SOURCES SOUGHT
13 -- 30MM PGU-13 HEI REMANUFACTURE EFFORT
- Notice Date
- 1/12/2009
- Notice Type
- Sources Sought
- NAICS
- 332993
— Ammunition (except Small Arms) Manufacturing
- Contracting Office
- Department of the Army, U. S. Army Materiel Command, U.S. Army Sustainment Command, US Army Sustainment Command, ATTN: AMSAS-AC, Rock Island, IL 61299-6500
- ZIP Code
- 61299-6500
- Solicitation Number
- W52P1J-09-R-0056
- Response Due
- 1/27/2009
- Archive Date
- 3/28/2009
- Point of Contact
- Julie Schmoll, (309)782-8588<br />
- Small Business Set-Aside
- N/A
- Description
- The purpose of this Sources Sought/Market Research is to identify potential sources capable of performing a remanufacturing effort on 30MM PGU-13 High Explosive Incendiary (HEI) cartridges. The Government will provide PGU-13 HEI single band projectiles as Government Furnished Material (GFM) to procure new all up cartridges under NSN: 1305-01-539-0416. A respondents production capacity must be sufficient to perform this remanufacture effort on a quantity of approximately 800,000 cartridges at a rate of 200,000 cartridges per month. The technical data package (TDP) is classified Distribution D (Authorized to the Department of Defense and DoD contractors only). WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act, (Title 22, U.S.C., SEC 2751 ET SEQ.) or the Export Administration Act of 1979, (Title 50, U.S.C., APP 2401, ET SEQ) as amended. Violation of these export laws is subject to severe criminal penalties. Disseminate IAW provision of DOD Directive 5230.25. Offerors must be registered with the U.S./Canada Joint Certification Office to obtain a copy of the specification and top drawings (See www.dlis.dla.mil/jcp/ for instructions and information). Cartridge components include an aluminum cartridge case, HEI projectile (provided as GFM), M36A2 percussion primer, flashtube, and propellant. Cartridge performance requirements include Function and Casualty, Muzzle Velocity, Chamber Pressure, Action Time, Accuracy, Environmental Conditions, and Waterproofness. A respondent to this market survey must have the facilities and skills required to produce and qualify the 30MM PGU-13 HEI cartridge. Specific production capabilities and skills required to manufacture the 30MM PGU-13 HEI Cartridge are as follows: prime case machine to insert the flashtube assembly and percussion primer into the cartridge case; propellant loader to weigh propellant and charge the cartridge case; cartridge assembly loader to insert the projectile body into the cartridge case, crimp, and gage cartridge chamber and height; pack-out equipment to assemble cartridges into tubes and load into containers; and ballistic test facilities and equipment for measuring velocity, pressure, action time, time of flight, etc. Besides Load, Assemble, and Pack (LAP) equipment, additional production capabilities required are furnaces for heat treat and annealing, metal forming and machining equipment, anodize and phosphate systems, material handling systems, tool room equipment, ultrasonic test equipment, and metrology and metallurgy laboratories. Specific skills required to produce the PGU-13 HEI Cartridge include: ammunition process/design engineers, set-up mechanics familiar with ammunition component and LAP production equipment; toolmakers and machinists to support all production facilities/equipment; personnel for programming and operation of LAP manufacturing equipment; certified inspectors, quality control engineers, and ballistics test personnel for in-process and final inspection, pack-out, First Article Test (FAT) and Lot Acceptance Test (LAT) ballistics testing, and shipment of ammunition products; machine operators for set-up and operation of various metal forming and machine tool production manufacturing equipment; personnel with expertise to control heat treat, quench, temper of metal products to obtain ductility and hardness requirements; personnel familiar with phosphate and anodizing systems; ultrasonic technicians; metallurgists to test raw materials throughout the process to a finished product; personnel with extensive expertise in the manufacture and handling of propellant; and skills needed to maintain several items of unique or special type pieces of the equipment and facilities. Interested U.S./Canadian firms who feel they are capable of performing this remanufacturing of the 30MM PGU-13 HEI Cartridges are invited to indicate their interest by providing the Government a brief summary of their companys capabilities, including a brief description of facilities, personnel and past manufacturing experience as it relates to the above criteria. Information must be submitted to Ms. Julie Schmoll at the Rock Island Contracting Center via email address: julie.a.schmoll@us.army.mil. Please respond NO LATER THAN January 27, 2009, and identify 30MM PGU-13 HEI Cartridge Remanufacture Effort Sources Sought/Market Research as the subject of your response. This is a market survey for planning purposes only and shall not be construed as a Request for Proposal or as an obligation on the part of the Government. The Government does not intend to award a contract based on this market survey or otherwise pay for information solicited. The information you provide will only be utilized by the Rock Island Contracting Center in developing its acquisition approach for future requirements.
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=707c9a7387263ba744c4701aa65bfd40&tab=core&_cview=1)
- Place of Performance
- Address: US Army Sustainment Command ATTN: AMSAS-AC, Rock Island IL<br />
- Zip Code: 61299-6500<br />
- Zip Code: 61299-6500<br />
- Record
- SN01730799-W 20090114/090112215301-707c9a7387263ba744c4701aa65bfd40 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |