SOLICITATION NOTICE
46 -- RFQ for 4520-00-143-9400 HEATER, WATER, ELECTRIC - RFQ for 4520-00-143-9400 HEATER, WATER, ELECTRIC
- Notice Date
- 3/16/2009
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 335228
— Other Major Household Appliance Manufacturing
- Contracting Office
- General Services Administration, Federal Acquisition Service (FAS), Southwest Supply Center (QSDAC), 819 Taylor St Room 6A00, Fort Worth, Texas, 76102, United States
- ZIP Code
- 76102
- Solicitation Number
- FPNE6U4699HEATERWATERELECTRIC
- Archive Date
- 12/31/2009
- Point of Contact
- Stephen J Bartley,, Phone: 817 574 2534
- E-Mail Address
-
stephen.bartley@gsa.gov
- Small Business Set-Aside
- N/A
- Description
- RFQ for proposed one-time buy for NSN 4520-00-143-9400 HEATER, WATER, ELECTRIC: 150 EA RFQ for a proposed one-time buy for 150 EA, 4520-00-143-9400 HEATER, WATER, ELECTRIC as follows: NSN: 4520-00-143-9400 HEATER, WATER, ELECTRIC: Shall conform to Underwriters Laboratories Standard for Safety, Household Electric Storage Tank Water Heaters, UL 174. The water heater shall be a self-contained electric water heater with all necessary controls mounted as an integral unit intended to provide hot water for residential use, and shall have the following characteristics: Glass-lined steel tank Round model Double heating elements Capacity - 52 gallons Power input - Regular 1) Glass lined (porcelain enameled) round steel tank with a 52 gallon capacity. The glass lining thickness shall be in accordance with industry practice and applied to all interior surfaces that are exposed to hot water. 2) The water heater shall have double heating elements with regular power input of 1000 watts for the lower unit and 1500 watts for the upper unit. 3) The water heater shall operate on alternating current and have nameplate voltage ratings of 230-240 volts and shall be suitable for operation on 208 volts systems. 4) All parts and assemblies of the water heater shall be interchangeable with the same type, model, size and manufacturer. 5) A combination temperature/pressure relief valve conforming to ANSI Z21.22 shall be installed on, or supplied with the water heater. If the valve is not installed, complete instructions for installation shall be supplied with the valve. The pressure setting of the valve shall not exceed the maximum working pressure of the water storage tank. 6) Acceptable evidence of compliance with the requirements of UL 174 shall be a UL label or listing mark; or a certified test report from an independent testing laboratory acceptable to the Government indicating the electric water heater has passed all tests, may be acceptable as evidence of conformance to the requirements of UL 174. In accordance with the Energy Policy Act of 2005, the Federal Acquisition Regulations Section 23, and Presidential Executive Order 13123 the vendor shall provide electric water heaters that meet or exceed the latest Federal Energy Management Program (FEMP) energy-efficiency purchasing specifications. Refer to the FEMP Web site at www.eere.energy.gov/femp/procurement/ to obtain proper sizing and cost-effectiveness data, operating tips and other important information. Rated Storage Volume- Less than 60 gallons Energy Factor- 0.93 or more Annual Energy Use- 4,721 kWh/year or less Unit of issue – EA (each) PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129. PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply: Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17. The standards referenced in this purchase description shall be the issues in effect on the date of issuance of the invitation for bids or request for proposals. (1/29/09) ********************************************************** PROBABLE FORWARDER (1611 ORDER): East Coast ********************************************************** See attached requirements
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=a171c4653144e32c81112508d174ad87&tab=core&_cview=1)
- Record
- SN01770162-W 20090318/090316215518-a171c4653144e32c81112508d174ad87 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |