SOURCES SOUGHT
99 -- Militarization of Construction Equipment for Navy Expeditionary Forces
- Notice Date
- 3/31/2009
- Notice Type
- Sources Sought
- NAICS
- 541330
— Engineering Services
- Contracting Office
- Department of the Navy, Naval Facilities Engineering Command, Specialty Center Acquisitions NAVFAC, N62583 SPECIALTY CENTER ACQUISITIONS NAVFAC 1205 Mill Road Building 850 Port Hueneme, CA
- ZIP Code
- 00000
- Solicitation Number
- N6258309R0073
- Response Due
- 4/17/2009
- Archive Date
- 5/2/2009
- Point of Contact
- Ricardo F. Balatbat805-982-4842<br />
- Small Business Set-Aside
- N/A
- Description
- Description:This is a sources sought synopsis. The intent of this sources sought synopsis is to identify potential qualified contractors that are capable to provide engineering, design, logistics efforts and fabrication to militarize commercial construction equipment. The offerors shall be required to purchase or manufacture commercial construction equipment and modify the commercial equipment to meet specific Military requirements. Modification for Military requirements shall include that all diesel engines are JP-8 compatible; trailers and any over the road equipment are wired to tactical vehicle interfaces of STANAG 4007 including black out lights; the trailer mounted construction equipment shall meet or exceed MIL-STD-209 for lift and tie down requirement for transportation by rail, highway, ship and air if possible; coat the construction equipment with Chemical Agent Resistant Covering (CARC) paint in accordance with MIL-C-53039 with the color SEABEE green, chip #34064 lusterless! flat in accordance with FED-STD-595; and military markings. The contractor shall verify by testing that the construction equipment is compatible with JP-8 fuel; lifting/tie-downs meet the requirements of MIL-STD-209; MIL-STD-209 information plates are valid and other required markings are installed, including Item Unique Identification (IUID); and thickness and application of paint shall meet military standards. The contractor shall provide maintenance manuals; operational manuals; operational/maintenance training; spare parts list with provisioning information; Transportability Report on each of the different types of construction equipment. The construction equipment for this effort is listed below. A. CRUSHER ROCK PRIMARY PORTABLE CAPABLE OF CRUSHING ROCK AT 250 TPH ECCENTRIC JAW CRUSHER WITH HI TORQUE CRUSHER DUTY MOTOR TOGGLE PLATE, JAW PLATES, SELF-ALIGNING BEARINGS, CHROME/MOLYBDENUM SHAFT CASE STEEL PITMAN W/ PROTECTION PLATE AND FABRICATED STEEL BASE W REINFORCING RIBS OSHA/MSHA APPROVED CRUSHER DRIVE GUARDS 42"W X 20'L VIBRATING GRIZZLY FEEDER. B. CRUSHER, ROCK, SECONDARY, CONE, PORTABLE 250 TPH AND SCREEN PLANT ROLLER CONE STAND HEAD W/ ELECTRIC MOTORS CAST STEEL BSE, HYDRO-PNEUMATIC TRAMP IRON RELIEF STEM LONG TRAVELING RELIEF CYLINDERS, OVERSIZE THRUST AND RADIAL ROLLER BEARING CLOSE RUNNING DEEP TAPERED GROOVED LABYRINTH SEALS (NON CONTACT TYPE) SELF CONTAINED OIL RESERVOIR. C. CRUSHER ROCK IMPACT EXPEDITIONARY WITH SCREENING CAPABILITY 250 TONS PER HOUR HORIZONTAL SHAFT IMPACTER, 47X47 SOLID STEEL 3 BAR ROTOR ADJUSTABLE PRIMARY AND SECONDARY CURTAINS FOR PRECISE PRODUCT GRADATION CONTROL HYDRAULIC OPENING IMPACT HOUSING UNOBSTRUCTED ACCESS TO CRUSHING CHAMBER AND SECONDARY CURTAIN ADJUSTMENT48X34 FEED OPENING DRIVE GUARD AND IMPACTER TOOL D. CONVEYOR, BELT, PORTABLE, WHEEL MOUNTED, EMD, 230/460 VOLTS, 3 PHASE, 60 HERTZ, 24 IN WIDE X 60 FT LONG, 260 FT PER MINUTE, 300 TPH, HYDRAULIC HEIGHT, ADJUSTMENT. CONVEYOR, REQUIRED TO BE COMPATIBLE WITH A., B., AND C. E. CONCRETE PUMP TRUCK 160 CY/HR MIN, EQUIPPED WITH 100 FT VERTICAL AND 85 FT HORIZONTAL REACH 5 SECTION FOLDING BOOM OPTIONAL 180 DEGREE DISCHARGE ELBOW. F. MIXER, ROTARY, SOIL STABILIZER, SELF-PROPELLED, HYDROSTATICALLY DRIVEN, MIXING WIDTH NLT 76 IN, MIXING DEPTH 0 TO 10-1/2 IN, DEPTH, ADDITIVE PUMP AND SPRAY BAR. Request interested firms to submit a one page plan of action on how the Engineering Support will be completed and how the equipment will be procured, modified and delivered. Request interested firms to submit within 3 weeks and information via email in word document. Provide type if you are Small Business or Large Business. The Government has not decided the appropriate NAICS Code and anticipates after the responses from source of sought below are the list of NAICS CODE:423810- Construction and Mining, Machinery and Equipment 333120- Construction Machinery Manufacturing333131- Mining Machinery and Equipment Manufacturing541330- Engineering Services shall team with manufacturer and fabricator Point of Contact: Ricardo Balatbat, Contract Specialist, Phone 805-982-4842, Fax 805-982-3015, Email ricardo.balatbat@navy.mil : carolyn.contreras@navy.mil
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=20a6b7c77139745c9b6edca608599361&tab=core&_cview=1)
- Record
- SN01781291-W 20090402/090331220154-20a6b7c77139745c9b6edca608599361 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |