SOLICITATION NOTICE
70 -- Cisco Catalyst
- Notice Date
- 5/27/2009
- Notice Type
- Presolicitation
- Contracting Office
- Department of State, FedBid.com -- for Department of State procurements only., FedBid.com, 1701 N Fort Meyer Drive, Rosslyn, VA 22209
- ZIP Code
- 22209
- Solicitation Number
- 1019937023_01
- Response Due
- 5/29/2009
- Archive Date
- 11/25/2009
- Point of Contact
- Name: Felicia Goudy, Title: Contract Specialist, Phone: 7038755202, Fax:
- E-Mail Address
-
goudyfd@state.gov;
- Small Business Set-Aside
- N/A
- Description
- Bids are being solicited under solicitation number 1019937023_01. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as an invitation for bids (IFB), unless otherwise indicated herein. If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.FedBid.com and reference Buy No. 126461_01. NASA SEWP IV Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing NASA SEWP IV contract. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the FedBid Fee, for contract-specific items. If FedBid receives notice that, due to inclusion of the FedBid Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the FedBid Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective NASA SEWP IV contract AND upon approval from the soliciting Contracting officer. Information regarding NASA SEWP IV contracts is available at <http://www.sewp.nasa.gov>. The FedBid system will automatically calculate SEWP fees to the Seller bid. This is viewable on the Seller's bid confirmation page prior to submittal. This requirement is unrestricted and only qualified sellers may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2009-05-29 11:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be SPRINGFIELD, VA 22153 The Department of State requires the following items, Exact Match Only, to the following: LI 001, Cisco Catalyst 4500-Series 1000W AC Power Supply P/N: PWR-C45-1000AC=, 5, EA; LI 002, Cisco Catalyst 4500 Supervisor IV Module, (2) GBIC Slots, ConsoleP/N: WS-X4515=, 5, EA; LI 003, Cisco Catalyst 4500 Gigabit Ethernet Module, 6 ports (GBIC)P/N: WS-X4306-GB=, 9, EA; LI 004, Cisco Catalyst 4500 Enhanced 48-port 10/100/1000 Module (RJ-45)P/N: WS-X4548-GB-RJ45=, 6, EA; LI 005, Cisco Catalyst 4500 Gigabit Ethernet Module, 18-PortsP/N: WS-X4418-GB=, 6, EA; LI 006, Cisco 1000BASE-SX Short Wavelength GBIC (Multimode only)P/N: WS-G5484=, 300, EA; LI 007, Cisco Catalyst 3750-24FS-S Switch, (24) 100Base-FX MTRJ Ports + (2) SFP Ports; Includes (2) installed Cisco GLC-SX-MM= SFP Modules P/N: WS-C3750-24FS-S, 10, EA; For this solicitation, Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Department of State is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids. All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Sellers that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Sellers that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Sellers may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should Sellers require additional clarification, contact FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Agencies may require registration with the Central Contractor Registry (CCR) prior to receipt of order, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.ccr.gov. All Bids must be valid for 30 days from the closing date for this solicitation. No exceptions or qualifications. New equipment ONLY, NO remanufactured, refurbished, or gray-market products. All bid prices must include shipping FOB Destination CONUS (CONtinental U.S.). No partial shipments are permitted, unless otherwise specified by Contracting Officer at time of award. (a) The provider of information technology shall certify applications are fully functional and operate correctly as intended on systems using the Federal Desktop Core Configuration (FDCC). This includes Internet Explorer 7 configured to operate on Windows XP and Vista (in Protected Mode on Vista). For the Windows XP settings, see http://csrc.nist.gov/itsec/guidance_WinXP.html and for the Windows Vista settings, see: http://csrc.nist.gov/itsec/guidance_vista.html.(b) The standard installation, operation, maintenance, update, and/or patching of software shall not alter the configuration settings from the approved FDCC configuration. The information technology should also use the Windows Installer Service for installation to the default program files directory and should be able to silently install and uninstall.(c) Applications designed for normal end users shall run in the standard user context without elevated system administration privileges.(d) The Department of State currently intends to use Vista in Protected Mode in the future when all devices at all worldwide locations have sufficient capacity to permit an upgrade from the XP operating system. The Contractor and its employees shall exercise the utmost discretion in regard to all matters relating to their duties and functions. They shall not communicate to any person any information known to them by reason of their performance of services under this contract which has not been made public, except in the necessary performance of their duties or upon written authorization of the Contracting Officer. All documents and records (including photographs) generated during the performance of work under this contract shall be for the sole use and become the exclusive property of the U.S Government. Furthermore, no article, book, pamphlet, email, recording, broadcast, speech television appearance, film or photograph concerning any aspect of work performed under this contract shall be published or disseminated through any media without the prior written authorization of the Contracting Officer. These obligations do no cease upon the expiration or termination of this contract. The Contractor shall include the substance of this provision in all contracts of employment and in all subcontracts hereunder. eScore vendor configuration data worksheet (attached) for the following equipment must be received PRIOR to delivery: Line Item 6 : Cisco Catalyst WS-C3750-24FS-S SwitchAt the time equipment is delivered, vendors are required to complete the Vendor Deliverable Spreadsheet, E-Score Master. This spreadsheet will be used to populate the Departments E-Score Database. The spreadsheet must be received prior to delivery of equipment. Failure to deliver the spreadsheet prior to shipment will result in a rejection of equipment at the dock. Failure to deliver the spreadsheet will result in a monetary penalty. Submission of incomplete configuration data will result in a delay of payment for which the vendor is responsible. The E-Score Master may be obtained by calling Dawn Cavallo at (703-970-2117). Invoice will NOT be paid until full reconciliation of E-Score and shipment has occurred. Weight is a consideration for all items due to government shipping related costs. Shipping hours are 7:00 AM 3:00 PM, Monday thru Wednesday Driver must call Robert Hall (703-970-2123) for Dock Appointment prior to delivery of shipment. Shipments without Dock appointments may be refused at the door. Obligation number (1019-number) must be clearly written on each box. A packing slip must be included with each shipment. Packing slips must be marked with the Purchase Order Number (1019-number) Packing slips/Bill of Lading must contain pallet and box count. Shipping Address:oU.S. Department of Stateoc/o ManTecho8020 Grainger Ct., Springfield, VA 22153 Software licenses and key codes to sent to Dawn Cavallo at CavalloDM@state.gov (703-970-2117) via email (including 1019-number in subject line). Pallet height not to exceed 62-inches. Wrapped pallet dimensions: 40x48x62 All pallets must be marked with the requisition order number (1019-number) Pallets must be wood, with standard 3-stringer construction, with 4-way entry. Pallet size should be 40" X 48" with 48" being the stringer length All boxes and containers must be clearly marked with the requisition reference number found in Block 4, of DoS Form 347, Order for Suppliers and Services. Shipping documents will clearly list each item and the quantity shipped as contained within boxes or containers. If single line items have been assembled into a major component, shipping documents must account for the individual items shipped within the major component. Requisition Number (1019-number) must be clearly printed on all boxes Part number with barcode must be clearly printed on container Serial number with barcode must be clear printed on container (if applicable) If equipment is modified, a new Part Number must be assigned and bar-coded on the container. If equipment is modified, the original Part Number and barcode should not be covered on the container. If a new Serial Number is assigned, it must be bar-coded on the container. The Vendor may not substitute any item listed on this order without prior written approval by the Contracting Officer. No other individual is authorized, either verbally or in writing to change part numbers, manufacturers, quantities, delivery dates or any other specification of this award. Items that do not conform to descriptions and part numbers found in Block 17 will be rejected at the time of delivery causing a return at the Vendors expense. Items received must adhere to the configuration as submitted and approved by the PMA Lab. PMA Lab configuration control numbers for approved configurations will be assigned. Vendors must deliver to the locked configuration as tested and approved. Items not in compliance will be returned to the Vendor at no additional cost to the Department of State and comments will be noted to Vendor Performance. Random Quality Assurance will be conducted to ensure Vendor/Manufacturer conformance. GITM does NOT allow use of third party components in configurations. Random QA will be performed. If it is determined third party components were used, and warranties are compromised, Vendor will assume cost to replace said item at no additional cost to the Department of State. The infraction will be recorded in the Vendor s Performance file. World wide manufacturer warranty for parts and labor on all components. Vendor pickup & delivery at 8020 Grainger Ct., Springfield, VA 22153 for warranty returns provided at no additional cost, within 3 business days of notification Repaired units must be returned to GITM within 30 days. 120-Day Lead-time for retuning a defective item from post. If award is made to a value-add reseller, the reseller will liaison with the manufacturer for any warranty repairs/concerns. Vendor will provide a written escalation process upon award to include the following information: Sales Contacts: both Field and inside Sales Management Contacts Customer Support Reps and their Management to include:Customer Service Representative Warranty Liaison Representative Integration RepresentativePlease provide name, phone, email, and back-up person in each area of responsibility. GITM would also like the vendor to provide an estimated time of response and plan for escalation to the next level. For brand name purchases under GSA schedule contracts the program office need only document for the contracting file, why a brand name is desired. This specific justification is subject to the approval of the Contracting Officer, and even if approved, the CO is not relieved of the requirement to compare prices among GSA schedule contractors for the brand name specified. A) If Seller is offering Cisco Brand product, they affirm the following: B)The products offered in this bid are brand new, not gray market and are in original packaging. C) Seller is providing these products via Cisco authorized channels for new equipment Federal sales. D) Full Cisco warranties will be provided and none of these products will have a negative impact on the warranties of associated system components.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/State/FedBid.com/FedBid1/1019937023_01/listing.html)
- Place of Performance
- Address: SPRINGFIELD, VA 22153<br />
- Zip Code: 22153<br />
- Zip Code: 22153<br />
- Record
- SN01828215-W 20090529/090527235405-18d48462526a3e7e79319557df75345e (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |