Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF MAY 14, 2009 FBO #2726
SPECIAL NOTICE

80 -- ADHESIVE

Notice Date
5/12/2009
 
Notice Type
Synopsis
 
NAICS
325520 — Adhesive Manufacturing
 
Contracting Office
1500 East Bannister Road Kansas City MO 64131
 
ZIP Code
64131
 
Solicitation Number
8040-00-180-6199
 
Response Due
5/15/2009
 
Archive Date
5/16/2009
 
Point of Contact
Dana M Karlin, Phone 816-823-2300, Fax 816-823-2136
 
E-Mail Address
dana.karlin@gsa.gov
 
Small Business Set-Aside
N/A
 
Description
QTY:1 ROLL 8040-00-180-6199 UI: RO ADHESIVE : DESCRIPTION A modified epoxy-polyamide resin system on an unsupported film for bonding metals, structural plastic laminates, and composite structural plastic sandwiches. Service temperature range from -423 to 200 deg. F. Film wt.: 0.060 lb/sq ft Size: The product shall be furnished as a 750 sq ft roll with full roll-length release sheeting/strips on a rigid 2.0 to 3.0 inch diameter core. Further, each roll shall be factory-sealed in a vapor-tight, plastic bag, shrink-wrapped, or otherwise containerized and physically protected between cut-to-size, corrugated fiberboard (200 psi minimum burst strength) which is taped or otherwise fastened outboard of the roll. There will be no interaction chemically or physically with the contents which would damage the container or alter the strength, quality, or purity of the contents. The packaging shall be closed in a manner that will insure the contents will not spill from the containers during shipment, handling, storage, and redistribution. Shelf life code: 2 (6 months) Maximum age on delivery: 1 month Cytec-Fiberite Inc. part number FM-1000. ITEM MARKING Each item shall be marked with the following: (1) lot or batch number (2) shelf life monitoring data including dates of manufacture and reinspection or expiration. (3) manufacturer's name and part number (4) instructions for use, thinning, mixing, shaking, etc. (5) instructions for storage, i.e. do not freeze, requires refrigeration, etc. MARKING All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with the latest version of FED-STD-123, "Marking For Shipment (Civil Agencies)", or marked and bar coded for delivery to military activities in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://assist.daps.dla.mil/quicksearch/. South Coast Air Quality Management District Provision: If the item is on an existing contract, the supplier shall follow the pre-arranged California South Coast Air Quality Management District labeling requirements. PALLETIZATION Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free. Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight for shipments to Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (Sharpe). Stacking Strength: The pallet plus the load shall be capable of supporting two additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength. Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only. NOTICE OF REQUIREMENTS FOR SHIPMENT TO EUROPEAN UNION COUNTRIES: Per Clause D-FSS-468, non-manufactured wood pallets and other non-manufactured wood package material used in shipments destined for ultimate delivery to or through a European Union (EU) country shall comply with the Emergency Measures (2001/219/EC) adopted by the Commission of the European Communities (CEC). Additionally, shipments delivered to DoD distribution facilities or freight consolidation points for eventual delivery to or through EU countries shall comply with DLA PROCLTR 01-15. NOTE: THIS NOTICE WAS NOT POSTED TO FEDBIZOPPS ON THE DATE INDICATED IN THE NOTICE ITSELF (12-MAY-2009); HOWEVER, IT DID APPEAR IN THE FEDBIZOPPS FTP FEED ON THIS DATE. PLEASE CONTACT 877-472-3779 or fbo.support@gsa.gov REGARDING THIS ISSUE.
 
Web Link
Link To Document
(https://www.fbo.gov/spg/GSA/FSS/6FE/8040-00-180-6199/listing.html)
 
Record
SN01814720-F 20090514/090512233025 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.