SOLICITATION NOTICE
81 -- DRUM, SHIPPING AND STORAGE
- Notice Date
- 4/21/2009
- Notice Type
- Presolicitation
- NAICS
- 332214
— Kitchen Utensil, Pot, and Pan Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, Defense Supply Center Columbus BSM, P O Box 3990, Columbus, Ohio, 43216-5000
- ZIP Code
- 43216-5000
- Solicitation Number
- SPM7M209R0068
- Archive Date
- 6/23/2009
- Point of Contact
- Tracy L. Holmes, Phone: 6146927780
- E-Mail Address
-
tracy.holmes@dla.mil
- Small Business Set-Aside
- Total Small Business
- Description
- This notice is to announce that this NSN will be solicited in the near future. This is not a Soliciation/Request for Proposal. The Soliciation/Request for Proposal will be forth coming and will be available via the DSCC Website address (URL) is http://dibbs.dscccols.com/rfp. The response date referenced above is estimated. Solicitation Issue date is on or about 05/08/09, with the Response date on or around 06/08/09. Note: Copies of this solicitation will only be available via the World Wide Web. Hard copies of this solicitation are not available. All responsible sources may submit an offer/quote, which shall be considered. PURCHASE REQUEST NUMBER IS #0021188104, NSN: 8110-00-030-7780, DRUM, SHIPPING AND STORAGE. QUANTITY: 13.021. UNIT OF ISSUE: EACH. PURCHASE REQUEST WILL SOLICITED AS A SMALL BUSINESS SET-ASIDE. Item Description: DRUM, STEEL, SHIPPING AND STORAGE I.A.W. 49 CFR 178 SUBPART L AND SUBPART M CFR SECTION 178 AS APPLIES. UN 1A2/Y1.5/150 IDENTIFY TO: MIL-STD-130N, 17 DEC 2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY RATED (MARKED) CAP. 208 LITERS (55 GAL.) & MINIMUM OVERALL CONTENT 216.5 LITERS (57.2 GAL.) MINIMUM HEIGHT WITHOUT COVER 864MM, + OR - 3.18MM (34 IN., + OR - 0.125 IN.). MINIMUM INSIDE DIA. IS 572MM, + OR - 1.59MM (22.5 IN., + OR - 0.0625 IN.). MINIMUM MATERIAL THICKNESS OF DRUM IS 1.09MM (0.0428 IN.). DRUM SHALL BE TESTED I.A.W. UN/POP 1A2/Y1.5/150. MARKINGS: DRUM SHALL BE MARKED I.A.W. UN RQMTS. FULL REMOVEABLE HEAD WITH NUT AND BOLT TYPE LOCKING RING. MINIMUM MATERIAL THICKNESS FOR LOCKING RING 2.40MM (0.0946 IN.). MINIMUM MATERIAL THICKNESS OF BOLT IS 15.875MM (0.625 IN.). MINIMUM LENGTH IS 88.9MM (3.500 IN.). PROTECTIVE COATING: COAT ALL EXTERIOR SURFACES OF THE DRUM (INCLUDING COMPONENT PARTS), EXCEPT THE CLOSING BOLT AND GASKET (WHEN SUPPLIED), WITH A RUST INHIBITING COATING THAT WITHSTANDS THE SALT SPRAY TEST REQUIREMENTS OF ASTM-B-117 UTILIZING A FIVE PERCENT SALT SOLUTION AT 35 DEGREES C (120 DEGREES F) FOR A MINIMUM EXPOSURE TIME OF 96 HOURS. RESULTS OF THE SALT SPRAY TEST SHALL SHOW NO RUST CREEPAGE, BLISTERING, UNDERCUTTING OR LOSS OF ADHESION OF THE PAINT BEYOND 1/8 INCH OF THE SCRIBE MARK. ALL OTHER SURFACES OF THE TEST SPECIMENS SHALL SHOW NO MORE THAN A TRACE OF FILM FAILURE, (RUST GRADE 9 OF ASTM-D-610), WITH NONE LARGER THAN 1MM, (3/64 INCH) IN DIAMETER. ACCEPTABLE COLORS, IAW FED STD 595, ARE AS FOLLOWS: NOS. 37038, 37030, 34082, 34083, 34086, 34089, 34092, 34102, 34127. BOLT & NUT SHALL BE INSTALLED TO THE LOCKING RING SO THEY WILL NOT BE LOST DURING SHIPMENT. DRUM SHALL BE FURNISHED FULLY ASSEMBLED. BERENFIELD CONTAINERS, INC. (9Z473) P/N DFS00001 Shipping Locations: W62G2T W1BG DEF DIST DEPOT SAN JOAQUN 25600 S CHRISMAN ROAD REC WHSE 16B PH 209 839 4307 TRACY CA 95304-5000 US And W25G1U TRANSPORTATION OFFICER DDSP NEW CUMBERLAND FACILITY 2001 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US
- Web Link
-
FedBizOpps Complete View
(https://www.fbo.gov/?s=opportunity&mode=form&id=bb32d2510aa2bf179c8a6ec2c77156f3&tab=core&_cview=1)
- Record
- SN01797734-W 20090423/090421215836-bb32d2510aa2bf179c8a6ec2c77156f3 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |