SOURCES SOUGHT
J -- Sources Sought for the Emergency Drydock and Repairs to the USCGC Bayberry (WLI-65400)
- Notice Date
- 6/2/2009
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102
- ZIP Code
- 23510-9102
- Solicitation Number
- 061509-DD
- Archive Date
- 6/11/2010
- Point of Contact
- Tomeka Evans, Phone: 757-628-4666, Mildred A Anderson, Phone: (757)628-4637
- E-Mail Address
-
tomeka.evans@uscg.mil, mildred.a.FIGUEREO@uscg.mil
(tomeka.evans@uscg.mil, mildred.a.FIGUEREO@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- The U.S. Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns, Service-Disabled Veteran-Owned Small Business concerns (SDVOSB), or for Small Businesses. The estimated value of this procurement is between $100,000.00 and $250,000.00. The small business size standard for NAICS 336611 is less than 1,000 employees. The acquisition is to perform emergency dockside repairs to the USCGC Bayberry (WLI-65400), a 65 foot inland buoy tender. The homeport of the vessel is Caswell Beach, North Carolina. The performance period is twenty-one (21) calendar days and is expected to begin on or about June 15, 2009. The vessel’s availability will be geographically restricted to an area no greater than 400 nautical miles from the cutter’s homeport and no open water transits. The scope of the acquisition is for the overhauling, renewing and repairing of various items aboard the USCGC Bayberry (WLI-65400). This work may include, but is not limited to: remove, inspect, and reinstall propellers; repair and recondition propellers; remove, inspect, and reinstall propeller shafts; fabricate propeller shaft; straighten propeller shaft; renew water lubricated shaft bearings; fabricate rudders; remove and inspect rudder stock; install rudder assemblies; fabricate rudder stock; preserve underwater body – “Partial”, routine drydocking; provide temporary logistics; composite labor; GFP report; and laydays. All welding and brazing shall be accomplished by trained welders, who have been certified by the applicable regulatory code performance qualification procedures. In accordance with FAR 19.1305 and FAR 19.1405, if your firm is HUBZone certified or a Service-Disabled Veteran-Owned Small Business and intends to submit an offer on this acquisition, please respond in a letter either by e-mail to tomeka.evans@uscg.mil or by fax at (757) 628-4676. In your response you must include (a) a positive statement of your intention to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and telephone numbers. At least two references are requested, but more are desirable. Your response is required by June 4, 2009 at 9:00 am, EST. Contractors are reminded that should this acquisition become a HubZone set aside, FAR 52.219-3, Notice of Total HubZone Set-aside, will apply, which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern. Contractors are reminded that should this acquisition become a Service Disabled Veteran-Owned Small Business Set-Aside, FAR 52.219-27, Notice of Total Service Disabled Veteran-Owned Small Business Set-Aside, will apply, which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone, Service Disabled Veteran-Owned Small Business set aside, or Small Business set-aside. Failure to submit all information requested may result in an unrestricted acquisition. A decision on whether this will be pursued as a HUBZone, SDVOSB set-aside, or small business set-aside, will be posted in the Fedbizopps website at http://www.fedbizopps.gov. Questions may be referred to Ms. Tomeka Evans at (757) 628-4666.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/061509-DD/listing.html)
- Place of Performance
- Address: The place of performance will be at the contractor's facility, United States
- Record
- SN01833494-W 20090604/090602235306-adf9c2d02f22c57708adffc604e42688 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |