SOLICITATION NOTICE
15 -- SUPPORT, STRUCTURAL
- Notice Date
- 11/4/2008
- Notice Type
- Presolicitation
- NAICS
- 336411
— Aircraft Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Hill AFB OO-ALC, DEPARTMENT OF THE AIR FORCE; 448 SCMG/PKAB;6050 GUM LANE BLDG1215; HILL AIR FORCE BASE; UT; 84056
- ZIP Code
- 84056
- Solicitation Number
- FA8251-09-R-80286
- Response Due
- 12/19/2008
- Archive Date
- 3/19/2009
- Point of Contact
- Daniel E Olsen, Phone 801-777-6789, Fax 801-777-0389, />
- E-Mail Address
-
an.olsen@hill.af.mil<br
- Small Business Set-Aside
- Total Small Business
- Description
- Item: 0001NSN: 1560015222407FJFJ SUPPORT, STRUCTURALP/N: 160D611632-6, P/N: 14-41605, P/N: 14-41605-1, P/N: 14&41605&1, Description: FLAP TRACK ASSEMBLY |57.000 INCHES NOMINAL| FLAP TRACKASSEMBLY |ASSY CONSIST OF 2 CLIPS 160D345441-31;1 BRACKET 160D631004-81;24 NUTS MS21042-3; 24 WASHERS AN960PD10L; 22 PIN HI-LOK HL19PB-6-2; 2PIN HI-LOK HL20PB-6-2; AS REQ RIVET MS20470AD4; 1 PLATE, NUT MS21069L5;AS REQ RIVET MS20426AD4; 4 RIVETS NAS1097D3;4 RIVETS AF085M6-18;DIM ARESTOCK MATL|ALUMINUM ALLOYTotal Line Item Qty: 0.0000 Applicable to: A-10 Item: 0001AA Description: FIRST ARTICLE TEST REPORT IAW DD 1423-1, EXHIBIT A,ATTACHED HERETO.Supp. Description: FATR TO BE SUBMITTED CONCURRENTLY WITH THE "FIRSTARTICLE" ITEM, DELIVERY IAW DD FORM 1423.Total Line Item Qty: 1.0000 LO Destn: FB2029,HILL AIR FORCE BASE,UT.,84056-5713. Delivery - ARO Days: 180, 1.00 LO Item: 0001AB Description: FIRST ARTICLE (FA), BID A, FA REQUIRED. Total Line Item Qty: 1.0000 EA Destn: FB2029,HILL AIR FORCE BASE,UT.,84056-5713. Delivery - ARO Days: 180, 1.00 EA Item: 0001AC Description: PRODUCTION ARTICLES, BID A, FA REQUIRED.Total Line Item Qty: 147.0000 EA Destn: SW3215,BARSTOW,CA.,92311-5014. Delivery - ARO Days: 000, 147.00 EA Item: 0001AD Description: PRODUCTION ARTICLES, FA NOT REQUIRED.Total Line Item Qty: 148.0000 EA Destn: SW3215,BARSTOW,CA.,92311-5014. Delivery: 30OCT2009, 148.00 EA Plus 0000 additional items Electronic procedure will be used for this solicitation. To: CAPY MACHINE SHOP INC, MELVILLE, NY.,11747-3502. To: METALCRAFTTECHNOLOGIES INC, CEDAR CITY, UT.,84720-8340. To: DESIGN/OL, INC., PORTJEFFERSON STATION, NY.,11776-1100. To: NORTHROP GRUMMAN SYSTEMSCORPORATION, BETHPAGE, NY.,11714-5000. To: TENS MACHINE COMPANY, INC.,HOLBROOK, NY.,11741-2606. To: KENT ASSOCIATES, INC., MANSFIELD,TX.,76063-2703. TO: NORTHWEST MACHINING, MERIDIAN, ID., 83642-5917, CPI AEROSTRUCTURES,EDGEWOOD, NY., 11717-8322. First article test required. Award will be made only if the offeror, the product/service, or themanufacturer meets qualification requirements at the time of award inaccordance with FAR clause 52.209-1. The solicitation identifies theoffice where additional information can be obtained concerningqualification requirements are cited in each individual solicitation. To include all required reports and data. This part required engineering source approval by the design controlactivity in order to maintain the quality of the part. Existing uniquedesign capability, engineering skills, and manufacturing knowledge bythe qualified source(s) require acquisition of the part from theapproved source(s). The approved source(s) retain data rights,manufacturing knowledge, or technical data that are not economicallyavailable to the Government, and the data or knowledge is essential tomaintaining the quality of the part. An alternate source must qualifyin accordance with the design control activity's procedures, as approvedby the cognizant Government engineering activity. The qualificationprocedures must be approved by the Government engineering activityhaving jurisdiction over the part in the intended application. See Note(s) 1, 23, 25 and 26. This part required engineering source approval by the design controlactivity in order to maintain the quality of the part. Existing uniquedesign capability, engineering skills, and manufacturing knowledge bythe qualified source(s) require acquisition of the part from theapproved source(s). The approved source(s) retain data rights,manufacturing knowledge, or technical data that are not economicallyavailable to the Government, and the data or knowledge is essential tomaintaining the quality of the part. An alternate source must qualifyin accordance with the design control activity's procedures, as approvedby the cognizant Government engineering activity. The qualificationprocedures must be approved by the Government engineering activityhaving jurisdiction over the part in the intended application. Award will be made only if the offeror, the product/service, or themanufacturer meets qualification requirements at the time of award inaccordance with FAR clause 52.209-1. The solicitation identifies theoffice where additional information can be obtained concerningqualification requirements are cited in each individual solicitation. 23. Award will be made only if the offeror, the product/service or themanufacturer meets qualification requirement at time of award, inaccordance with FAR clause 52.209-1 or 59.209-2. The solicitationidentifies the office where additional information can be obtainedconcerning qualification requirements and is cited in each individualsolicitation. 25. Information submitted should be pertinent and specific in thetechnical area under consideration, on each of the followingqualifications: (1) Experience: An outline of previous projects,specific work previoulsy performed or being performed and any in-houseresearch and development effort; (2) Personnel: Name, professionalqualifications and specific experience of scientist, engineers andtechnical personnel who may be assigned as a principal investigatorand/or project officer; (3) Facilities: Avalability and description ofspecial facilities required to perform in the technical areas underconsideration. A statement regarding industry security clearance. Anyother specific and pertinent information as pertains to this particulararea of procurement that would enhance our consideration and evaluationof the information submitted. 26. Based upon market research, the Government is not using policiescontained in Part 12, Acquisition of Commercial Items, in itssolicitation for the described supplies or services. However, interestedparties may identify to the contracting officer their interest andcapability to satisfy the Government's requirement with a commercialitem within 15 days of this notice.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=3d2e707ffb6fa42b6e7c44ce261c450a&tab=core&_cview=1)
- Record
- SN01700313-W 20081106/081104214654-3d2e707ffb6fa42b6e7c44ce261c450a (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |