SOLICITATION NOTICE
65 -- ORAL SURGICAL IMPLANTS/INSTRUMENTS
- Notice Date
- 5/11/2009
- Notice Type
- Combine Synopsis/Solicitation
- NAICS
- 339114
— Dental Equipment and Supplies Manufacturing
- Contracting Office
- U. S. Naval Hospital Okinawa, Material Mgmt Dept PSC 482, Box 248 FPO AP 96362
- ZIP Code
- 96362
- Solicitation Number
- N684709132DFBA01
- Response Due
- 5/22/2009
- Point of Contact
- Hiro F Oshiro, PURCHASING AGENT, Phone 81-611-743-7412, Fax 01181-98-892-8575
- E-Mail Address
-
hiro.oshiro@med.navy.mil
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation prepared in accordance with FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This solicitation is issued as a request for quote (RFQ).This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-32. NAICS Code for this requirement is 339114. The U.S. Naval Hospital, Okinawa, Japan intends to negotiate a sole-source contract with KLS MARTIN L.P for implants/instruments used in oral surgical procedures under the authority of FAR Subpart 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirement. However, any firm that believes it can meet the requirements may give written notification to the Point of Contact (POC). Offerors responding to this notice must be FDA approved for the manufacture, sale and distribution of these products. Offerors must be authorized distributors of KLS MARTIN L.P. products. Contractor must be registered in Central Contractor Registration. [Note: Lack of registration in the Central Contractor Registration will make a Contractor ineligible for award] Registration is available via the Internet at www.ccr.gov. Shipping shall be direct to U.S. Naval Hospital, Okinawa, Japan. The requirements includes the following schedule of supplies: Line Item 0001 CENTRE- DRIVE MICRO SCREW 1.5MM X 5MM, P/N: 25-074-05 - 50 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0002 CENTRE- DRIVE MICRO SCREW 1.5MM X 7MM, P/N: 25-074-07 - 6 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0003 CENTRE - DRIVE MICRO SCREW 1.5MM X 9MM, P/N: 25-074-09 - 20 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0004 CENTRE - DRIVE MICRO SCREW 1.0MM X 2MM, P/N: 25-064-02 - 8 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0005 CENTRE - DRIVE MICRO SCREW 1.0MM X 3MM, P/N: 25-064-03 - 40 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0006 CENTRE - DRIVE MICRO SCREW 1.0MM X 4MM, P/N: 25-064-04 - 8 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0007 CENTRE - DRIVE MICRO SCREW 1.0MM X 6MM, P/N: 25-064-06 - 8 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0008 CENTRE - DRIVE MICRO SCREW 1.0MM X 7MM, P/N: 25-064-07 - 8 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0009 CENTRE - DRIVE MICRO SCREW 1.0MM X 5MM, P/N: 25-064-05 - 8 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0010 MICROPLATE L-SHAPE 100 R 3X2, P/N: 25-315-85 - 4 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0011 S/D BLADE 2.0/2.3MM X/D 40MM BOSS DRIVER, P/N: 50-815-20 - 2 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0012 FORCEPS ASCH SEPTUM STAIGHTENING 23CM, P/N: 37-725-23 - 1 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0013 ELEVATOR GILLES MALAR 24CM 91/2IN, P/N: 38-711-21 - 1 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0014 FORCEPS LUCAE BAYONET 14CM, 5-1/2IN, P/N: 36-391-14 - 1 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0015 SPECULUM NASAL MODIFIED VIENNA SML 14CM, P/N: 36-843-01 - 1 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0016 SPECULUM NASAL MODIFIED VIENNA LRG 14CM, P/N: 36-843-03 - 1 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0017 DRILL GUIDE SHORT UNIVERSAL TRANSBUCCAL, P/N: 50-501-26 - 1 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0018 TRAY 30CM X 30CM W/LID, P/N: 55-969-27 - 1 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0019 RACK ONLY 1.0MM LEVEL 1 COMBO INSERT/SCR, P/N: 55-962-01 - 1 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0020 CARTRIDGE LENGTH MEASURING FOR 1.5MM LEVEL, P/N: 25-650-02 - 1 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0021 RACK ONLY 2.0MM LEVEL 1 COMBO INSERT/SCR, P/N: 55-962-03 - 1 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0022 TRAY 15 X 30CM W/LID FOR BATTERY OP, P/N: 55-969-19 - 2 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0023 INSERT FOR BLADES USED WITH 55-969-19, P/N: 55-964-41 - 1 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0024 S/D HANDLE W/O BATTERY PACK F:120RPM, FF, P/N: 50-800-01 - 2 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0025 DRILL HANDLE W/O BATTERY PACK, ONE SPEED, P/N: 50-800-03 - 1 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0026 LEVEL ONE HOUSING, P/N: 55-961-31 - 1 EA - UNIT PRICE _________________, TOTAL PRICE___________________, Line Item 0027 S/D BLADE 1.5MM, X/D 58MM WIDE DIA 1.5MM, P/N: 25-432-97 - 2 EA - UNIT PRICE _________________, TOTAL PRICE___________________. The following provisions and clauses apply plus any addenda: FAR 52.212-1 Instructions to Offerors - Commercial Items; 52.212-2 Evaluation - Commercial Items; 52.212-3 Offeror Representations and Certifications --Commercial Items; 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items and 52.212-4 Contract Terms and Conditions - Commercial Items. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. 1) Past performance 2) Technical capability 3) Price. Past performance and technical capability when combined has more importance than price. Responses must be submitted to the POC no later than May 22, 2009; 12 PM; Japan Standard Time. Responses shall be submitted via e-mail in Word, Excel, or PDF format to the POC, Hiro Oshiro, at hiro.oshiro@med.navy.mil or faxed to 011-81-989-92-8575. Telephone inquiries or requests will not be accepted. Responses received will be evaluated; however, a determination by the Government not to compete the proposed procurement based upon responses to this notice is solely within the discretion of the Government. If no responses are received, U.S. Naval Hospital, Okinawa, Japan will proceed with the sole source procurement. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (11-MAY-2009); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
- Web Link
-
Link To Document
(https://www.fbo.gov/spg/DON/BUMED/N68470/N684709132DFBA01/listing.html)
- Place of Performance
- Address: SUPPLY OFFICER PSC 482 BOX 248 FPO, AP
- Zip Code: 96362-1695
- Country: JP
- Zip Code: 96362-1695
- Record
- SN01813976-F 20090513/090511233026 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |