MODIFICATION
B -- RESIDUAL STRESS MEASUREMENTS USING THE CONTOUR METHOD
- Notice Date
- 5/8/2009
- Notice Type
- Modification
- NAICS
- 541330
— Engineering Services
- Contracting Office
- NASA/Lyndon B. Johnson Space Center, Houston Texas, 77058-3696, Mail Code: BH
- ZIP Code
- 77058-3696
- Solicitation Number
- NNJ09289547Q
- Response Due
- 5/14/2009
- Archive Date
- 5/8/2010
- Point of Contact
- Adrian D. Clayton, Contract Specialist, Phone 281-483-8498, Fax 281-244-0995
- E-Mail Address
-
Adrian D. Clayton
(adrian.d.clayton@nasa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- THIS NOTICE CONSTITUTES AMENDMENT NO. 2 TO THE COMBINED SYNOPSIS/RFQ FOR RESIDUALSTRESS MEASUREMENTS USING THE CONTOUR METHOD. Companies shall acknowledge allamendment(s) in their quote. This notice serves as the official amendment to subjectsynopsis/RFQ and a written amendment will not be issued.The purpose of this amendment is to answer the following technical questions:Question #1: Does the vendor supply the coupons or does NASA?Answer #1: NASA will supply the welded coupons.Question #2: Does it matter what software is used for the Finite Element Analysis (FEA)? Answer #2: There are no requirements on which FEA is used. Question #3: When is the project due?Answer #3: The first portion of the residual stresses are needed by August 2009. Question #4: The project involves several tasks (a-building fixture, b-wire EDM cutting,c-measurements of surface displacements, d-finite element modeling and anaysis). Do youwant a single offerror to perform all the tasks?Answer#4: It is preferable that one vendor perform all the tasks associated with thisjob.Question #5: Can you confirm that "residual stress over the mid-plane of the coupon"refers to a plane 1" by 0.5"?Answer #5: The residual stresses will be measured on the 7" by 1" plane.Question #6: Can an offerror bid as prime and sub-contract some of the tasks?Answer #6: There are a very limited number of samples available, therefore it ispreferred that a single vendor with the adequate experience perform the tasks. Question #7: Does the project involve travel to your site that will be part of thequotation?Answer #7: No travel is required. The samples will be sent to the vendor formeasurements.Question #8: How many coupons are there?Answer #8: Three samples.Question #9: Will each coupon have one cuting plane?Answer #9: Yes.The due date for receipt of offers is extended to May 14, 2009.Companies shall provide the information stated in the synopsis/RFQ posted on the NASAAcquisition Internet Service (NAIS) on April 27, 2009. Documents related to thisprocurement are available over the Internet. These documents reside on a World Wide Web(WWW) server which may be accessed using a WWW browser application. The Internet site, orURL, for the NASA/JSC Business Opportunities home page ishttp://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=73 NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (08-MAY-2009); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/spg/NASA/JSC/OPDC20220/NNJ09289547Q/listing.html)
- Record
- SN01812891-F 20090510/090509165821 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |