720 Days. This Procurement will be conducted under FSC CODE: Y129, SIC CODE: 1541, NAICS Code: 236210. The size standard for this code is $33,500,000. All questions should be directed to the Contract Specialist, Connie Newell, at (916) 557-5229, FAX: No.: (916) 557-5278, e-mail connie.l.newell@usace.army.mil. Design-Build (D-B) of a new seven (7) dock, medium bay F-22 aircraft maintenance hanger, to be combined with an aircraft component production area and administrative support core (1,050 SM Administration, 1,083 SM Maintenance Shop, 1,807 SM Production Area, 5,840 SM Maintenance Docks totaling 9,780 SM for the new Primary Facility). Supporting systems extend to airfield pavements (93,642 SM Ramp/Taxiway) and Fuel/Defuel/Purge pad (1,110 SM). This complex will maintain/repair/modify F-22 fighter aircraft, to meet current and evolving maintenance demands. The facility will have a reinforced concrete foundation/footings/floor slab, structural steel frame, insulated panel walls, and insulated roof (standing seam metal?). Scope for the facility will likely include; open maintenance/repair bays (possibly with overhead support cranes), specialized work shops and admin space (offices, break/meeting/locker rooms, tool crib/equipment/material storage, composite fabrication areas, aerosystems component maintenance/replacement area and mech/elect rooms). Project/site work also extends to a new detached, steel reinforced concrete fuel/de-fuel & purge pad able to accommodate two full size F-22 aircraft, side by side. The project includes development of design deliverables for review (2 submittals for a Preliminary and Final, plus back check processes), sustainable design (in compliance with Executive Order 13423 and other applicable laws/Executive Orders), anti-terrorism/force protection (will be met by compliance with the RFP requirements), design deliverables for construction, grading, relocation/protection of utilities, utility service, site improvements, connections/runs, fire-protection/life safety systems, handicapped accessibility, EMCS, HVAC, plumbing, mechanical systems, interior utilities, interior/exterior finishes, exterior lighting, pavements, signage, and all necessary features (interior and exterior) to yield a safe, complete, and useable facility. Project need to be certifiable for Silver rating, compliant with sustainable design (LEEDs) considerations. The facility is in a secured PACER protected fence area, which reduces need for AT/FP, but will have other internal/external security considerations. However, design deliverables for construction, relocation/protection of utilities, connections/runs, HVAC, plumbing, interior utilities, interior/exterior finishes, and all necessary features (interior and exterior) as considered necessary to yield a safe, complete and useable facility are required. The Contractor shall develop and complete the design for a newly constructed facility, as indicated. Following award, the contract will proceed as follows: This project will follow completing design before construction begins process. All review comments for the work must be appropriately addressed and applicable construction techniques for unusual construction conditions must be properly defined and accepted and direction received from Contracting Officer prior to the start of construction. A SITE VISIT/PRE-PROPOSAL CONFERENCE IS TBA (On/Or About 7 Days After Issuance of Solicitation). All PROPOSALS will be due on/about 9 December 2008/3:00 pm PST. The specific date and time will be identified in the solicitation. OFFERORS ARE ADVISED THAT THIS PROJECT MAY BE DELAYED, CANCELED OR REVISED AT ANY TIME DURING THE SOLICITATION, SELECTION, EVALUATION, NEGOTIATION AND/OR FINAL AWARD PROCESS. ORDERING SOLICITATION: Plans and specifications will NOT be provided in hard paper copy or CD-ROM format. The solicitation and all amendments for this acquisition will be posted on a secure Government website known as FedBizOpps (www.fbo.gov) once the RFP is issued. Viewing/downloading documents from FedBizOpps will require prior registration in Central Contractor Registration (www.ccr.gov). If you are a first-time FedBizOpps user, you will also be required to register in FedBizOpps (www.fbo.gov) before accessing the RFP documents. To register, click on the Register Now button in the Vendors Block and follow the instructions. The following information will be required: Central Contractor Registration (CCR) Marketing Partner Identification Number (MPIN); DUNS Number or Cage Code; Telephone Number; and E-mail Address. Once registered with FedBizOpps, interested parties will then be able to log in and access the RFP documents. Important Note: Solicitation documents can be accessed ONLY via FedBizOpps. Please note that ALL contractors who want to register with FedBizOpps must be CCR registered, and have a MPIN, DUNS number or Cage code. For further information, please click on the FedBizOpps homepage link and the Vendor User Guide. The only PLAN-HOLDERS/BIDDERS LIST now available is via FedBizOpps. When viewing the Synopsis/Pre-solicitation Notice, you will click on the ADD ME TO INTERESTED VENDORS to enter your information. This function does not, however, allow you to identify yourself as a Prime or Sub. It is recommended that you identify your category in parentheses at either the beginning or end of your company name. For example: (Prime/Sub) XYZ Construction, or XYZ Construction (Prime/Sub). IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO CHECK FEDBIZOPPS FREQUENTLY FOR ANY AMENDMENTS OR CHANGES TO THE SOLICITATION.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=08d5d604a942e11297f07d7708aacd82&tab=core&_cview=1)
- Place of Performance
- Address: US Air Force F-22 Heavy Maintenance Hill AFB UT<br />
- Zip Code: 84056<br />
- Zip Code: 84056<br />
- Record
- SN01693784-W 20081022/081020214640-08d5d604a942e11297f07d7708aacd82 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |