SOLICITATION NOTICE
54 -- Tactical Training Scenario Fabricated Structure
- Notice Date
- 11/26/2008
- Notice Type
- Presolicitation
- NAICS
- 541420
— Industrial Design Services
- Contracting Office
- Department of the Army, Army Contracting Agency, South Region, ACA, Fort Bragg, ACA, Fort Bragg, Directorate of Contracting, ATTN: SFCA-SR-BR, Building 1-1333, Armistead & Macomb Streets, Fort Bragg, NC 28310-5000
- ZIP Code
- 28310-5000
- Solicitation Number
- W91247-09-T-0051
- Response Due
- 12/1/2008
- Archive Date
- 1/30/2009
- Point of Contact
- Jennifer E. Nesbitt, 910 907-4750<br />
- Small Business Set-Aside
- N/A
- Description
- The Mission Installation Contacting Command, Fort Bragg intends to award on a sole source basis in accordance with 10 USC 2304 (c)(1) and IAR 6.303-1, a contract to Military Wraps for a Tactical Training Scenario Fabricated Structure. The structure shall be 1415 sq ft. total of Graphic Design Military Wraps Material or equivalent material shall be printed to color choice and site specific design for Med. Sim Folks. Material designed specifically consist in of a S. 1 mil soft white gloss, highly conformable, polymeric air egress PVC Film that is coated on one side with a permanent, Opaque, Acrylic Pressure sensitive Adhesive with air egress technology and supplied with an 80# Polycoated release liner, ppiw (n/25mm 3.2 (13.5), Atmospheric Temp Ranges bottom -65. Over laminated with a military tactical design. Tactical Flat laminated finish to withstand paintball shots and consist of material that is manufactured with intellectual property ingredients to handle the Military's use and abuse. The material is manufactured for the following: To withstand temperatures from 65 degrees to 247 degrees. Ability to stick to Raw Block, Painted Block, Concrete, Stucco, Wood, Metal, Aluminum, Titanium, & compressed Recycled Rubber. To be decon friendly. Manufactured for Open Flame direct heat exposure to the surface of the material up to 220 degrees. This is so you have the ability to flash Decon at 140 degrees. To be Simulation & Paintball friendly. Manufactured for rapid repair panels if damaged by the operator. Manufactured to be weatherproof & UV proof. Contractor shall manufacture and perform installation of above materials. This is not a Request for Competitive Proposals. No contract will be awarded on the basis of offers received in response to this notice. Determination by the Government not to compete this proposed contract based on this notice is solely within the discretion of the Government. If you feel your firm possesses the ability to provide these supplies, then you must respond by demonstrating your firms technical capability to meet the requirements. If no affirmative written response is received, the supplies will be awarded without further notice. Detailed capabilities must be submitted to the email address provided below no later than 1 Dec 2008, 12:00 pm EST. Point of contact for this notice is Jennifer Nesbitt, PH: (910) 643-7225 or email: jennifer.nesbitt@us.army.mil.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=d861153f8d7063c96f3d782a12e3ab4b&tab=core&_cview=1)
- Place of Performance
- Address: MICC, Fort Bragg Directorate of Contracting, ATTN: SFCA-SR-BR, Building 1-1333, Armistead & Macomb Streets Fort Bragg NC<br />
- Zip Code: 28310-5000<br />
- Zip Code: 28310-5000<br />
- Record
- SN01711189-W 20081128/081126220250-d861153f8d7063c96f3d782a12e3ab4b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |