Loren Data's SAM Daily™

FBO DAILY ISSUE OF JANUARY 29, 2009 FBO #2621
DOCUMENT

J -- DRYDOCK FOR USCGC DALLAS & USCGC GALLATIN - USCGC GALLATIN - USCGC DALLAS - Amendment 2

Notice Date

1/27/2009
 

Notice Type

Amendment 2
 

NAICS

336611 — Ship Building and Repairing
 

Contracting Office

Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102
 

ZIP Code

23510-9102
 

Solicitation Number

HSCG80-09-R-3FAA44
 

Archive Date

1/29/2010
 

Point of Contact

Lori L. Ellis, Phone: 757 628 4646, Michael E Monahan,, Phone: 757-628-4639
 

E-Mail Address

Lori.L.Ellis@uscg.mil, michael.e.monahan@uscg.mil
 

Small Business Set-Aside

N/A
 

Description

AMENDMENT A00002-Revision for Specification on CGC Dallas and CGC Gallatin. Revision on Supplies/Services and Prices/Costs for both vessels. See Attachments. A00001-see continuation sheet The United States Coast Guard Maintenance & Logistics Command, Atlantic intends to issue a Commercial Request for Proposal (RFP) for Dry Dock and repairs to the to USCGC DALLAS (WHEC-716) AND USCGC GALLATIN (WHEC-721) 378 FOOT HIGH ENDURANCE CUTTERS. The acquisition is for DRYDOCK repairs to the USCGC DALLAS (WHEC-716) and USCGC GALLATIN (WHEC-721) 378 FOOT HIGH ENDURANCE CUTTERS. The NAICS Code is 336611. The project for the two 378’ High Endurance Cutters (Dallas & Gallatin) will be issued as one solicitation and the Coast Guard may award one or two contracts as a result of the solicitation. The estimated procurement value is more than $10,000,000.00. Contractors will be allowed to submit proposal for one vessel or both vessels. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 15, Contracting by Negotiation. The Request for Proposal (RFP)will be issued as a Full and Open Competition on or about January 09, 2009. The solicitation will be issued electronically via the Federal Business Opportunity web page at http://www.fedbizopps.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for the RFQ release and all subsequent amendments. Hard copies of the specification and solicitation will not be issued. The geographic restriction is 600 nautical miles of the vessels homeport of Charleston, SC. The performance period will be One Hundred & Ninety-Three (193) Calendar Days with a start date of 09 February 2009 or as close to that date as possible. A. The scope of the acquisition for the USCGC DALLAS (WHEC-716), 378 FOOT HIGH ENDURANCE CUTTER is for the overhauling, cleaning and repairing of various items aboard. This work will include, but is not limited to: 1.Renew Foundation Support Structures for the Hot and potable Water Tanks and Evaporator 2.Perform Ultrasonic Thickness Measurements in Various Locations (200 Shots/set) 3.Perform Ultrasonic Thickness Measurements-Side Scan method 4.Inspect Pilothouse Deck 5.Renew Bulkhead Metal in Passageway 2-48-0-L 6.perform Leak test of Underwater Appendages 7.Remove, Inspect, and Reinstall Shaft Fairwaters and Rope Guards 8.Clean and Inspect Oil and Oily Waste Tanks. 9.Clean and Inspect Fuel Service, Aviation Service, Stowage, and overflow Tanks. 10.Clean and Inspect Accessible Voids 11.Clean and Inspect Grey Water Collection and Holding Tanks. 12.Clean and Inspect Sewage Collection and Holding Tanks. 13.Renew Plating Around Various Degaussing Cable Bulkhead Watertight Penetrations 14.Preserve, Inspect and Renew Deck Plating 15.Inspect and Renew "Star Deck" Plating 16.Renew Superstructure Expansion Joint 17.Renew Structural Closures 18.Renew Sea Chest Vent Piping and Weather Deck Drain Pipe 19.Remove, Inspect and Reinstall Propulsion Shafts. 20.Renew Shaft Covering 21.Overhaul Stern Tube Seal Assembly 22.Renew Shaft Bearings 23.Renew Propeller Shaft Sleeve(s) 24.Service Both Onboard Controllable Pitch Propeller Systems 25.Remove, Inspect and Reinstall Controllable Pitch Propeller Hubs. 26.Renew Topside Cable Hangers and Studs 27.Renew Dept Indicating Transducers 28.Overhaul Lube Oil Filter Transfer Valves 29.Renew Scullery Steam piping 30.Overhaul Vaneaxial Fan and Motor Assemblies 31.Renew Electric Heaters and Cooling Coil 32.Repair and Renew Ventilation Ductwork 33.Renew Supply Air Vent Piping 34.Preserve Locker Decks 35.Preserve Various Deck and Bulkhead Surfaces 36.Renew Piping Insulation 37.Renew Bulkhead and Ducting Insulation in Various Locations 38.Overhaul and Renew Valves 39.Overhaul Duplex Sea Strainers. 40.Renew Various Stuffing tubes 41.Remove TMR-4050 Coupler Mount, Railings, and Kick Pipes and Restore Deck 42.Remove, Inspect and Reinstall Rudder Assembly 43.Renew Rudder Sleeve and Bearings 44.Overhaul Bow-Prop 45.Renew Foundations 46.Renew Sewage Vacuum piping 47.Preserve Various Bilge Surfaces 48.Preserve Engine Room and Sewage Bilge Surfaces 49.Preserve Bilge Surfaces Under Permanent Ballast 50.Clean and Disinfect Potable Water Tanks 51.Preserve Antennas and Antenna Foundations 52.Preserve underwater Body-100% 53.Renew Tank Vents and Sounding Tubes 54.Renew Baseboards 55.Protect MK75/76MM Gun Mount Assembly and MK53 Combined Antenna System (CAS) Assembly 56.Preserve Freeboard-100% 57.Routine Drydocking 58.Provide Temporary Logistics 59.Preserve Grey Water Collection and Holding Tanks-Partial 60.Preserve Grey Water Collection and Holding Tanks-100% 61.Preserve Sewage Collection and Holding Tanks-Partial 62.Preserve Sewage Collection and Holding Tanks-100% 63.Preserve Oil and Oily Water Tanks-Partial 64.Preserve Oil and Oily Water Tanks-100% 65.Preserve Fuel Tanks-Partial 66.Preserve Fuel Tanks-100% 67.Preserve and Disinfect Potable Water Tanks-Partial 68.Perform Hull and Structural Plating Repairs-Crack (Steel) 69.Perform Hull and Structural Plating Repairs-Crack (Aluminum) 70.Perform Hull and Structural Steel Shaped Plating Repairs (5.1-Pound) 71.Perform Hull and Structural Steel Plating Repairs (5- Pound) 72.Perform Hull and Structural Steel Plate Repairs (7.6- Pound) 73.Perform Hull and Structural Steel Shaped Plating Repairs (7.6-Pound) 74.Perform Hull and Structural Steel Plating Repairs (10.2- Pound) 75.Perform Hull and Structural Steel Plate Repairs (10.2- Pound) 76.Perform Hull and Structural Steel Plating Repairs (12.75- Pound) 77.Perform Hull and Structural Steel Shaped Plating Repairs (12.75-Pound) 78.Perform Hull and Structural Steel Plate Repairs (15.3- Pound) 79.Perform Hull and Structural Steel Shaped Plating Repairs (15.3-Pound) 80.Perform Hull and Structural Steel Plate Repairs (20.5- Pound) 81.Perform Hull and Structural Steel Shaped Plate Repairs (20.5-Pound) 82.Perform Aluminum Hull and Structural Repairs-5/16" Plate 83.Perform Aluminum Hull and Structural Repairs-1/2" Plate 84.Perform Aluminum Hull and Structural Repairs-1/4" Plate 85.Perform Aluminum Hull and Structural Repairs-3/16" Plate 86.Perform Hull and Structural Plating Repairs-Overlay Welding (Steel) 87.Perform Hull and Structural Plating Repairs-Eroded Welds (Steel) 88.Perform Hull and Structural Plating Repairs-Overlay Welding (Aluminum) 89.Perform Hull and Structural Plating Repairs-Eroded Welds (Aluminum) 90.Strain Gage Alignment Inspections 91.Renew Cathodic Protection System 92.Provide Support for Performance of Sea Trails 93. Composite Labor Rate 94. Laydays B. The scope of the acquisition for the USCGC GALLATIN (WHEC-721), 378 FOOT HIGH ENDURANCE CUTTER is for the overhauling, cleaning and repairing of various items aboard. This work will include, but is not limited to: 1.Perform Ultrasonic Thickness Measurements in Various Locations 2.Perform Ultrasonic Thickness Measurements-Side Scan Method 3.Perform Leak test of Underwater Appendages 4.Protect MK75/76MM Gun Mount Assembly and MK53 Combined Antenna System ((CAS) Assembly 5.Clean and Inspect Chain Lockers 6.Clean and Inspect Sewage Collection and Holding Tanks 7.Clean Sewage Vacuum System Piping 8.Preserve and Disinfect Forepeak Tanks-Partial 9.Clean and Inspect Oil and Oily Waste Tanks 10.Clean and Inspect Fuel Services, Stowage, and Overflow Tanks 11.Inspect Accessible Voids 12.Remove, Inspect, and Reinstall Propeller Shafts 13.Remove, Inspect, and Reinstall Line Shaft Bearings 14.Remove, Inspect, and Reinstall Shaft Fairwaters and Rope Guards 15.Renew Stern Tubes 16.Overhaul Stern Tubes Seals Assembly 17.Renew Shaft Bearings 18.Service Both Onboard Controllable Pitch Propeller Systems 19.Remove, Inspect and Reinstall Controllable Pitch Propeller Hubs 20.Remove, Inspect and Reinstall Rudder Assembly 21.Renew Shaft Covering 22.Renew Transducers and Transducer Ring 23.Overhaul Vaneaxial Fan and Motor Assemblies 24.Overhaul and Renew Valves 25.Overhaul Sea Strainers 26.Overhaul Magazine Sprinkler Systems 27.Renew Pre-Heater Steam Valves, Piping, and Coils 28.Install Steam unit Heaters 29.Perform Anchor, Anchor Chain, and Ground Tackle Maintenance 30.Preserve Anchor and Anchor Chain 31.Renew pilot house Deck Covering System 32.Preserve Underwater Body-100% 33.preserve Freeboard – 100% 34.Preserve Superstructure 35.Preserve Main Deck Superstructure 36.Preserve Stack Tops 37.Preserve Decks 38.Preserve Bilge Surfaces 39.Preserve Bow Propulsion and Stores Bilge Surfaces 40.Preserve Chain Lockers-100% 41.Preserve Sewage Collection and holding Tanks-Partial 42.Preserve Sewage Collection and holding Tanks-100% 43.Preserve Oil and Oily Water Tanks-Partial 44.Preserve Oil and Oily Water Tanks-100% 45.Preserve Fuel Tanks-Partial 46.Preserve Fuel Tanks-100% 47.Clean and Inspect Shipboard Ventilation Systems 48.Renew 35' Whip Antennas and Foundations 49.Routine DryDocking 50.Renew Cathodic Protection System 51.Overhaul Bow-Prop 52.Renew Superstructure Expansion Joint 53.Renew Flight Deck Structural Supports 54.Renew Flight Deck Safety Net and Ladder Brackets 55.Renew Helo Tie-Down Fittings 56.Renew Various Structural Plating 57.Renew Various Deck Plating 58.Repair and Renew Wasted and Damaged Structural Elements 59.Renew CIWS Stuffing Tubes 60.Weld Handrail on Forward Mast Platform 61.Renew Stuffing Tubes on Gun Deck 62.Repair and Renew Ventilation Ductwork 63.Renew Various System Piping 64.Renew Fuel Vent Piping 65.Renew Structural Closures 66.Modify QAWTD 67.Renew Plating Around Degaussing Cable Watertight Penetrations 68.Refurbish Galley 69.Renew Pilot House Window Framing 70.Renew Gaskets on 01 Deck Windows 71.Remove and Install Bulkhead and Overhead Insulation in Various Locations 72.Renew Piping Insulation 73.Renew Engine Room Piping Insulation 74.Perform Hull and Structural Plating Repairs-Crack (Steel) 75.Perform Hull and Structural Plating Repairs-Crack (Aluminum) 76.Perform Hull and Structural Steel Shaped Plating Repairs (5.1-Pound) 77.Perform Hull and Structural Steel Plating Repairs (5-pound) 78.Perform Hull and Structural Steel Plate Repairs (7.6 Pound) 79.Perform Hull and Structural Steel Shaped Plate Repairs (7.6-Pound) 80.Perform Hull and Structural Plating Repairs (10.2-Pound) 81.Perform Hull and Structural Shaped Plate Repairs (10.2-Pound) 82.Perform Hull and Structural Steel Plating Repairs (12.75-Pound) 83.Perform Hull and Structural Shaped Plate Repairs (12.75-Pound) 84.Perform Hull and Structural Steel plate Repairs (15.3-Pound) 85.Perform Hull and Structural Shaped Plate Repairs (15.3-Pound) 86.Perform Hull and Structural Steel Plate Repairs (20.5-Pound) 87.Perform Hull and Structural Steel Shaped Plate repairs (20.5-Pound) 88.Perform Aluminum Hull and Structural Repairs-5/16" Plate 89.Perform Aluminum Hull and Structural Repairs-1/2" Plate 90.Perform Aluminum Hull and Structural Repairs-1/4" Plate 91.Perform Aluminum Hull and Structural Repairs-3/16" Plate 92.Perform Hull and Structural Plating Repairs-Overlay Welding (Steel) 93.Perform Hull and Structural Plating Repairs-Eroded Welds (Steel) 94.Perform Hull and Structural Plating Repairs-Overlay Welding (Aluminum) 95.Perform Hull and Structural Plating Repairs-Eroded Weld (Aluminum) 96.Provide Temporary Logistics 97.Provide Support For Performance of Sea Trails 98.Composite Labor Rate 99. Laydays All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests to Lori.L.Ellis@uscg.mil. The CD-ROM sets are available of all cutters and will be free of charge to contractors upon request. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For further information or questions regarding this solicitation, please contact Lori Ellis at (757) 628-4646, or by email at Lori.L.Ellis@uscg.mil. Proposals are due on or about 29 January 2009, 1100am Eastern Standard Time to: Commander (vpl-2) MLCLANT, 300 East Main Street, Suite 600, Norfolk, VA 23510-9102. Request for Proposals and additional information request may be faxed to (757) 628-4676 ATTN: Lori Ellis.
 

Web Link

FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=0d445771b501784c0b6604fef6525b11&tab=core&_cview=1)
 

Document(s)

Amendment 2
 

File Name: Specification Rev-2 dated January 27, 2009 (721_DD_BRC_09R2.pdf)

Link: https://www.fbo.gov//utils/view?id=d9d9ff1a85531369f598da46c1aad67f

Bytes: 699.05 Kb
 

File Name: Supplies/Services and Prices/Costs for USCGC Gallatin dated 1/27/09 Rev-4 (721_DD_BRC_09ER4_BLANK.xls)

Link: https://www.fbo.gov//utils/view?id=7fca9425a6feacb1c68a052d63286b4b

Bytes: 36.50 Kb
 

File Name: Specification Rev-2 dated January 27, 2009 (716_DD_MWS_09R2.pdf)

Link: https://www.fbo.gov//utils/view?id=1eb8d7b2ad08942e918e33f980df5b52

Bytes: 666.85 Kb
 

File Name: Supplies/Services and Prices/Costs for USCGC Dallas dated 1/27/09 Rev-3 (716_DD_MWS_09ER3_BLANK.xls)

Link: https://www.fbo.gov//utils/view?id=e74fc00dd9d69fcb2273015cf9557fa5

Bytes: 32.50 Kb
 

File Name: AMENDMENT A00002 (Amendment 02 Dallas-Gallatin.pdf)

Link: https://www.fbo.gov//utils/view?id=731c5b41e9790ac6785e3e396f4dd8b7

Bytes: 158.66 Kb
 

Note: If links are broken, refer to Point of Contact above or contact the FBO Help Desk at 877-472-3779.
 

Record

SN01738732-W 20090129/090127215708-0d445771b501784c0b6604fef6525b11 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |