Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF MARCH 19, 2009 FBO #2670
SOLICITATION NOTICE

J -- DRYDOCK REPAIRS TO USCGC THETIS (WMEC-910)

Notice Date
3/17/2009
 
Notice Type
Presolicitation
 
NAICS
336611 — Ship Building and Repairing
 
Contracting Office
Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102
 
ZIP Code
23510-9102
 
Solicitation Number
HSCG80-09-Q-3FAJ80
 
Archive Date
5/8/2009
 
Point of Contact
FREDRICK BARAT BAECHLE,, Phone: 757-628-4652, Beverly A Garner,, Phone: (757) 628-4663
 
E-Mail Address
FREDRICK.B.BAECHLE@USCG.MIL, Beverly.A.Garner@uscg.mil
 
Small Business Set-Aside
Total Small Business
 
Description
The U.S. Coast Guard intends to issue a Commercial Request for Quote (RFQ) for Dry Dock repairs to the USCGC THETIS (WMEC-910), A 270 foot “B” class medium endurance cutter. The homeport of the vessel is Key West, FL.. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Request for Quote (RFQ), on or about April 03, 2009. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPS) web page at www.fbo.gov. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPS web page for RFQ release and all subsequent amendments. FEDBIZOPS also contains an option automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A SET-ASIDE FOR SMALL BUSINESS CONCERNS. The performance period is sixty (60) calendar days and is expected to begin on or about 29 June 2009 and end on or about 27 August 2009. The scope of the acquisition is for the overhauling, renewing and repairing of various items aboard the USCGC THETIS (WMEC-910) This work will include, but is not limited to: List (1Clean and Inspect Grey Water Collection and Holding Tanks Clean and Inspect Sewage Collection and Holding Tanks 3Remove and Reinstall Propeller Shafts And Inspect Stern Tubes Inspect Propeller Shafts (AFC-45)5Remove, Inspect, and Reinstall Intermediate Shafts <CMP,Renew Shaft Covering Renew Water-Lubricated Shaft Bearings Renew Propeller Shaft Sleeve(s) Remove and Reinstall Controllable Pitch Propeller Hubs10Service Both Onboard Controllable Pitch Propeller Systems 11 Renew Depth Indicating Transducers12Renew Speed Doppler 13Overhaul and Renew Valves 14Overhaul ASW Valves 15Overhaul and Renew Firemain Valves 16Clean, Inspect and Test Hot Water Accumulator Tank and Hydro-Pneumatic Tank 17Service Rudder Assemblies 18Service Fin Stabilizer Systems19Perform Anchor, Anchor Chain, and Ground Tackle Maintenance 20Preserve Anchor, Anchor Chain, and Ground Tackle 21Inspect Chain Lockers 22Repair and Preserve Ballast Tanks - Partial 23Preserve Sewage Collection and Holding Tanks 24Preserve Grey Water Collection and Holding Tanks –25Preserve Underwater Body – “100%” 26Preserve Underwater Body - "Partial"27Preserve Freeboard Surfaces - Partial (In Drydock) 28Renew Cathodic Protection System 29Routine Drydocking 30Provide Temporary Logistics 31Repair and Preserve JP-5 Bilge Surfaces 32Preserve Auxiliary II Bilge Surfaces 33Repair Auxiliary Machinery Space #1 Deck Repair 02 Deck 35Repair Auxiliary Machinery Space #2 Bilge Plating 36Overhaul Stern Tube Seal Assemblies37Inspect Simplex and Renew Duplex Sea Strainers 38Renew Lube Oil and Oily Waste Tank Stuffing/Sounding Tubes 39Repair Plenum Chamber 40Upgrade Fire Pumps (AC&I)41Install SSDG Jacket Water Cooler Duplex Strainer and Flow Control System :. All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. All reference documents are available for viewing at 300 East Main Street, Suite 600, Norfolk, VA 23510-9102Drawings are now available on CD-ROM. The CD-ROM sets are available for all cutters and will be free of charge to contractors upon request [ten days from solicitation issuance]. MLCA must have ten (10) days advance notice to complete a CD-ROM set of drawings. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact, the Contracting Official listed above. Quotes are due on or about April 23, 2009, 200 pm Eastern Standard Time to: Commander (vpl-2) MLCLANT, 300 East Main Street, Suite 600, Norfolk, VA 23510-9102. Requests for Quotations and additional information requests may be faxed to (757) 628-4676 Attn: Fredrick (Barat) Baechle.at Fredrick.B.Baechle@uscg.mil or call (757) 628-4652.
 
Web Link
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=ecb0c95fef7224c1e784c40d02f41c41&tab=core&_cview=1)
 
Record
SN01770842-W 20090319/090317215817-ecb0c95fef7224c1e784c40d02f41c41 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.