SOLICITATION NOTICE
43 -- HYDRAULIC CYCLINDER
- Notice Date
- 5/22/2009
- Notice Type
- Presolicitation
- NAICS
- 333996
— Fluid Power Pump and Motor Manufacturing
- Contracting Office
- NASA/Glenn Research Center, 21000 Brookpark Road, Cleveland, OH 44135
- ZIP Code
- 44135
- Solicitation Number
- NNC09294373Q
- Response Due
- 6/12/2009
- Archive Date
- 5/22/2010
- Point of Contact
- Nancy M. Shumaker, Purchasing Agent, Phone 216-433-2133, Fax 216-433-2480, Email Nancy.M.Shumaker@nasa.gov<br />
- E-Mail Address
-
Nancy M. Shumaker
(Nancy.M.Shumaker@nasa.gov)
- Small Business Set-Aside
- Total Small Business
- Description
- NASA/GRC has a requirement for hydraulic cylinders in accordance to the followingspecifications:We have 34 cylinders that are up for replacement. 6 Cylinders - HorizontalWelded Cylinder for Bolting Purposes3 Bore4 Stroke1.25 Rod Diameter w/1-14 Thread Physical Package Size: 4 Diameter and 10 Height Working Fluid: Hydraulic DTE Lite4 Cylinders will have Maximum Temperature: 600F2 Cylinders will have Maximum Temperature: 300FSystem Operating Pressure: 1500psigBolting Face: 4x4 SquareBolt Pattern: 4-3/8 through holes space symmetrically at 2 7/8 square.Port Holes: 3/8 NPT Located on base and top28 Cylinders VerticalWelded Cylinder for Bolting Purposes3 Bore2.25 Stroke1.25 Rod Diameter w/1-14 Thread Physical Package Size: 4 Diameter and 8 Height Working Fluid: Hydraulic DTE Lite8 Cylinders will have Maximum Temperature: 600F20 Cylinders will have Maximum Temperature: 300FSystem Operating Pressure: 1500psigBolting Face: 4x4 SquareBolt Pattern: 4-3/8 through holes space symmetrically at 2 7/8 square.Port Holes: 3/8 NPT Located on base and topAn onsite visit or pictures are required to confirm application.Require approval of all prints once design is complete.NASA/GRC intends to purchase the items from Babson Fluid Power, Inc. due to theirexpertise in hydraulic cylinders and their use of Milwaukee cylinders as supplier. Design will be specific to current cylinders. Current manufacturer is out of businessand can no longer obtain direct replacements. Babson Fluid Power was very involved withutilizing design for 1x1 applications and obtaining the 600F temperature rating. Milwaukee Cylinder is the closest direct replacement cylinder for 1x1 mounting andinstallation clearances. They would be a direct swap with no other fabrication changesneeded. The Government intends to acquire a commercial item using FAR Part 12.Interested organizations may submit their capabilities and qualifications to perform theeffort in writing to the identified point of contact not later than 4:30 p.m. local timeon June 12,2009. Such capabilities/qualifications will be evaluated solely for thepurpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and opencompetition basis, based upon responses to this notice, is solely within the discretionof the government.Oral communications are not acceptable in response to this notice.All responsible sources may submit an offer which shall be considered by the agency.An Ombudsman has been appointed. See NASA Specific Note "B".Any referenced notes may be viewed at the following URLs linked below.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/NASA/GRC/OPDC20220/NNC09294373Q/listing.html)
- Record
- SN01826049-W 20090524/090522235023-0eab51dd21a51d099e8804f02eef50b2 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |