SOLICITATION NOTICE
71 -- TABLES FOR CHIEFS MESS DECKS
- Notice Date
- 11/26/2008
- Notice Type
- Modification/Amendment
- Contracting Office
- Department of the Navy, Naval Sea Systems Command, SUPSHIP Newport News, BLDG 2, Newport News, VA 23607
- ZIP Code
- 23607
- Solicitation Number
- N62793-08-M-ACPO-MESS
- Response Due
- 9/1/2008
- Archive Date
- 2/28/2009
- Point of Contact
- Name: Alan Ganoza, Title: SK2, Phone: 7576886510, Fax: 7576889577
- E-Mail Address
-
ganozaae@supship.navy.mil;
- Small Business Set-Aside
- Total Small Business
- Description
- CANCELLATION NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is N62793-08-M-ACPO-MESS and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-24. The associated North American Industrial Classification System (NAICS) code for this procurement is 334518 with a small business size standard of 500 employees. This requirement is a [ Small Business ] set-aside and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2008-09-01 11:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Suffolk, VA 23435 The USN NAVSEA SUPSHIP Newport News requires the following items, Exact Match Only, to the following: LI 001, Round dining tablesMeasuring approximately 52" in diameter x 30"H with an 1-1/2" perimeter edge. Top will be fabricated primarily from.090 aluminum with heavy duty support channels, enamelbased paint, CRES self edge and covered with high pressurelaminate. Base will be cast iron pedestal with 2" diametercolumn, 21" iron spider base with self adjusting anti-wobbleglides, powdercoated with wrinkle black., 14, EA; LI 002, HODS tableContractor proposes to provide (1) each oval shaped HODStable measuring approximately 220"L x 34"W at ends and54"W at center. Table will be fabricated primarily from.090aluminum with heavy duty support channels, 1-1/2"perimeter edge with 18 gauge stainless steel edge protector,enamel based paint and covered with high pressure plasticlaminate. Tops will be bolted together with 3/8" diameterbolts and secured to new pedestals welded to deck., 1, EA; LI 003, Round dining tablesMeasuring approximately 42" in diameter and (9) each roundtable meausring approximately 64" in diameter x 30"H. Tabletops will be fabricated primarily from.090 aluminum withheavy duty support channels, enamel based paint, stainlesssteel self edge protector. Base will be cast iron pedestal with2" diameter column, 21" iron spider base with self adjustinganti-wobble glides, powdercoated with wrinkle black., 7, EA; LI 004, CAG tableContractor proposes to provide (1) each rectangular tablemeasuring approximately 240"L x 42"W x 30"H. Table willbe fabricated in (4) independent sections measuringapproximately 60"L x 42"W fabricated primarily from.090aluminum with heavy duty support channels, 1-1/2" perimeteredge with 18 gauge stainless steel edge protector, enamelbased paint and covered with high pressure plastic laminate.Base will be cast iron pedestal with 2" diameter column, 21"iron spider base with self adjusting anti-wobble glides,powdercoated with wrinkle black per section., 1, EA; LI 005, Dining tablesMeasuring approximately 52" in diameter x 30"H with an 1-1/2" perimeter edge. Top will be fabricated primarily from.090 aluminum with heavy duty support channels, enamelbased paint, CRES self edge and covered with high pressureplastic laminate. Base will be cast iron pedestal with 2"diameter column, 21" iron spider base with self adjustinganti-wobble glides, powdercoated with wrinkle black., 20, EA; LI 006, Conference tableContractor proposes to provide (1) each oval shapedconference table measuring approximately 168"L x 34"W atends and 54"W at center. Table will be fabricated primarilyfrom.090 aluminum with heavy duty support channels, 1-1/2" perimeter edge with 18 gauge stainless steel self edgeprotector, enamel based paint and covered with high pressureplastic laminate. Tops will be bolted together with 3/8"diameter bolts and secured to new pedestals welded to deck., 1, EA; LI 007, Conference tableContractor proposes to provide (1) each oval shapedconference table measuring approximately 216"L x 34"W atends and 54"W at center. Table will be fabricated primarilyfrom.090 aluminum with heavy duty support channels, 1-1/2"perimeter edge with 18 gauge stainless steel self edgeprotector, enamel based paint and covered with high pressureplastic laminate. Tops will be bolted together with 3/8"diameter bolts and secured to new pedestals welded to deck., 1, EA; For this solicitation, USN NAVSEA SUPSHIP Newport News intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. USN NAVSEA SUPSHIP Newport News is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Buyers and Sellers understand that FedBid ranks all bids by price; however, pursuant to applicable acquisition regulations and/or departmental guidelines, Buyers may use criteria other than price to evaluate offers. Accordingly, please note that, unless otherwise specified herein below, to the extent required by applicable regulations and/or guidelines, award will be made to the responsible Seller whose offer conforming to the solicitation will be most advantageous to the Buyer on the basis of price, technical capability, delivery, and past performance. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) directly to ganozaae@supship.navy.mil (NOT THROUGH FEDBID.COM) so that they are received at that email address no later than the closing date and time for this solicitation. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. Delivery shall be made within 30 DAYS or less after receipt of order (ARO). CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov. New equipment only, no refurbished or used equipment. Two year warranty. FOB DESTINATION
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=86b0cb41578cc380f535c15e88e67cbc&tab=core&_cview=1)
- Place of Performance
- Address: Suffolk, VA 23435<br />
- Zip Code: 23435-5000<br />
- Zip Code: 23435-5000<br />
- Record
- SN01711317-W 20081128/081126220517-86b0cb41578cc380f535c15e88e67cbc (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |