MODIFICATION
13 -- FMU-164/B Bomb Fuze - DRAFT RFP
- Notice Date
- 6/1/2009
- Notice Type
- Modification/Amendment
- NAICS
- 332995
— Other Ordnance and Accessories Manufacturing
- Contracting Office
- Department of the Navy, Naval Air Systems Command, NAVAIR HQ, Building 2272, 47123 Buse Road Unit IPT, Patuxent River, Maryland, 20670, United States
- ZIP Code
- 20670
- Solicitation Number
- N00019-09-R-0215
- Response Due
- 3/31/2010
- Point of Contact
- Christine F Marshall, Phone: (301) 757-7052, Christopher T. Kovack, Phone: 301-757-5949
- E-Mail Address
-
christine.marshall@navy.mil, christopher.kovack@navy.mil
(christine.marshall@navy.mil, christopher.kovack@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- DRAFT RFP The Naval Air Systems Command Conventional Strike Weapons Program Office (PMA-201) intends to procure on a competitive basis the FMU-164/B, Electronic Bomb Fuze. This competition is anticipated to be a full and open competition using the BEST VALUE Source Selection approach to select the most advantageous offer based on both non-price factors as well as price factors. A draft solicitation/RFP is being posted to the NAVAIR homepage. The NAVAIR homepage is located at http://www.navair.navy.mil. The solicitation number is N00019-09-R-0215. No telephone requests for the DRAFT solicitation will be accepted, no written requests will be accepted and no hard copies will be mailed. To find the draft solicitation/RFP you must select ‘Doing Business with Us’ and then ‘Open Solicitations’ or call the help desk at (301) 342-4686 if you are in need of further assistance. Except as noted here, the Government will only release the draft solicitation/RFP, including any subsequent amendments, over the Internet. Only Draft Attachments (1) and (2) will be available for review. Any amendments issued will be posted on the same NAVAIR web page. After the draft solicitation release, vendors should regularly access the website to ensure they have all amendments. Failure to obtain any posted amendments and to respond to each of them prior to the date and time set for receipt of offers may render your offer non-responsive. A competitive performance-based specification solicitation for FMU-164/B is anticipated for release in the 4th quarter of FY09. A Best Value source selection is planned. Interested parties should check this web site periodically for updated information. RELEASE OF TECHNICAL DATA PACKAGE INFORMATION: This program includes information that has been designated a “Distribution D” and is only releasable to current and approved Department of Defense (DoD) contractors. In addition, the program requires a procurement effort in certain critical technologies/data that are not releasable to foreign firms. Some documents are under Federal export control for “sensitive” or “controlled” technologies regulated by the U.S. Department of State’s International Traffic in Arms Regulations (ITAR) protecting national security. Data may not be exported without an approval, authorization, or license under E.O. 12470 or the Arms Export Control Act. As such, the documents contain data whose export/transfer/disclosure is restricted by U.S. law and dissemination to non-U.S. persons whether in the United States or abroad requires an export license or other authorization. Disclosure of the control drawings requires the verification of a current license for the oral, visual or documentary disclose of technical data by U.S. persons to foreign persons as defined under the U.S. Department of State website, http://pmdtc.org/licenses.htm. To participate in this program, all firms must acknowledge their responsibility under the Arms Export Control Act. A foreign firm may be required to team with a U.S. firm that possesses a current and valid U.S. facility clearance with technologies/data safeguarding capabilities, inclusive of the authority to receive critical technology and/or data required to execute this program. Any resultant contractor teaming or license agreements between U.S. firms and foreign firms, to include employment of foreign nationals by U.S. firms, shall be in accordance with current U.S. export laws, security requirements, and National Disclosure Policy and shall require the prior approval of the contracting officer and foreign disclosure officer. It is the contractor’s responsibility to provide evidence of any such agreement and/or license to this office for review and this shall be verified prior to release of any controlled documents. Prior to release of any control document under this draft solicitation, the contractor must acknowledge its responsibilities under U.S. export control laws and regulations (including the obligation, under certain circumstances, to obtain an export license prior to the release of technical data within or outside the United States) and agree that it will not disseminate any export-controlled technical data subject to this requirement in a manner that would violate applicable export control laws and regulations. It is the responsibility of the contractor to provide this certification and/or proof of a current approval, authorization, or license under E.O. 12470 or the Arms Export Control Act. Upon verification of your status and acknowledgement, the requested documents will be provided. As such, Draft Attachment Numbers (1) and (2) associated with the solicitation will NOT be posted with the DRAFT RFP and must be obtained through this office. Interested Firms shall submit a written request for the attachments to both Christine Marshall at: christine.marshall@navy.mil and LCDR Chris Kovack at christopher.kovack@navy.mil. Companies must officially request the controlled documents in writing. To validate the controlled document release, this request must include the potential offerors company name, mailing address, email address (if available), point of contact, phone number, current CAGE number, Central Contractor Registration number and proof of current security authorization. In addition, the written request must include acknowledgement of the contractor’s responsibility under the U.S. export contract laws and regulations. For any foreign firm, the request must include proof of a current and applicable approval, authorization, or license under E.O. 12470 or the Arms Export Control Act if applicable. Upon verification of your status and acknowledgement, the requested documents will be provided. NAVAIR welcomes all comments and questions to the DRAFT solicitation/RFP and released attachments. All comments and questions must be submitted to the undersigned by close of business 19 June 2009. Any questions about this announcement shall be submitted to Christine Marshall: christine.marshall@navy.mil, LCDR Chris Kovack at christopher.kovack@navy.mil and Tracy Medford: tracy.medford@navy.mil at Naval Air Systems Command, Building 2272, Room 256, 47123 Buse Road, Unit IPT, Attn: Christine Marshall or LCDR Chris Kovack, AIR-2.4.4.3, Patuxent River, MD 20670-1547.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVAIR/N00019/N00019-09-R-0215/listing.html)
- Place of Performance
- Address: Naval Air Systems Command (NAVAIR), NAS Patuxent River, NAS Patuxent River, Maryland, 20653, United States
- Zip Code: 20653
- Zip Code: 20653
- Record
- SN01831972-W 20090603/090601234423-8fc73a343d8380eae6f5a0fb4721edd3 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |