PRESOL | J | LGCB FIRE TRAINER MAINTENANCE - Pre-Proposal Site Visit Reservation Form - Technical Order

FBO DAILY ISSUE OF MARCH 05, 2009 FBO #2656
SOLICITATION NOTICE

J -- LGCB FIRE TRAINER MAINTENANCE - Pre-Proposal Site Visit Reservation Form - Technical Order

Notice Date: 3/3/2009
Notice Type: Combined Synopsis/Solicitation
NAICS: 811310 — Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
Contracting Office: Department of the Air Force, United States Air Force Europe, 39th Contracting Sqd - Incirlik, Incirlik AB, Unit 7090 Box 127, Incirlik AB, Turkey, 09824-0280
ZIP Code: 09824-0280
Solicitation Number: FA5685-09-T-0004
Point of Contact: Frank D. Boyce, Phone: 903223162289, Brandy J Allen,, Phone: 00903223168075
E-Mail Address: Frank.Boyce@incirlik.af.mil, brandy.allen@incirlik.af.mil
Small Business Set-Aside: N/A
Description: Combined Synopsis/Solicitation LGCB Fire Trainer Technical Order: TO 35E1-2-13-1 Change 3 7 Aug 07 07 Pre-Proposal Site Visit Reservation Form ATTENTION POTENTIAL OFFERORS: DUE TO ESTABLISHED ECONOMIC AGREEMENTS BETWEEN THE UNITED STATES GOVERNMENT AND THE GOVERNMENT OF TURKEY, THE AIR FORCE INTENDS TO AWARD THIS SOLICITATION TO A BUSINESS CONCERN WITHIN THE COUNTRY OF TURKEY. THEREFORE, IF THERE ARE PROPOSALS FROM BUSINESS CONCERNS OUTSIDE OF TURKEY THEY WILL ONLY BE CONSIDERED IF NO PROPOSALS ARE RECEIVED FROM INSIDE TURKEY (OR ARE DEEMED UNREASONABLE). (i) This is combined synopsis/solicitation number FA5685-09-T-0004 issued on 03 March, 2009 for commercial items prepared in accordance with the format in the Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. (ii) Solicitation FA5685-09-T-0004 is issued as a Request for Quote. (iii) This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 97-14 and Defense Acquisition Circular 91-13. NAICS Code 811310 (Commercial and Industrial machinery repair and maintencance services) applies to this procurement (For a full list please view attached Solicitation Document). (iv) This acquisition is Unrestricted from Small-Business Set-Asides due to the Overseas Location Exception. (v) This is a combined synopsis and solicitation for the following commercial items: ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0001 3 DAYS Annual Maintenance/Inspection of AFTF FFP equipment. Provide all labor, equipment, materials, tools, parts and transportation to and from job site to complete requirement in accordance with statement of need. FOB: Destination NSN: J012-71-90A-0020 MILSTRIP: F2G3C28353AQ01 PURCHASE REQUEST NUMBER: F2G3C28353AQ01 SIGNAL CODE: A NET AMT ACRN AA CIN: F2G3C27190A0020001 ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0002 1 Lump Sum Materials and Parts Unpriced purchase of material and parts. Prior to ordering any parts you must receive approval from the Contracting Officer. All material & parts utilized in the servicing of this equipment shall include manufacture name, part numbers, serial numbers, and cost. All work shall conform to the attached statement of need and final pricing will be definitized upon completion of the service. FOB: Destination NSN: J012-71-90A-0020 MILSTRIP: F2G3C28353AQ01 PURCHASE REQUEST NUMBER: F2G3C28353AQ01 SIGNAL CODE: A NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 1001 3 DAYS Annual Maintenance/Inspection of AFTF FFP equipment. Provide all labor, equipment, materials, tools, parts and transportation to and from job site to complete requirement in accordance with statement of need. FOB: Destination NSN: J012-71-90A-0020 MILSTRIP: F2G3C28353AQ01 PURCHASE REQUEST NUMBER: F2G3C28353AQ01 SIGNAL CODE: A NET AMT ACRN AA CIN: F2G3C27190A0020001 ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 0002 1 Lump Sum Materials and Parts Unpriced purchase of material and parts. Prior to ordering any parts you must receive approval from the Contracting Officer. All material & parts utilized in the servicing of this equipment shall include manufacture name, part numbers, serial numbers, and cost. All work shall conform to the attached statement of need and final pricing will be definitized upon completion of the service. FOB: Destination NSN: J012-71-90A-0020 MILSTRIP: F2G3C28353AQ01 PURCHASE REQUEST NUMBER: F2G3C28353AQ01 SIGNAL CODE: A NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 1002 1 Lump Sum Materials and Parts Unpriced purchase of material and parts. Prior to ordering any parts you must receive approval from the Contracting Officer. All material & parts utilized in the servicing of this equipment shall include manufacture name, part numbers, serial numbers, and cost. All work shall conform to the attached statement of need and final pricing will be definitized upon completion of the service. FOB: Destination NSN: J012-71-90A-0020 MILSTRIP: F2G3C28353AQ01 PURCHASE REQUEST NUMBER: F2G3C28353AQ01 SIGNAL CODE: A NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 2001 3 DAYS Annual Maintenance/Inspection of AFTF FFP equipment. Provide all labor, equipment, materials, tools, parts and transportation to and from job site to complete requirement in accordance with statement of need. FOB: Destination NSN: J012-71-90A-0020 MILSTRIP: F2G3C28353AQ01 PURCHASE REQUEST NUMBER: F2G3C28353AQ01 SIGNAL CODE: A NET AMT ACRN AA CIN: F2G3C27190A0020001 ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 2002 1 Lump Sum Materials and Parts Unpriced purchase of material and parts. Prior to ordering any parts you must receive approval from the Contracting Officer. All material & parts utilized in the servicing of this equipment shall include manufacture name, part numbers, serial numbers, and cost. All work shall conform to the attached statement of need and final pricing will be definitized upon completion of the service. FOB: Destination NSN: J012-71-90A-0020 MILSTRIP: F2G3C28353AQ01 PURCHASE REQUEST NUMBER: F2G3C28353AQ01 SIGNAL CODE: A NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 3001 3 DAYS Annual Maintenance/Inspection of AFTF FFP equipment. Provide all labor, equipment, materials, tools, parts and transportation to and from job site to complete requirement in accordance with statement of need. FOB: Destination NSN: J012-71-90A-0020 MILSTRIP: F2G3C28353AQ01 PURCHASE REQUEST NUMBER: F2G3C28353AQ01 SIGNAL CODE: A NET AMT ACRN AA CIN: F2G3C27190A0020001 ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 3002 1 Lump Sum Materials and Parts Unpriced purchase of material and parts. Prior to ordering any parts you must receive approval from the Contracting Officer. All material & parts utilized in the servicing of this equipment shall include manufacture name, part numbers, serial numbers, and cost. All work shall conform to the attached statement of need and final pricing will be definitized upon completion of the service. FOB: Destination NSN: J012-71-90A-0020 MILSTRIP: F2G3C28353AQ01 PURCHASE REQUEST NUMBER: F2G3C28353AQ01 SIGNAL CODE: A NET AMT ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 4001 3 DAYS Annual Maintenance/Inspection of AFTF FFP equipment. Provide all labor, equipment, materials, tools, parts and transportation to and from job site to complete requirement in accordance with statement of need. FOB: Destination NSN: J012-71-90A-0020 MILSTRIP: F2G3C28353AQ01 PURCHASE REQUEST NUMBER: F2G3C28353AQ01 SIGNAL CODE: A NET AMT ACRN AA CIN: F2G3C27190A0020001 ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT 4002 1 Lump Sum Materials and Parts Unpriced purchase of material and parts. Prior to ordering any parts you must receive approval from the Contracting Officer. All material & parts utilized in the servicing of this equipment shall include manufacture name, part numbers, serial numbers, and cost. All work shall conform to the attached statement of need and final pricing will be definitized upon completion of the service. FOB: Destination.NSN: J012-71-90A-0020 MILSTRIP: F2G3C28353AQ01 PURCHASE REQUEST NUMBER: F2G3C28353AQ01SIGNAL CODE: A NET AMT ADDITIONAL INFO: SITE VISIT FOR INTERESTED PARTIES WILL TAKE PLACE DURING THE WEEK OF 23-27 MARCH 2009. IT IS VERY IMPORTANT THAT IF YOU WISH TO TAKE PART IN THE SITE VISIT THAT YOU SEND THE SITE VISIT RESERVATION FORM IN BY NLT 10 MARCH 2009. THERE WILL ONLY BE ONE SITE VISIT FOR THIS REQUIREMENT SO PLEASE COORDINATED WITH 2LT. FRANK BOYCE, 676-8075 (FRANK.BOYCE@INCIRLIK.AF.MIL). ALL DOCUMENTATION MUST BE TRANSLATED AND CERTIFIED IN ENGLISH IF THE ORIGINAL DOCUMENTS ARE IN ANY LANGUAGE OTHER THAN ENGLISH AND WILL BE KEPT AS AN ATTACHMENT IN THE FOLDER. THESE DOCUMENTS WILL NOT BE RETURNED BACK TO THE ORIGINATORS. Please ensure that your firm is registered with CCR and all information is current. If you are not registered or you information is not current you need to go to https://www.bpn.gov/CCR/scripts/index.html and fill out a web base application that take 30 to 40 minute to complete. You must have a DUNS number in order to start this process. If you don't have a Duns number you can obtain one at http://fedgov.dnb.com/. It takes two to three business days in order to receive a DUNS number and then two to three business day to receive a CAGE code. Please begin the process as soon as you receive this notice in order to speed up the contracting process in the event that you are the winning offeror. In addition, a mandatory system called Wide Area Work Flow (WAWF) is now online. This system will speed up your payment processing time and allow you to monitor your payment status online. There are no charges or fees to use WAWF. To help familiarize yourself with this new system, a web based training site located at http://wawftraining.com is here to help you out. In order to get registered, see attachment for further instruction on how to get registered. Maintenance will occur at the Fire Training Facility located behind building 548, Civil Engineering Squadron, Incirlik A.B., Turkey (viii) (xiv) The Defense Priorities and Allocation Systems (DPAS) assigned rating for this procurement is unrated. (xv) There are no numbered notes applicable. (xvi) Signed and dated offers, to include a complete listing of all items, must be submitted to 39th Contracting Squadron, Building 485/LGCB, Attn: Frank D. Boyce., 39 TAAHHUT BOLUGU, BINA #485, 10cu TANKER US KOMUTANLIGI, ADANA no later than 1600 hrs, 03 April, 2009. Responsible sources may submit a proposal, or quote which shall be considered. Offers may be submitted via mail, facsimile, or e-mail. (xvii) POC: Frank D. Boyce at 0-322-316-8075, fax: 0-322-332-1090, or e-mail: frank.boyce@incirlik.af.mil. STATEMENT OF NEED Aircraft Fire Training Facility Maintenance Service 1. DESCRIPTION OF SERVICES: The contractor shall furnish all plant, parts, labor, tools, supplies, equipment, materials and management necessary to provide maintenance and repair service to the INCIRLIK AFB Aircraft Fire Training Facility (AFTF). 2 GENERAL: All service tasks identified in Technical Order, TO 35E1-2-13-1(Hard and Soft Copy will each be available) will be completed during these service visits. All functional items will be operational prior to the departure of service technicians. Service includes ignitors, water jackets, burner/burner grates, propane control valves, ignitor switches, control stand, water pumps/valves and drains. 2.1 AFTF Cleaning and Maintenance Service: 2.1.1. Service, check operation and functionality, Record and tabulate results and report on the condition and operability status of the AFTF to the Fire Ground Maintenance Staff. Per Technical Order. 2.1.2. This contract consists of 1 service and repair visit (per year) by a qualified technician. This contract also includes 4 option years. Each visit is comprised of a minimum of three 8-hour days on site and is based on full access to the site and all support equipment. All technicians must provide documentation supporting their qualifications for electrical and plumbing work. 2.1.3. Unlimited telephone support during regular business hours will be available to the on-site technicians for troubleshooting through the Fire Ground Maintenance Staff. 2.1.4. Access to the "As-Built drawing files" shall be granted to the on-site technicians. 2.1.5. Upon completion of all inspections, at all intervals, the contractor shall provide a written statement of all findings, required repairs and a detailed listing of replacement parts to the contracting office. Listing of parts is to include manufacture name, part numbers, serial numbers, and cost. The Contractor shall not proceed with any repairs not covered under this contract without the authorization of the Contracting Officer. The contractor will be reimbursed at invoice cost for parts required to replace defective items that are beyond economical repair. Freight costs for these items shall be listed and billed separately. The contractor shall request approval from the Contracting Office prior to purchase or procurement and installation of parts subject to reimbursement. The contractor shall submit appropriate invoices showing the actual cost to validate the request for reimbursement; list freight costs separately. Installation costs associated with reimbursable items shall be included in the basic contract and all acceptable option periods. 2.1.5. The Contractor shall submit a material listing and Material Safety Data Sheets (MSDS) for all chemicals scheduled for use in the performance of this contract. This information shall be submitted prior to contract start date to the Hazardous Material Pharmacy, Contractor shall maintain a complete file of all approved MSDS. ADDENDUM ONE Addendum One 52.212-1, Instruction to Offerors - Commercial Items (Jan 2006) Add this information to the end of the clause ATTENTION POTENTIAL OFFERORS: IMPORTANT INFORMATION CONCERNING ELIGIBILITY FOR AWARD OF THIS SOLICITATION. 1. DUE TO ESTABLISHED ECONOMIC AGREEMENTS BETWEEN THE UNITED STATES GOVERNMENT AND THE GOVERNMENT OF TURKEY, THE AIR FORCE INTENDS TO GIVE FIRST CONSIDERATION TO AWARD THIS SOLICITATION TO A BUSINESS CONCERN WITHIN THE COUNTRY OF TURKEY, FOLLOWED BY EUROPEAN BASED COMPANIES, AND FINALLY UNITED STATES COMPANIES. IF THERE ARE NO TURKISH OR EUROPEAN BUSINESSES THAT CAN MEET THE SPECIFICATIONS REQUIRED, THE AIR FORCE RESERVES THE RIGHT TO AWARD THE CONTRACT TO A UNITED STATES FIRM. 2. THIS SOLICITATION CAN BE ELECTRONICALLY ACCESSED AT THIS SITE. IT IS HIGHLY ENCOURAGED THAT YOU DOWNLOAD THE SOLICITATION DUE TO HARD COPY BEING UNAVAILABLE. 3. INTERESTED VENDORS MUST PROVIDE DETAILED INFORMATION INCLUDING THE FOLLOWING DOCUMENTATION STATING YOUR COMPANY'S ABILITY TO PROVIDE THE REQUIRED SUPPLIES TO THE FOLLOWING INDIVIDUAL: Address for Vendors and Postal: 2Lt FRANK BOYCE 39 TAAHHUT BOLUGU BINA # 485 10cu TANKER US KOMUTANLIGI, ADANA PHONE: 0-322-316-8075 (three lines) e-mail: frank.boyce@incirlik.af.mil ADDITIONAL REQUIRED DOCUMENTATION FOR TURKISH VENDORS ONLY - TURK FIRMALARI ICIN GEREKLI BELGELER: a- TAX PAYERS LICENSE - VERGI KAYDI SURETI b- TRADE CHAMBER REGISTRATION - TICARET ODASI KAYIT SURETI c- SIGNATURE CIRCULAR - IMZA SIRKULERI d- COMPANY REGISTRATION IF APPLICABLE - VAR ISE SIRKET SOZLESME SURETI e- CERTIFIED/AUTHORIZED RETAIL/RESELLER DOCUMENTATION FROM MANUFACTURER AND OR IMPORTER FOR REQUESTED SUPPLIES - TALEP EDILEN MALLARIN ÜRETICISI VEYA YETKILI ITHALATCISINDAN TEMIN EDILECEK YETKILI/ONAYLI PAREKENDE/SATICILIK BELGELERI. f- PHOTOCOPIES OF WRITTEN WARRANTY DOCUMENTS, IF APPLICABLE - GARANTI GEREKIYOR ISE GARANTI EVRAKLARI SURETLERI. g- A COMPLETED COPY OF 52.212-3, OFFEROR REPRESENTATIONS AND CERTIFICATIONS. KONTRAT SARTNAME Madde 52.212-3, TEKLIF SAHIBINE AIT TEMSIL VE BELGELENDIRME BILGILERI BOLUMUNU TAMAMLAYIP, IMZA VE KASELIYEREK TEKLIFINIZ EKINDE TESLIM EDINIZ h- TECHNICAL QUALIFICATIONS DOCUMENTS- THE OFFEROR MUST PROVIDE DOCUMENTS, TRAINING QUALIFICATIONS, OR PROFESSIONAL CERTIFICATION FOR WORK ON ELECTRICAL OR PLUMBING RELATED REPAIRS/SERVICES. i- TECHNICAL CAPABILITIES DOCUMENTS- THE OFFEROR SHALL PROVIDE ANY DOCUMENTS DISPLAYING THE CAPABILITIES OF THE OFFERED PRODUCTS. THESE DOCUMENTS MUST CERTIFY THAT THE PRODUCTS MEET OR EXCEED THE CAPABILITIES OF THE PRODUCTS DESCRIBED IN THIS SOLICITATION. THE ABOVE DOCUMENTATION MUST BE TRANSLATED AND CERTIFIED IN ENGLISH AND WILL BE KEPT AS AN ATTACHMENT IN THE FOLDER. THESE DOCUMENTS WILL NOT BE RETURNED BACK TO THE ORIGINATORS. 4. PLEASE PROVIDE THE BELOW INFORMATION/DOCUMENTATION: A. YOUR COMPANY MUST BE CENTRAL CONTRACTOR REGISTRATION (CCR) REGISTERED IN ORDER TO SUBMIT AN OFFER OR A BID TO THE 39th CONS. 1. YOU NEED TO HAVE DUNS AND NGACE CODE TO BE REGISTERED ON CCR. 2. THE WEBSITE FOR CCR REGISTRATION: http://www.ccr.gov/ B. NATO CAGE CODE: ________________________________ 1. If you do not have a Nato Cage Code, you must contact: http://www.msb.mil.tr/prgs/tekhizweb/TEKMURACAT/NCAGE/default.asp or MLLI SAVUNMA BAKANLIGI TEK.HIZ.D. BSK.LIGI (TURK MILLI KODLANDIRMA BUROSU) 06100 Bakanliklar, ANKARA 2. Telephone NGACE ASSIGNMENT: 0312-4106184 C. YOUR COMPANY'S "DUNS" NUMBER:________________________________ 1. If you do not have a DUNS number, you must contact "Dun and Bradstreet", at the numbers below to have one assigned, before your quotation will be considered: U.S.A. OFFICE: ISTANBUL OFFICE: Phone: 001 610-882-7741 Phone: 0-212-327-2238 ext 122 FAX: 001 610-882-7140 FAX: 0-212-327-2243 WEBSITE: http://www.finar.com.tr 5. FAILURE TO PROVIDE THE REQUIRED DOCUMENTS AND THE SOLICITATION PROPERLY FILLED, SIGNED, AND STAMPED MAY CAUSE YOUR OFFERS TO BE CONSIDERED, AND DETERMINED NON RESPONSIVE. 6. INFORMATION TO FOREIGN VENDORS NOTE 1: Authorization to Foreign Vendors The contract warrants that it has been duly authorized to operate and do business in the country or countries in which this contract is to be performed, and that it has obtained, at no cost to the United States Government, all necessary licenses and permits required in connections with this contract, and that it will fully comply with all laws, decrees, labor standards and regulations of this country or countries during the performance of this contract. NOTE 2: Law Governing Contracts In any dispute arising out of this contract, the decision of which requires consideration of questions of law, the rights and obligations of the parties shall be interpreted in accordance with the substantive laws of the United States of America. NOTE 3: Invoices All invoice amounts shall be reflected in US Dollars or payment may be delayed. VAT-EXEMPT PURCHASE I certify that this purchase (delivery of goods or service) is made for the purpose of common defense and in accordance with the Tax Relief Agreement between Turkey and The United States of America, which was ratified by Law Number 6426 of June 1954. This purchase is exempt from Value Added Tax according to the Council of Ministers of the Republic of Turkey decision number 92/2958 or 22 April 1992, published in the Official Gazette dated 21 May 1992, number 21234. KDV'DEN MUAF SATINALMA Isbu satinalmanin (mal teslimi veya hizmet); Turkiye ile Amerika Birlesid Devletleri arasinda imzalanmis bulunan ve 30 Haziran 1954 tarihli ve 6426 sayili kanunla onaylanmis Vergi Muafiyetleri Anlasmasina uygun olarak ve ortak savunma amaciyla yapildigini onaylariz. Isbu satinalma: 21 May 1992 tarih ve 21234 sayili Resmi Gazetede yayinlanmis olan 22 Nisan 1992 tarih ve 1992/2958 sayili Bakanlar Kurulu Kararina gore katma deger vergisinden mustesnadir. NOTE TO TURKISH VENDORS: It is recommended contractors attach their VAT exempt form when submitting their invoices to Defense Finance Accounting System (DFAS) in Wide Area WorkFlow (WWAF) and/or handcarry to 39 CONS for certification. For the Turkish Government to accept it, a duly appointed Contracting Officer must first certify the VAT exempt form. 7. HOST NATION LABOR LAWS, RELATIONS AND STANDARDS a. The contractor shall be responsible for complying with any and all Turkish labor laws, relations and standards in effect or which shall come into effect during the term of this contract. Such compliance shall pertain to: hours of work, wages, salaries, working conditions, labor relations (including collective bargaining, union agreements etc.), particular workmen's compensation, social security contributions for all categories of dependents and professionals. The Contractor and all subcontractors are required to adhere with all safety laws in effect and that may come into effect of the Turkish Government. The Contracting Officer reserves the right to suspend work until such time as adherence to the laws is assured and to remove from the work site any worker found to ignore safety practices. Such suspensions of work or removal of employees shall be at no cost to the Government. Failure by the contractor to correct deficiencies in a reasonable time shall be cause for Termination of Default. b. Furthermore, the contractor shall safeguard his firm with additional insurance for potential liabilities to Turkish authorities and workers for accidents, injuries or deaths which are imputable to the contractor for failure to observe required safety practices and/or any requirement of paragraph a. above. c. The contractor shall be totally responsible and shall save harmless the U.S. Government from any and all disputes, claims, or grievance initiated by employees or third parties because of failure to comply with this special contract requirement. d. Construction contractors shall be responsible for written notification to the local labor benefits office of site work initiation under this contract and shall produce copy of such notice to the Contracting Officer if requested at any time during the completion of the work. e. With each base pass request the Contractor shall furnish the health insurance and labor benefits employee number to the Turkish Pass and ID. f. With signature of the offer the contractor warrants that the proposed price(s) include all costs in effect or which shall come into effect during the term of the contract for compliance with this special contract requirement and also for all responsibilities and risks indicated herein. 8. OPERATIONS SECURITY In the performance of contract terms and conditions, contractors performing work on Incirlik Air Base may witness or hear of activities which provide them insight into present or future military activities. Each contractor is responsible to ensure its employees and/or subcontractors understand this type of information shall not be discussed and/or spread to any other sources. Infractions on the part of any contractor (or its employees or subcontractor[s]) may result in: 1) Immediate removal of the employee/subcontractor[s] from base, 2) A less than satisfactory past performance record for the project, and/or 3) Debarment actions. INSPECTION AND ACCEPTANCE TERMS Supplies/services will be inspected/accepted at: CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY 0001 Destination Government Destination Government 0002 Destination Government Destination Government 1001 Destination Government Destination Government 1002 Destination Government Destination Government 2001 Destination Government Destination Government 2002 Destination Government Destination Government 3001 Destination Government Destination Government 3002 Destination Government Destination Government 4001 Destination Government Destination Government 4002 Destination Government Destination Government DELIVERY INFORMATION CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC 0001 POP 15-Apr-2009 TO 14-Apr-2010 3 F2G3C2 39 CES/CECEP BASE CIVIL ENG 39CES/CECEP BLDG 444 UNIT 7065 APO AE 09824 676-6596 FOB: Destination F2G3C2 0002 POP 15-Apr-2009 TO 14-Apr-2010 1 (SAME AS PREVIOUS LOCATION) FOB: Destination F2G3C2 1001 POP 15-Apr-2010 TO 14-Apr-2011 3 (SAME AS PREVIOUS LOCATION) FOB: Destination F2G3C2 1002 POP 15-Apr-2010 TO 14-Apr-2011 1 (SAME AS PREVIOUS LOCATION) FOB: Destination F2G3C2 2001 POP 15-Apr-2011 TO 14-Apr-2012 3 (SAME AS PREVIOUS LOCATION) FOB: Destination F2G3C2 2002 POP 15-Apr-2011 TO 14-Apr-2012 1 (SAME AS PREVIOUS LOCATION) FOB: Destination F2G3C2 3001 POP 15-Apr-2012 TO 14-Apr-2013 3 (SAME AS PREVIOUS LOCATION) FOB: Destination F2G3C2 3002 POP 15-Apr-2012 TO 14-Apr-2013 1 (SAME AS PREVIOUS LOCATION) FOB: Destination F2G3C2 4001 POP 15-Apr-2013 TO 14-Apr-2014 3 (SAME AS PREVIOUS LOCATION) FOB: Destination F2G3C2 4002 POP 15-Apr-2013 TO 14-Apr-2014 1 (SAME AS PREVIOUS LOCATION) FOB: Destination F2G3C2 CLAUSES INCORPORATED BY REFERENCE 52.202-1 Definitions JUL 2004 52.203-3 Gratuities APR 1984 Gratuities JUL 1995 52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, or Proposed for Debarment SEP 2006 52.211-17 Delivery of Excess Quantities SEP 1989 52.212-1 Instructions to Offerors--Commercial Items JUN 2008 52.212-4 Contract Terms and Conditions--Commercial Items OCT 2008 52.225-13 Restrictions on Certain Foreign Purchases JUN 2008 52.232-1 Payments APR 1984 52.233-3 Protest After Award AUG 1996 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.237-2 Protection Of Government Buildings, Equipment, And Vegetation APR 1984 52.246-1 Contractor Inspection Requirements APR 1984 52.247-34 F.O.B. Destination NOV 1991 52.252-2 Clauses Incorporated By Reference FEB 1998 252.223-7006 Prohibition On Storage And Disposal Of Toxic And Hazardous Materials APR 1993 252.225-7042 Authorization to Perform APR 2003 252.229-7000 Invoices Exclusive of Taxes or Duties JUN 1997 252.232-7008 Assignment of Claims (Overseas) JUN 1997 252.233-7001 Choice of Law (Overseas) JUN 1997 CLAUSES INCORPORATED BY FULL TEXT 52.204-7 CENTRAL CONTRACTOR REGISTRATION (APR 2008) (a) Definitions. As used in this clause-- Central Contractor Registration (CCR) database means the primary Government repository for Contractor information required for the conduct of business with the Government. Data Universal Numbering System (DUNS) number means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities. Data Universal Numbering System +4 (DUNS+4) number means the DUNS number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional CCR records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at Subpart 32.11) for the same parent concern. Registered in the CCR database means that-- (1) The Contractor has entered all mandatory information, including the DUNS number or the DUNS+4 number, into the CCR database; and (2) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS), and has marked the record ``Active''. The Contractor will be required to provide consent for TIN validation to the Government as a part of the CCR registration process. (b)(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the CCR database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. (2) The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "DUNS" or "DUNS +4" followed by the DUNS or DUNS +4 number that identifies the offeror's name and address exactly as stated in the offer. The DUNS number will be used by the Contracting Officer to verify that the offeror is registered in the CCR database. (c) If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. (1) An offeror may obtain a DUNS number-- (i) Via the Internet at http://fedgov.dnb.com/webform or if the offeror does not have internet access, it may call Dun and Bradstreet at 1-866-705-5711 if located within the United States; or (ii) If located outside the United States, by contacting the local Dun and Bradstreet office. The offeror should indicate that it is an offeror for a U.S. Government contract when contacting the local Dun and Bradstreet office. (2) The offeror should be prepared to provide the following information: (i) Company legal business. (ii) Tradestyle, doing business, or other name by which your entity is commonly recognized. (iii) Company Physical Street Address, City, State, and Zip Code. (iv) Company Mailing Address, City, State and Zip Code (if separate from physical). (v) Company Telephone Number. (vi) Date the company was started. (vii) Number of employees at your location. (viii) Chief executive officer/key manager. (ix) Line of business (industry). (x) Company Headquarters name and address (reporting relationship within your entity). (d) If the Offeror does not become registered in the CCR database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. (e) Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation. (f) The Contractor is responsible for the accuracy and completeness of the data within the CCR database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the CCR database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the CCR database to ensure it is current, accurate and complete. Updating information in the CCR does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. (g)(1)(i) If a Contractor has legally changed its business name, "doing business as" name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in Subpart 42.12, the Contractor shall provide the responsible Contracting Officer a minimum of one business day's written notification of its intention to (A) change the name in the CCR database; (B) comply with the requirements of Subpart 42.12 of the FAR; and (C) agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor must provide with the notification sufficient documentation to support the legally changed name. (ii) If the Contractor fails to comply with the requirements of paragraph (g)(1)(i) of this clause, or fails to perform the agreement at paragraph (g)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the CCR information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the electronic funds transfer (EFT) clause of this contract. (2) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the CCR record to reflect an assignee for the purpose of assignment of claims (see FAR Subpart 32.8, Assignment of Claims). Assignees shall be separately registered in the CCR database. Information provided to the Contractor's CCR record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the "Suspension of payment" paragraph of the EFT clause of this contract. (h) Offerors and Contractors may obtain information on registration and annual confirmation requirements via the internet at http://www.ccr.gov or by calling 1-888-227-2423, or 269-961-5757. (End of clause) CLAUSES INCORPORATED BY FULL TEXT 52.212-2 EVALUATION - COMMERCIAL ITEMS JAN 1999 (IAW FAR 12.301(c) (a) This procurement is conducted under FAR 13.5, Test Program for Certain Commercial Items. The Government will award a Firm, Fixed Price commercial contract resulting from this solicitation to the lowest priced, technically acceptable, responsible offeror with acceptable past performance whose offer conforms to the solicitation. The Government intends to evaluate offers and award a contract without discussions with offerors. Offerors are required to submit a technical proposal and a price proposal according to the factors set forth under this provision. The following factors shall be used to evaluate offers: FACTOR 1 - TECHNICAL CAPABILITY FACTOR 2 - PRICE FACTOR 3 - PAST PERFORMANCE Technical Acceptability is significantly more important than Price and Past Peformance. FACTOR 1: TECHNICAL ACCEPTABILITY In order to be considered for award, the offeror's technical proposal must be rated as acceptable. To be determined technically acceptable, the offeror must provide all information and/or requirements listed in Factor 1. Failure to submit any of the listed requirements will result in the offeror's technical proposal being determined technically unacceptable. The standard is met when: A. The offeror provides written evidence of its registration and authorization to conduct business in the country of Turkey with the following required documentation. Required Documentation: a- TAX PAYERS LICENSE - VERGI KAYDI SURETI b- TRADE CHAMBER REGISTRATION - TICARET ODASI KAYIT SURETI c- SIGNATURE CIRCULAR - IMZA SIRKÜLERI d- COMPANY REGISTRATION IF APPLICABLE - VAR ISE SIRKET SÖZLESME SURETI e- CERTIFIED/AUTHORIZED RETAIL/RESELLER DOCUMENTATION FROM MANUFACTURER AND OR IMPORTER FOR REQUESTED SUPPLIES - TALEP EDILEN MALLARIN ÜRETICISI VEYA YETKILI ITHALATCISINDAN TEMIN EDILECEK YETKILI/ONAYLI PAREKENDE/SATICILIK BELGELERI. f- PHOTOCOPIES OF WRITTEN WARRANTY DOCUMENTS, IF APPLICABLE - GARANTI GEREKIYOR ISE GARANTI EVRAKLARI SURETLERI. g- TECHNICAL QUALIFICATIONS DOCUMENTS- THE OFFEROR MUST PROVIDE DOCUMENTS, TRAINING QUALIFICATIONS, OR PROFESSIONAL CERTIFICATION FOR WORK ON ELECTRICAL OR PLUMBING RELATED REPAIRS/SERVICES. h- TECHNICAL CAPABILITY DOCUMENTS (IF PROPOSING EQUAL PRODUCTS)-PROVIDE ANY DOCUMENTS DEMONSTRATING TECHNICAL CAPABILITIES OF PROPOSED PRODUCTS. The above documentation must be translated and certified in english and will be kept as an attachment in the folder. These documents will not be returned back to the originators. FACTOR 2: PRICE Only price proposals submitted by offerors whose technical proposals are determined to be technically acceptable will be considered for evaluation. Award will be made to the lowest price, technically acceptable, responsible offeror with acceptable past performance. The lowest price offer will be computed by adding the total price for the basic period. Proposed prices will be evaluated using the price analysis techniques prescribed in FAR 13.106-2 to determine price reasonableness. The standard is met when: The price is determined fair and reasonable in accordance with FAR 12.209. FACTOR 3: PAST PERFORMANCE Each offeror will be evaluated on their past performance based on existing and prior contracts using the attached Past Performance Questionaire as well as previous knowledge of contract performance. Also, offerors are encouraged to provide past performance on relevant maintenance contracts. The Government will evaluate the offeror's technical management capability, timeliness of performance, customer satisfaction, and any other applicable information. Offerors with no past performance information will be rated neutral. (End of clause) 52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (JUN 2008) An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (m) of this provision. (a) Definitions. As used in this provision -- "Emerging small business" means a small business concern whose size is no greater than 50 percent of the numerical size standard for the NAICS code designated. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. Manufactured end product means any end product in Federal Supply Classes (FSC) 1000-9999, except-- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person conducting the business can demonstrate-- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. Service-disabled veteran-owned small business concern-- (1) Means a small business concern-- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. Veteran-owned small business concern means a small business concern-- (1) Not less than 51 percent of which is owned by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern-- (1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; or (2) Whose management and daily business operations are controlled by one or more women. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the Online Representations and Certifications Application (ORCA) website. (2) The offeror has completed the annual representations and certifications electronically via the ORCA website at http://orca.bpn.gov. After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ----------. (Offeror to identify the applicable paragraphs at (c) through (m) of this provision that the offeror has completed for the purposes of this solicitation only, if any.) These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.] (c) Offerors must complete the following representations when the resulting contract will be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it ( ) is, ( ) is not a small business concern. (2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it ( ) is, ( ) is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. (Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.) The offeror represents as part of its offer that it ( ) is, ( ) is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, for general statistical purposes, that it ( ) is, ( ) is not a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ) is, ( ) is not a women-owned small business concern. Note: Complete paragraphs (c)(6) and (c)(7) only if this solicitation is expected to exceed the simplified acquisition threshold. (6) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ) is, a women-owned business concern. (7) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: _____________________________________________ (8) Small Business Size for the Small Business Competitiveness Demonstration Program and for the Targeted Industry Categories under the Small Business Competitiveness Demonstration Program. (Complete only if the offeror has represented itself to be a small business concern under the size standards for this solicitation.) (i) (Complete only for solicitations indicated in an addendum as being set-aside for emerging small businesses in one of the designated industry groups (DIGs).) The offeror represents as part of its offer that it ( ) is, ( ) is not an emerging small business. (ii) (Complete only for solicitations indicated in an addendum as being for one of the targeted industry categories (TICs) or designated industry groups (DIGs).) Offeror represents as follows: (A) Offeror's number of employees for the past 12 months (check the Employees column if size standard stated in the solicitation is expressed in terms of number of employees); or (B) Offeror's average annual gross revenue for the last 3 fiscal years (check the Average Annual Gross Number of Revenues column if size standard stated in the solicitation is expressed in terms of annual receipts). (Check one of the following): Average Annual Number of Employees Gross Revenues ___ 50 or fewer ___ $1 million or less ___ 51 - 100 ___ $1,000,001 - $2 million ___ 101 - 250 ___ $2,000,001 - $3.5 million ___ 251 - 500 ___ $3,500,001 - $5 million ___ 501 - 750 ___ $5,000,001 - $10 million ___ 751 - 1,000 ___ $10,000,001 - $17 million ___ Over 1,000 ___ Over $17 million (9) (Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns or FAR 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.) (i) General. The offeror represents that either-- (A) It ( ) is, ( ) is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the database maintained by the Small Business Administration (PRO-Net), and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or (B) It ( ) has, ( )( has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted. (ii) Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(9)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. (The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ____________.) (10) HUBZone small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents, as part of its offer, that-- (i) It ( ) is, ( ) is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material change in ownership and control, principal office, or HUBZone employee percentage has occurred since it was certified by the Small Business Administration in accordance with 13 CFR part 126; and (ii) It ( ) is, ( ) is not s joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for the HUBZone small business concern or concerns that are participating in the joint venture. (The offeror shall enter the name or names of the HUBZone small business concern or concerns that are participating in the joint venture:____________.) Each HUBZone small business concern participating in the joint venture shall submit a separate signed copy of the HUBZone representation. (d) Certifications and representations required to implement provisions of Executive Order 11246-- (1) Previous Contracts and Compliance. The offeror represents that-- (i) It ( ) has, ( ) has not, participated in a previous contract or subcontract subject either to the Equal Opportunity clause of this solicitation, the and (ii) It ( ) has, ( ) has not, filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that-- (i) It ( ) has developed and has on file, ( ) has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR Subparts 60-1 and 60-2), or (ii) It ( ) has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $100,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Act Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American Act --Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. The terms ``component,'' ``domestic end product,'' ``end product,'' ``foreign end product,'' and ``United States'' are defined in the clause of this solicitation entitled ``Buy American Act--Supplies.'' (2) Foreign End Products: Line Item No.:--------------------------------------------------------- Country of Origin:----------------------------------------------------- (List as necessary) (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g)(1) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American Act-Free Trade Agreements-Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms "Bahrainian or Moroccan end product," "component," "domestic end product," "end product," "foreign end product," "Free Trade Agreement country," "Free Trade Agreement country end product," "Israeli end product," and "United States" are defined in the clause of this solicitation entitled "Buy American Act--Free Trade Agreements--Israeli Trade Act." (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian or Moroccan end products) or Israeli end products as defined in the clause of this solicitation entitled ``Buy American Act--Free Trade Agreements--Israeli Trade Act'': Free Trade Agreement Country End Products (Other than Bahrainian or Moroccan End Products) or Israeli End Products: Line Item No. -------------------- -------------------- -------------------- [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) of this provision) as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act." The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products. Other Foreign End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate I (Jan 2004). If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Canadian End Products: Line Item No. _______________________________________ _______________________________________ _______________________________________ [List as necessary] (3) Buy American Act-Free Trade Agreements-Israeli Trade Act Certificate, Alternate II (Jan 2004). If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled "Buy American Act-Free Trade Agreements-Israeli Trade Act": Canadian or Israeli End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ [List as necessary] (4) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(4)(ii) of this provision, is a U.S.-made or designated country end product, as defined in the clause of this solicitation entitled "Trade Agreements." (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products: Line Item No. Country of Origin ______________ _________________ ______________ _________________ ______________ _________________ (List as necessary) (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American Act. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). The offeror certifies, to the best of its knowledge and belief, that -- (1) The offeror and/or any of its principals ( ) are, ( ) are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency, (2) ( ) Have, ( ) have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and (3) ( ) are, ( ) are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (4) ( ) Have, ( ) have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. Sec. 6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. Sec. 6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. Sec. 6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. 362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). (The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).) (1) Listed End Product Listed End Product • Listed Countries of Origin: • • • • • • (2) Certification. (If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.) ( )(i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. ( ) (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that is has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly-- (1) ( ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) ( ) Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Act. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) (The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.) ( ) (1) Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror ( ) does ( ) does not certify that-- (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. ( ) (2) Certain services as described in FAR 22.1003-4(d)(1). The offeror ( ) does ( ) does not certify that-- (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies-- (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Act wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer Identification Number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to a central contractor registration database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the Government to collect and report on any delinquent amounts arising out of the offeror's relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror's TIN. (3) Taxpayer Identification Number (TIN). ( ) TIN: --------------------. ( ) TIN has been applied for. ( ) TIN is not required because: ( ) Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; ( ) Offeror is an agency or instrumentality of a foreign government; ( ) Offeror is an agency or instrumentality of the Federal Government. (4) Type of organization. ( ) Sole proprietorship; ( ) Partnership; ( ) Corporate entity (not tax-exempt); ( ) Corporate entity (tax-exempt); ( ) Government entity (Federal, State, or local); ( ) Foreign government; ( ) International organization per 26 CFR 1.6049-4; ( ) Other ----------. (5) Common parent. ( ) Offeror is not owned or controlled by a common parent; ( ) Name and TIN of common parent: Name --------------------. TIN --------------------. (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that it does not conduct any restricted business operations in Sudan. (End of provision) 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (DEC 2008) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (2) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) ___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (SEP 2006), with Alternate I (OCT 1995) (41 U.S.C. 253g and 10 U.S.C. 2402). ___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (DEC 2008)(Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). ___ (3) 52.219-3, Notice of HUBZone Small Business Set-Aside (Jan 1999) (15 U.S.C. 657a). ___ (4) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (JUL 2005) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). ___ (5) [Removed]. ___ (6)(i) 52.219-6, Notice of Total Small Business Set-Aside (JUNE 2003) (15 U.S.C. 644). ___ (ii) Alternate I (OCT 1995) of 52.219-6. ___ (iii) Alternate II (MAR 2004) of 52.219-6. ___ (7)(i) 52.219-7, Notice of Partial Small Business Set-Aside (JUNE 2003) (15 U.S.C. 644). ___ (ii) Alternate I (OCT 1995) of 52.219-7. ___ (iii) Alternate II (MAR 2004) of 52.219-7. ___ (8) 52.219-8, Utilization of Small Business Concerns (MAY 2004) (15 U.S.C. 637 (d)(2) and (3)). ___ (9)(i) 52.219-9, Small Business Subcontracting Plan (APR 2008) (15 U.S.C. 637(d)(4)). ___ (ii) Alternate I (OCT 2001) of 52.219-9 ___ (iii) Alternate II (OCT 2001) of 52.219-9. ___ (10) 52.219-14, Limitations on Subcontracting (DEC 1996) (15 U.S.C. 637(a)(14)). __ (11) 52.219-16, Liquidated Damages--Subcontracting Plan (JAN 1999) (15 U.S.C. 637(d)(4)(F)(i)). ___ (12)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (OCT 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer). ___ (ii) Alternate I (JUNE 2003) of 52.219-23. ___ (13) 52.219-25, Small Disadvantaged Business Participation Program--Disadvantaged Status and Reporting (APR 2008) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). ___ (14) 52.219-26, Small Disadvantaged Business Participation Program--Incentive Subcontracting (OCT 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). ___ (15) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (MAY 2004) (U.S.C. 657 f). ___ (16) 52.219-28, Post Award Small Business Program Rerepresentation (JUNE 2007) (15 U.S.C. 632(a)(2)). ___ (17) 52.222-3, Convict Labor (JUNE 2003) (E.O. 11755). ___ (18) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (FEB 2008) (E.O. 13126). ___ (19) 52.222-21, Prohibition of Segregated Facilities (FEB 1999). ___ (20) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246). ___ (21) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of theVietnam Era, and Other Eligible Veterans (SEP 2006) (38 U.S.C. 4212). ___ (22) 52.222-36, Affirmative Action for Workers with Disabilities (JUN 1998) (29 U.S.C. 793). ___ (23) 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (SEP 2006) (38 U.S.C. 4212). ___ (24) 52.222-39, Notification of Employee Rights Concerning Payment of Union Dues or Fees (DEC 2004) (E.O. 13201). ___(25)(i) 52.222-50, Combating Trafficking in Persons (AUG 2007) (Applies to all contracts). ___ (ii) Alternate I (AUG 2007) of 52.222-50. ___ (26)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (MAY 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). ___ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(c)). ___ (27) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b). ___ (28)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (DEC 2007) (E.O. 13423). ___ (ii) Alternate I (DEC 2007) of 52.223-16. ___ (29) 52.225-1, Buy American Act--Supplies (JUNE 2003) (41 U.S.C. 10a-10d). ___ (30)(i) 52.225-3, Buy American Act--Free Trade Agreements--Israeli Trade Act (AUG 2007) (41 U.S.C. 10a-10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, Pub. L 108-77, 108-78, 108-286, 109-53 and 109-169). ___ (ii) Alternate I (JAN 2004) of 52.225-3. ___ (iii) Alternate II (JAN 2004) of 52.225-3. _x_ (31) 52.225-5, Trade Agreements (Nov 2007) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). ___ (32) 52.225-13, Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). ___ (33) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150). ___ (34) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). ___ (35) 52.232-29, Terms for Financing of Purchases of Commercial Items (FEB 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). ___ (36) 52.232-30, Installment Payments for Commercial Items (OCT 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). _x_ (37) 52.232-33, Payment by Electronic Funds Transfer--Central Contractor Registration (OCT 2003) (31 U.S.C. 3332). ___ (38) 52.232-34, Payment by Electronic Funds Transfer--Other than Central Contractor Registration (MAY 1999) (31 U.S.C. 3332). ___ (39) 52.232-36, Payment by Third Party (MAY 1999) (31 U.S.C. 3332). ___ (40) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a). ___ (41)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). ____ (ii) Alternate I (APR 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.) ____ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). ____ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). ____ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act--Price Adjustment (Multiple Year and Option Contracts) (NOV 2006) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). ____ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act--Price Adjustment (February 2002) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). ____ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). ____ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). ____ (7) 52.237-11, Accepting and Dispensing of $1 Coin (SEP 2008)(31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in paragraphs (e)(1)(i) through (xi) of this paragraph in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (DEC 2008) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note). (ii) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $550,000 ($1,000,000 for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246). (iv) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (SEP 2006) (38 U.S.C. 4212). (v) 52.222-36, Affirmative Action for Workers with Disabilities (June 1998) (29 U.S.C. 793). (vi) 52.222-39, Notification of Employee Rights Concerning Payment of Union Dues or Fees (DEC 2004) (E.O. 13201). (vii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (viii) 52.222-50, Combating Trafficking in Persons (AUG 2007) (22 U.S.C. 7104(g)). Flow down required in accordance with paragraph (f) of FAR clause 52.222-50. (ix) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (x) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services--Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor May include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause) 52.213-3 NOTICE TO SUPPLIER (APR 1984) This is a firm order ONLY if your price does not exceed the maximum line item or total price in the Schedule. Submit invoices to the Contracting Officer. If you cannot perform in exact accordance with this order, WITHHOLD PERFORMANCE and notify the Contracting Officer immediately, giving your quotation. (End of clause) 52.214-21 DESCRIPTIVE LITERATURE (APR 2002) (a) Descriptive literature, as used in this provision, means information furnished by a bidder, such as cuts, illustrations, drawings, and brochures, that shows a product's characteristics or construction or explains its operation. The term includes only that information required to evaluate the acceptability of the product and excludes other information for operating or maintaining the product. (b) Descriptive literature is required to establish, for the purpose of evaluation and award, details of the product offered that are specified elsewhere in the solicitation and pertain to significant elements such as-- (1) Design; (2) Materials; (3) Components; (4) Performance characteristics; and (5) Methods of manufacture, assembly, construction, or operation. (c) Descriptive literature, required elsewhere in this solicitation, shall be-- (1) Identified to show the item(s) of the offer to which it applies; and (2) Received by the time specified in this solicitation. (d) If the bidder fails to submit descriptive literature on time, the Government will reject the bid, except that late descriptive literature sent by mail may be considered under the Late Submissions, Modifications, and Withdrawals of Bids provision of this solicitation. (e) If the descriptive literature fails to show that the product offered conforms to the requirements of the solicitation, the Government will reject the bid. (End of provision) 52.214-34 SUBMISSION OF OFFERS IN THE ENGLISH LANGUAGE (APR 1991) Offers submitted in response to this solicitation shall be in the English language. Offers received in other than English shall be rejected. (End of provision) 52.214-35 SUBMISSION OF OFFERS IN U.S. CURRENCY (APR 1991) Offers submitted in response to this solicitation shall be in terms of U.S. dollars. Offers received in other than U.S. dollars shall be rejected. (End of provision) 52.229-6 TAXES--FOREIGN FIXED-PRICE CONTRACTS (JUN 2003) (a) To the extent that this contract provides for furnishing supplies or performing services outside the United States and its outlying areas, this clause applies in lieu of any Federal, State, and local taxes clause of the contract. (b) Definitions. As used in this clause-- "Contract date," means the date set for bid opening or, if this is a negotiated contract or a modification, the effective date of this contract or modification. Country concerned means any country, other than the United States and its outlying areas, in which expenditures under this contract are made. "Tax" and "taxes," include fees and charges for doing business that are levied by the government of the country concerned or by its political subdivisions. "All applicable taxes and duties," means all taxes and duties, in effect on the contract date, that the taxing authority is imposing and collecting on the transactions or property covered by this contract, pursuant to written ruling or regulation in effect on the contract date. "After-imposed tax," means any new or increased tax or duty, or tax that was exempted or excluded on the contract date but whose exemption was later revoked or reduced during the contract period, other than excepted tax, on the transactions or property covered by this contract that the Contractor is required to pay or bear as the result of legislative, judicial, or administrative action taking effect after the contract date. "After-relieved tax," means any amount of tax or duty, other than an excepted tax, that would otherwise have been payable on the transactions or property covered by this contract, but which the Contractor is not required to pay or bear, or for which the Contractor obtains a refund, as the result of legislative, judicial, or administrative action taking effect after the contract date. "Excepted tax," means social security or other employment taxes, net income and franchise taxes, excess profits taxes, capital stock taxes, transportation taxes, unemployment compensation taxes, and property taxes. "Excepted tax" does not include gross income taxes levied on or measured by sales or receipts from sales, property taxes assessed on completed supplies covered by this contract, or any tax assessed on the Contractor's possession of, interest in, or use of property, title to which is in the U.S. Government. (c) Unless otherwise provided in this contract, the contract price includes all applicable taxes and duties, except taxes and duties that the Government of the United States and the government of the country concerned have agreed shall not be applicable to expenditures in such country by or on behalf of the United States. (d) The contract price shall be increased by the amount of any after-imposed tax or of any tax or duty specifically excluded from the contract price by a provision of this contract that the Contractor is required to pay or bear, including any interest or penalty, if the Contractor states in writing that the contract price does not include any contingency for such tax and if liability for such tax, interest, or penalty was not incurred through the Contractor's fault, negligence, or failure to follow instructions of the Contracting Officer or to comply with the provisions of paragraph (i) below. (e) The contract price shall be decreased by the amount of any after-relieved tax, including any interest or penalty. The Government of the United States shall be entitled to interest received by the Contractor incident to a refund of taxes to the extent that such interest was earned after the Contractor was paid by the Government of the United States for such taxes. The Government of the United States shall be entitled to repayment of any penalty refunded to the Contractor to the extent that the penalty was paid by the Government. (f) The contract price shall be decreased by the amount of any tax or duty, other than an excepted tax, that was included in the contract and that the Contractor is required to pay or bear, or does not obtain a refund of, through the Contractor's fault, negligence, or failure to follow instructions of the Contracting Officer or to comply with the provisions of paragraph (i) below. (g) No adjustment shall be made in the contract price under this clause unless the amount of the adjustment exceeds $250. (h) If the Contractor obtains a reduction in tax liability under the United States Internal Revenue Code (Title 26, U.S. Code) because of the payment of any tax or duty that either was included in the contract price or was the basis of an increase in the contract price, the amount of the reduction shall be paid or credited to the Government of the United States as the Contracting Officer directs. (i) The Contractor shall take all reasonable action to obtain exemption from or refund of any taxes or duties, including interest or penalty, from which the United States Government, the Contractor, any subcontractor, or the transactions or property covered by this contract are exempt under the laws of the country concerned or its political subdivisions or which the governments of the United States and of the country concerned have agreed shall not be applicable to expenditures in such country by or on behalf of the United States. (j) The Contractor shall promptly notify the Contracting Officer of all matters relating to taxes or duties that reasonably may be expected to result in either an increase or decrease in the contract price and shall take appropriate action as the Contracting Officer directs. The contract price shall be equitably adjusted to cover the costs of action taken by the Contractor at the direction of the Contracting Officer, including any interest, penalty, and reasonable attorneys' fees. (End of clause) 52.232-33 PAYMENT BY ELECTRONIC FUNDS TRANSFER-CENTRAL CONTRACTOR REGISTRATION (OCT 2003) (a) Method of payment. (1) All payments by the Government under this contract shall be made by electronic funds transfer (EFT), except as provided in paragraph (a)(2) of this clause. As used in this clause, the term "EFT" refers to the funds transfer and may also include the payment information transfer. (2) In the event the Government is unable to release one or more payments by EFT, the Contractor agrees to either-- (i) Accept payment by check or some other mutually agreeable method of payment; or (ii) Request the Government to extend the payment due date until such time as the Government can make payment by EFT (but see paragraph (d) of this clause). (b) Contractor's EFT information. The Government shall make payment to the Contractor using the EFT information contained in the Central Contractor Registration (CCR) database. In the event that the EFT information changes, the Contractor shall be responsible for providing the updated information to the CCR database. (c) Mechanisms for EFT payment. The Government may make payment by EFT through either the Automated Clearing House (ACH) network, subject to the rules of the National Automated Clearing House Association, or the Fedwire Transfer System. The rules governing Federal payments through the ACH are contained in 31 CFR part 210. (d) Suspension of payment. If the Contractor's EFT information in the CCR database is incorrect, then the Government need not make payment to the Contractor under this contract until correct EFT information is entered into the CCR database; and any invoice or contract financing request shall be deemed not to be a proper invoice for the purpose of prompt payment under this contract. The prompt payment terms of the contract regarding notice of an improper invoice and delays in accrual of interest penalties apply. (e) Liability for uncompleted or erroneous transfers. (1) If an uncompleted or erroneous transfer occurs because the Government used the Contractor's EFT information incorrectly, the Government remains responsible for-- (i) Making a correct payment; (ii) Paying any prompt payment penalty due; and (iii) Recovering any erroneously directed funds. (2) If an uncompleted or erroneous transfer occurs because the Contractor's EFT information was incorrect, or was revised within 30 days of Government release of the EFT payment transaction instruction to the Federal Reserve System, and-- (i) If the funds are no longer under the control of the payment office, the Government is deemed to have made payment and the Contractor is responsible for recovery of any erroneously directed funds; or (ii) If the funds remain under the control of the payment office, the Government shall not make payment, and the provisions of paragraph (d) of this clause shall apply. (f) EFT and prompt payment. A payment shall be deemed to have been made in a timely manner in accordance with the prompt payment terms of this contract if, inthe EFT payment transaction instruction released to the Federal Reserve System, the date specified for settlement of the payment is on or before the prompt payment due date, provided the specified payment date is a valid date under the rules of the Federal Reserve System. (g) EFT and assignment of claims. If the Contractor assigns the proceeds of this contract as provided for in the assignment of claims terms of this contract, the Contractor shall require as a condition of any such assignment, that the assignee shall register separately in the CCR database and shall be paid by EFT in accordance with the terms of this clause. Notwithstanding any other requirement of this contract, payment to an ultimate recipient other than the Contractor, or a financial institution properly recognized under an assignment of claims pursuant to subpart 32.8, is not permitted. In all respects, the requirements of this clause shall apply to the assignee as if it were the Contractor. EFT information that shows the ultimate recipient of the transfer to be other than the Contractor, in the absence of a proper assignment of claims acceptable to the Government, is incorrect EFT information within the meaning of paragraph (d) of this clause. (h) Liability for change of EFT information by financial agent. The Government is not liable for errors resulting from changes to EFT information made by the Contractor's financial agent. (i) Payment information. The payment or disbursing office shall forward to the Contractor available payment information that is suitable for transmission as of the date of release of the EFT instruction to the Federal Reserve System. The Government may request the Contractor to designate a desired format and method(s) for delivery of payment information from a list of formats and methods the payment office is capable of executing. However, the Government does not guarantee that any particular format or method of delivery is available at any particular payment office and retains the latitude to use the format and delivery method most convenient to the Government. If the Government makes payment by check in accordance with paragraph (a) of this clause, the Government shall mail the payment information to the remittance address contained in the CCR database. (End of Clause) 52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): http://farsite.hill.af.mil (End of provision 52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (APR 1984) (a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause. (b) The use in this solicitation or contract of any Defense Fedarl Acquisition Regulation Supplement (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation. (End of clause) 252.204-7004 CENTRAL CONTRACTOR REGISTRATION (52.204-7) ALTERNATE A (SEP 2007) (a) Definitions. As used in this clause-- "Central Contractor Registration (CCR) database" means the primary Government repository for contractor information required for the conduct of business with the Government. "Commercial and Government Entity (CAGE) code" means-- (1) A code assigned by the Defense Logistics Information Service (DLIS) to identify a commercial or Government entity; or (2) A code assigned by a member of the North Atlantic Treaty Organization that DLIS records and maintains in the CAGE master file. This type of code is known as an "NCAGE code." "Data Universal Numbering System (DUNS) number" means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities. "Data Universal Numbering System +4 (DUNS+4) number" means the DUNS number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional CCR records for identifying alternative Electronic Funds Transfer (EFT) accounts (see Subpart 32.11 of the Federal Acquisition Regulation) for the same parent concern. "Registered in the CCR database" means that-- (1) The Contractor has entered all mandatory information, including the DUNS number or the DUNS+4 number, into the CCR database; (2) The Contractor's CAGE code is in the CCR database; and (3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service, and has marked the records ``Active.'' The Contractor will be required to provide consent for TIN validation to the Government as part of the CCR registration process. (b)(1) By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the CCR database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation. (2) The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "DUNS" or "DUNS +4" followed by the DUNS or DUNS +4 number that identifies the offeror's name and address exactly as stated in the offer. The DUNS number will be used by the Contracting Officer to verify that the offeror is registered in the CCR database. (c) If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. (1) An offeror may obtain a DUNS number- (i) If located within the United States, by calling Dun and Bradstreet at 1-866-705-5711 or via the Internet at http://www.dnb.com; or (ii) If located outside the United States, by contacting the local Dun and Bradstreet office. (2) The offeror should be prepared to provide the following information: (i) Company legal business. (ii) Tradestyle, doing business, or other name by which your entity is commonly recognized. (iii) Company Physical Street Address, City, State, and Zip Code. (iv) Company Mailing Address, City, State and Zip Code (if separate from physical). (v) Company Telephone Number. (vi) Date the company was started. (vii) Number of employees at your location. (viii) Chief executive officer/key manager. (ix) Line of business (industry). (x) Company Headquarters name and address (reporting relationship within your entity). (d) If the Offeror does not become registered in the CCR database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. (e) Processing time, which normally takes 48 hours, should be taken into consideration when registering. Offerors who are not registered should consider applying for registration immediately upon receipt of this solicitation. (f) The Contractor is responsible for the accuracy and completeness of the data within the CCR database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the CCR database after the initial registration, the Contractor is required to review and update on an annual basis from the date of initial registration or subsequent updates its information in the CCR database to ensure it is current, accurate and complete. Updating information in the CCR does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document. (g) (1) (i) If a Contractor has legally changed its business name, "doing business as" name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in Subpart 42.12, the Contractor shall provide the responsible Contracting Officer a minimum of one business day's written notification of its intention to (A) change the name in the CCR database; (B) comply with the requirements of Subpart 42.12 of the FAR; and (C) agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor must provide with the notification sufficient documentation to support the legally changed name. (ii) If the Contractor fails to comply with the requirements of paragraph (g)(1)(i) of this clause, or fails to perform the agreement at paragraph (g)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the CCR information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the "Suspension of Payment" paragraph of the electronic funds transfer (EFT) clause of this contract. (2) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the CCR record to reflect an assignee for the purpose of assignment of claims (see FAR Subpart 32.8, Assignment of Claims). Assignees shall be separately registered in the CCR database. Information provided to the Contractor's CCR record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the "Suspension of payment" paragraph of the EFT clause of this contract. (h) Offerors and Contractors may obtain information on registration and annual confirmation requirements via the internet at http://www.ccr.gov or by calling 1-888-227-2423, or 269-961-5757. (End of clause) 252.212-7001 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS APPLICABLE TO DEFENSE ACQUISITIONS OF COMMERCIAL ITEMS (JAN 2009) (DEVIATION) (a) In addition to the clauses listed in paragraph (b) of the Contract Terms and Conditions Required to Implement Statutes or Executive Orders--Commercial Items clause of this contract (FAR 52.212-5 (FEB 2008) (DEVIATION), the Contractor shall include the terms of the following clause, if applicable, in subcontracts for commercial items or commercial components, awarded at any tier under this contract: 252.225-7014 Preference for Domestic Specialty Metals, Alternate I (APR 2003) (10 U.S.C. 2533a). 252.237-7019 Training for Contractor Personnel Interacting with Detainees (SEP 2006) (Section 1092 of Pub. L. 108-375). 252.247-7023 Transportation of Supplies by Sea (MAY 2002) (10 U.S.C. 2631) 252.247-7024 Notification of Transportation of Supplies by Sea (MAR 2000) (10 U.S.C. 2631) (End of clause) 252.225-7041 CORRESPONDENCE IN ENGLISH (JUNE 1997) The Contractor shall ensure that all contract correspondence that is addressed to the United States Government is submitted in English or with an English translation. (End of clause) 252.229-7001 TAX RELIEF (JUN 1997) (a) Prices set forth in this contract are exclusive of all taxes and duties from which the United States Government is exempt by virtue of tax agreements between the United States Government and the Contractor's government. The following taxes or duties have been excluded from the contract price: NAME OF TAX: VAT/KDV RATE (PERCENTAGE): 18% (b) The Contractor's invoice shall list separately the gross price, amount of tax deducted, and net price charged. (c) When items manufactured to United States Government specifications are being acquired, the Contractor shall identify the materials or components intended to be imported in order to ensure that relief from import duties is obtained. If the Contractor intends to use imported products from inventories on hand, the price of which includes a factor for import duties, the Contractor shall ensure the United States Government's exemption from these taxes. The Contractor may obtain a refund of the import duties from its government or request the duty-free import of an amount of supplies or components corresponding to that used from inventory for this contract. (End of clause) 252.222-7002 COMPLIANCE WITH LOCAL LABOR LAWS (OVERSEAS) (JUN 1997) (a) The Contractor shall comply with all- (1) Local laws, regulations, and labor union agreements governing work hours; and (2) Labor regulations including collective bargaining agreements, workers' compensation, working conditions, fringe benefits, and labor standards or labor contract matters. (b) The Contractor indemnifies and holds harmless the United States Government from all claims arising out of the requirements of this clause. This indemnity includes the Contractor's obligation to handle and settle, without cost to the United States Government, any claims or litigation concerning allegations that the Contractor or the United States Government, or both, have not fully complied with local labor laws or regulations relating to the performance of work required by this contract. (c) Notwithstanding paragraph (b) of this clause, consistent with paragraphs 31.205-15(a) and 31.205-47(d) of the Federal Acquisition Regulation, the Contractor will be reimbursed for the costs of all fines, penalties, and reasonable litigation expenses incurred as a result of compliance with specific contract terms and conditions or written instructions from the Contracting officer. (End of clause) 252.232-7003 ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (MAR 2008) (a) Definitions. As used in this clause-- (1) Contract financing payment and invoice payment have the meanings given in section 32.001 of the Federal Acquisition Regulation. (2) Electronic form means any automated system that transmits information electronically from the initiating system to all affected systems. Facsimile, e-mail, and scanned documents are not acceptable electronic forms for submission of payment requests. However, scanned documents are acceptable when they are part of a submission of a payment request made using Wide Area WorkFlow (WAWF) or another electronic form authorized by the Contracting Officer. (3) Payment request means any request for contract financing payment or invoice payment submitted by the Contractor under this contract. (b) Except as provided in paragraph (c) of this clause, the Contractor shall submit payment requests and receiving reports using WAWF, in one of the following electronic formats that WAWF accepts: Electronic Data Interchange, Secure File Transfer Protocol, or World Wide Web input. Information regarding WAWF is available on the Internet at https://wawf.eb.mil/. (c) The Contractor may submit a payment request and receiving report using other than WAWF only when-- (1) The Contracting Officer authorizes use of another electronic form. With such an authorization, the Contractor and the Contracting Officer shall agree to a plan, which shall include a timeline, specifying when the Contractor will transfer to WAWF; (2) DoD is unable to receive a payment request or provide acceptance in electronic form; (3) The Contracting Officer administering the contract for payment has determined, in writing, that electronic submission would be unduly burdensome to the Contractor. In such cases, the Contractor shall include a copy of the Contracting Officer's determination with each request for payment; or (4) DoD makes payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD-approved electronic third party payment system or other exempted vendor payment/invoicing system (e.g., PowerTrack, Transportation Financial Management System, and Cargo and Billing System). (d) The Contractor shall submit any non-electronic payment requests using the method or methods specified in Section G of the contract. (e) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payments requests. (End of clause) 252.233-7001 CHOICE OF LAW (OVERSEAS) (JUNE 1997) This contract shall be construed and interpreted in accordance with the substantive laws of the United States of America. By the execution of this contract, the Contractor expressly agrees to waive any rights to invoke the jurisdiction of local national courts where this contract is performed and agrees to accept the exclusive jurisdiction of the United States Armed Services Board of Contract Appeals and the United States Court of Federal Claims for hearing and determination of any and all disputes that may arise under the Disputes clause of this contract. (End of clause) 252.246-7000 MATERIAL INSPECTION AND RECEIVING REPORT (MAR 2008) (a) At the time of each delivery of supplies or services under this contract, the Contractor shall prepare and furnish to the Government a material inspection and receiving report in the manner and to the extent required by Appendix F, Material Inspection and Receiving Report, of the Defense FAR Supplement. (b) Contractor submission of the material inspection and receiving information required by Appendix F of the Defense FAR Supplement by using the Wide Area WorkFlow (WAWF) electronic form (see paragraph (b) of the clause at 252.232-7003) fulfills the requirement for a material inspection and receiving report (DD Form 250). Two copies of the receiving report (paper copies of either the DD Form 250 or the WAWF report) shall be distributed with the shipment, in accordance with Appendix F, Part 4, F-401, Table 1, of the Defense FAR Supplement. (End of clause) 5352.201-9101 Ombudsman. OMBUDSMAN (AUG 2005) (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, concerned parties may contact the Center/MAJCOM ombudsmen, Colonel Paul R. Horst, phone number (49) 6371-47-2207, facsimile number (49) 6371-47-1-2025, paul.horst@ramstein.af.mil, Mr. Dave Jones, phone number (49) 6371-47-1-2209, facsimile number (49) 6371-47-1-2025, dave.jones@ramstein.af.mil, HQ USAFE/A7K Ramstein Air Base 66877 Ramstein, Germany. Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067. Concerns, issues, disagreements, and recommendations that cannot be resolved at the MAJCOM/DRU level, may be brought by the concerned party for further consideration to the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (703) 588-7004, facsimile number (703) 588-1067. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the Contracting Officer. (End of clause) 5352.242-9000 Contractor access to Air Force installations. CONTRACTOR ACCESS TO AIR FORCE INSTALLATIONS (JUN 2002) (a) The contractor shall obtain base identification and vehicle passes for all contractor personnel who make frequent visits to or perform work on the Air Force installation(s) cited in the contract. Contractor personnel are required to wear or prominently display installation identification badges or contractor-furnished, contractor identification badges while visiting or performing work on the installation. (b) The contractor shall submit a written request on company letterhead to the contracting officer listing the following: contract number, location of work site, start and stop dates, and names of employees and subcontractor employees needing access to the base. The letter will also specify the individual(s) authorized to sign for a request for base identification credentials or vehicle passes. The contracting officer will endorse the request and forward it to the issuing base pass and registration office or security police for processing. When reporting to the registration office, the authorized contractor individual(s) should provide a valid driver's license, current vehicle registration, and valid vehicle insurance certificate to obtain a vehicle pass. (c) Our office will certify applications for gate passes for Turkish pass and ID. The Turkish Air Force will coordinate with contractors to attain the necessary documents and information to grant access to the installation. The U.S. government will not be held liable for any delays or breach of contract caused by refusal of the Turkish Air Force to grant a gate pass to a contractor. If a gate pass is not granted to a contractor allowing the delivery of goods, execution of warranty support, or performance of services please contact the contracting officer immediately. Below is a number to the Turkish Air Force Pass and ID for all gate pass issues: 322-316-4184 or 322-316-4186 (d) Performance of this contract is located on a Turkish Air Force installation, and all access to the installation is controlled and granted by the Turkish Air Force (TAF) Security Battalion. (e) Prior to commencing work the Contractor shall furnish a complete list of all vehicles and personnel involved in the accomplishment of the contract work to the Turkish Air Force Pass and ID or designated representative to ensure access to the respective installations. The following information must be furnished on this list: Vehicles: Make, model, year of manufacture, capacity, type, license number, and insurance policy number. Personnel: First and last name, date of birth, place of birth, passport or identification card number, place of residence and any such other information, as required, to satisfy individual air base or army security regulations governing access to granting of passes to the particular military establishment. (f) All passes may be obtained from the Turkish Air Force Pass and ID or designated representative approximately 10 days after the aforementioned lists have been submitted. The contractor shall inform all assigned workers that they may be subject to search, at the discretion of the installation commander, when entering or leaving the installation. (g) Installation passes will be returned immediately to the Issuing Officer when: (1) Pass has expired. (2) Pass holder is no longer employed by the Contractor. (3) Contract is completed. (4) Issuing Officer so directs. (h) During performance of the contract, the contractor shall be responsible for obtaining required identification for newly assigned personnel and for prompt return of credentials and vehicle passes for any employee who no longer requires access to the work site. (1) When work under this contract requires unescorted entry to controlled or restricted areas, the contractor shall comply with AFI 31-101, Volume 1, The Air Force Installation Security Program, and AFI 31-501, Personnel Security Program Management, as applicable. (j) Upon completion or termination of the contract or expiration of the identification passes, the prime contractor shall ensure that all base identification passes issued to employees and subcontractor employees are returned to the issuing office. (k) Failure to comply with these requirements may result in withholding of final payment. (End of clause)
Web Link: FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=c747660bcfba72ebdaf48715150372b6&tab=core&_cview=1)
Place of Performance: Address: Incirlik AB, Turkey, Adana, 09824, United States; Zip Code: 09824
Record: SN01760962-W 20090305/090303221137-c747660bcfba72ebdaf48715150372b6 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

J -- LGCB FIRE TRAINER MAINTENANCE - Pre-Proposal Site Visit Reservation Form - Technical Order