PRESOL | 61 | Purchase of Remote Area Lighting Systems, Primary Distribution PanelSecondary Distribution System, Manifold Fueling. See attached specs.

FBO DAILY ISSUE OF MARCH 28, 2009 FBO #2679
SOLICITATION NOTICE

61 -- Purchase of Remote Area Lighting Systems, Primary Distribution PanelSecondary Distribution System, Manifold Fueling. See attached specs.

Notice Date: 3/26/2009
Notice Type: Combined Synopsis/Solicitation
NAICS: 335311 — Power, Distribution, and Specialty Transformer Manufacturing
Contracting Office: Department of the Army, U.S. Army Corps of Engineers, U.S. Army Humphreys Engineer Center Support Activity, US Army Humphreys Engineer Center Support Activity, ATTN: CEHEC-CT, 7701 Telegraph Road, Alexandria, VA 22315-3860
ZIP Code: 22315-3860
Solicitation Number: W912HQ-09-T-0009
Response Due: 3/30/2009
Archive Date: 5/29/2009
Point of Contact: florence ramsey, 703-428-6421<br />
Small Business Set-Aside: Total Small Business
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; propThis is a combined synopsis/solicitation for commercial items prepared in accordance with format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Reference Number W912HQ-09-T-0009 is issued as a Request for Quote (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2001-31. This solicitation is a 100 percent set aside for small business; the associated NAICS is 335311 and small business size standard is 750 employees. Clauses may be accessed electronically in full text through http://farsite.hill.af.mil Contractors must be actively registered with the Central Contractor Registration (CCR) at http://www.ccr.gov The following provisions apply FAR 52.212-1, Instructions to Offerors-Commercial. FAR 52.212-3, Offerors Representation and Certifications Commercial Item, FAR 52.212-4 Contract Terms and Condition-Commercial Items, FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items, and DFARS 252.212.7001 Contract Terms and Conditions Required to Implement Statues or Executive Orders Applicable to Defense Acquisitions of Commercial Items The date, time and request for quote offer are due 1:00 PM EDT, 30 March 2009, to Florence.e.ramsey@usace.army.mil or fax to Attn: Flo Ramsey @703-428-8181. It is the responsibility of the offeror to submit your quote by the date and time mentioned above. No late quotes will be accepted. CLIN 0001 Qty 1 each $_____________ Remote Area Lighting Systems (RALS) Each RALS container receives 120/208 VAC, 3-phase power from a secondary power source through a 60-amp cable (not supplied with the RALS) that is plugged into the 60-amp input connector. Two loop cable assemblies, stored in bins in the RALS container, are laid out in the area to be lighted, and connected to output receptacles on the RALS. The total length of each loop assembly is 750 feet. At 125 feet intervals along the loop cord, one-fixture light assembly is mounted on 15 feet high support poles. One light assembly mounts directly to the RALS container. These items are also stored in the container. The fixtures are connected to receptacles on the loop cable assembly. A photoelectric cell on the RALS, or the manual bypass toggle switch, controls the application of power to the lights. The RALS is designed for safe operation and conforms to the NEC for outdoor use. CLIN 0002 Qty 2 each $_____________ Primary Distribution Panel (PDP) Two PDP models are available to meet distribution requirements; the Class L Connector 25kW PDP, Model 1R0420-1, and the Commercial Connector 25KW PDP, Model 1R0420-2. The PDP models differ only by the type of connector used, i.e., Class L or commercial connector. The PDP distributes 1-phase and 3-phase low voltage electrical power from a 120/208 Volt AC (VAC) power source such as a DPGDS Secondary Distribution Center (SDC), or a Tactical Quiet Generator (TQG), to various facility applications. The PDP receives 120/208 VAC power from a power source and distributes 120/208 VAC 3-phase or 120 VAC 1-phase power to connected loads. CLIN 0003 QTY 2 each $_____________ Secondary Distribution System (SDS) The function of the Secondary Distribution Center (SDC) is to accept primary power and reduce the voltage for distribution. Primary power can be either from a commercial power plant, engine driven prime power generator sets, or from another SDC. The SDC is designed to accept primary power at 4160VAC, 60Hz, or 3800VAC, 50Hz, 3-phase from any source utilizing Load break Elbows and reduce the voltage (by a 150kVA transformer) to 120/208VAC, 60 or 50Hz, 3-phase for distribution. The SDC is used to provide power for equipment requiring 120/208VAC electrical power. The SDC is also equipped with two (2) additional sets of Medium Voltage Output Load break Elbow connections (bushing wells). These connections are used for parallel operations with additional SDCs, forming a common bus. The SDC can also accept secondary power from a Mission Essential Power (MEP) generator set. MEP generators feed through a circuit breaker to the secondary bus. The breaker is interlocked to prevent inadvertently feeding the secondary bus from two power sources. Electrical power distribution consists of circuit breakers feeding pin and sleeve type connectors which permit connecting the secondary cable feeders which in turn feed out to the load centers. The pin and sleeve connectors are designed to meet MIL-C-22992 or commercial equivalent specifications. The equipment is designed for safe operation and it conforms to the National Electric Code (NEC) for outdoor use. The phase rotation is A, B, C for the Secondary Output Circuit. See Appendix C for the schematic diagrams of the electrical systems for all 4 SDC models. See Appendix A for listing of components supplied with the SDC. Auxiliary cable assemblies, primary cables and secondary cables are not supplied with the SDC. CLIN 0004 QTY 2 each $______________ Manifold Fueling The manifold is used to distribute liquid fuels to each PU. Up to 4-units can be supported by one manifold. The manifold has 7-ball valves. Two open or shut off fuel to the manifold from the 3 inlet couplings. One ball valve (in the center of the manifold) is used control fuel to each side of the manifold. Four ball valves (one for each PU supply Hose) are used to open or shut off fuel to each of the manifold hoses. The manifold has the following characteristics: " Two 3-inch Camloc inlets " Four 1-inch (JIC) male flare outlets " Each inlet and outlet has its own ball valves to control flow direction " A union in order to breakdown into 2 smaller sections for shipping and handling CLIN 0005 1 lump sum $_______________ SHIPPING CHARGES Ship to Address: 249th Engineer Battalion CW4 Shoefstall 1416 Jackson Loop Fort Belvoir, VA 22060 osals are being requested and a written solicitation will not be issued.
Web Link: FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=98a951452a55b0a0dac3630fd7c1cc01&tab=core&_cview=1)
Place of Performance: Address: US Army Humphreys Engineer Center Support Activity ATTN: CEHEC-CT, 7701 Telegraph Road Alexandria VA<br />; Zip Code: 22315-3860<br />
Record: SN01778957-W 20090328/090326220811-98a951452a55b0a0dac3630fd7c1cc01 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

61 -- Purchase of Remote Area Lighting Systems, Primary Distribution PanelSecondary Distribution System, Manifold Fueling. See attached specs.