SOLICITATION NOTICE
81 -- Various Sized Corrugated Fiberboard Shipping Boxes
- Notice Date
- 6/15/2009
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 322211
— Corrugated and Solid Fiber Box Manufacturing
- Contracting Office
- Defense Logistics Agency, DLA Acquisition Locations, Defense Distribution Center, 2001 Mission Drive, DDC CSS-AB, Bldg 404, New Cumberland, Pennsylvania, 17070-5001, United States
- ZIP Code
- 17070-5001
- Solicitation Number
- SP3300-09-Q-0043
- Point of Contact
- Laura A. Dodson, Phone: 7177705516
- E-Mail Address
-
laura.dodson@dla.mil
(laura.dodson@dla.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- The Defense Distribution Depot San Joaquin, Tracy, CA (DDJC) has a requirement for various sizes of domestic corrugated fiberboard shipping boxes. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 in conjunction with 13.5 of the Federal Acquisition Regulations (FAR) as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. This is a Request for Quote (RFQ) and the solicitation number is SP3300-09-Q-0043. This notice incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2005-32 effective 14 May 2009 and Defense Federal Acquisition Regulation Supplement (DFARS) DCN 20090115 edition and Defense Logistics Acquisition Directive (DLAD) Current to Revision 5 and PROCLTR 2009-17 & 18. The complete text of any of the clauses and provisions may be accessed in full text at http://farsite.hill.af.mil. This acquisition is 100% set-aside for small business concerns. The NAICS code applicable to this acquisition is 322211 and the small business size standard is 500 employees. The requirement consists of the following: CLIN 0001 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 12 INCH LONG X 12 INCH WIDE X 12 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L962482. 26 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0002 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 8 INCH LONG X 8 INCH WIDE X 8 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 PUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M-90 SECTION 8 APPLIES. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L980014. 623 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0003 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, DOUBLE WALL, REGULAR SLOTTED CARTON, SIZE: 16 INCH LONG X 12 INCH WIDE X 8 INCH DEEP, 350 POUNDS PER SQUARE INCH BURSTING STRENGTH. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 15 EACH PER BUNDLE. STOCK NUMBER 811500L02004. 427 BUNDLES @ $_______________ = $_______________ TOTAL CLIN 0004 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 20 INCH LONG X 15-1/2 INCH WIDE X 9-1/2 INCH DEEP. FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 8115006094165. 262 BUNDLES @ $_______________ = $_______________ TOTAL CLIN 0005 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 20 INCH LONG X 20 INCH WIDE X 20 INCH DEEP. FOUR FLAPS ON TOPAND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER MATERIAL. ASTM D5118/D5118 M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L980013. 47 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0006 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, FULL OVERFLAP SLOTTED CARTON, SIZE: 38 INCH LONG X 40 INCH WIDE X 4 INCH DEEP. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGE APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 8115001491546. 18 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0007 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, FULL OVERFLAP SLOTTED CARTON, SIZE: 50 INCH LONG X 8 INCH WIDE X 8 INCH DEEP. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGE APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L100634. 33 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0008 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 20 INCH LONG X 15-1/2 INCH WIDE X 13-1/2 INCH DEEP. FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L020041. 181 BUNDLES @ $_______________ = $_______________ TOTAL CLIN 0009 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 14 INCH LONG X 14 INCH WIDE X 8 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L020044. 3 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0010 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 32 INCH LONG X 8 INCH WIDE X 8 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 200 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 65 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L020034. 3 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0011 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 24 INCH LONG X 8 INCH WIDE X 8 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 200 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 65 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L020033. 3 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0012 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 36 INCH LONG X 20 INCH WIDE X 15 INCH DEEP 200 POUNDS PER SQUARE INCH BURSTING STRENGTH. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L020059. 225 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0013 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, FULL OVERFLAP SLOTTED CARTON, SIZE: 48 INCH LONG X 4 INCH WIDE X 4 INCH DEEP. 200 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 65 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L020024. 3 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0014 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, FULL OVERFLAP SLOTTED CARTON, SIZE: 36 INCH LONG X 6 INCH WIDE X 6 INCH DEEP. 200 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 65 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L020030. 3 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0015 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 40 INCH LONG X 15 INCH WIDE X 7 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L1006353. 9 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0016 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, FULL OVERFLAP SLOTTED CARTON, SIZE: 50 INCH LONG X 4 INCH WIDE X 4 INCH DEEP. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 65 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L000860. 45 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0017 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 24 INCH LONG X 24 INCH WIDE X 12 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 15 EACH PER BUNDLE. STOCK NUMBER 811500L020047. 22 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0018 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 24 INCH LONG X 24 INCH WIDE X 6 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 8115006094164. 31 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0019 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 14 INCH LONG X 14 INCH WIDE X 14 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 8115001179525. 58 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0020 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGEL WALL, FULL TELESCOPE CARTON, SIZE: 37 ½ INCH LONG X 23 ½ INCH WIDE X 18 INCH DEEP. KNOCKED DOWN IN ACCORDANCE WITH ASTM D5118/D5118, AND CURRENT CHANGES. EACH BUNDLE UNIT SHALL CONTAIN 25 TOPS AND 25 BOTTOMS. FIBERBOARD WILL BE DOUBLE FACED, 275 POUNDS PER SQUARE INCH. MUST CONTAIN 25 TO 50 PERCENT POSTCONSUMER AND RECOVERED FIBER. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. CONTRACTOR SHALL IDENTIFY “TOPS AND BOTTOMS” STOCK NUMBER 8115001288024. 325 EACH @ $___________________EACH = $__________________TOTAL CLIN 0021 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGEL WALL, FULL TELESCOPE CARTON, SIZE: 47 ½ INCH LONG X 39 ½ INCH WIDE X 19 INCH DEEP. KNOCKED DOWN IN ACCORDANCE WITH ASTM D5118/D5118, AND CURRENT CHANGES. EACH BUNDLE UNIT SHALL CONTAIN 25 TOPS AND 25 BOTTOMS. FIBERBOARD WILL BE DOUBLE FACED, 275 POUNDS PER SQUARE INCH. MUST CONTAIN 25 TO 50 PERCENT POSTCONSUMER AND RECOVERED FIBER. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. CONTRACTOR SHALL IDENTIFY “TOPS AND BOTTOMS” STOCK NUMBER 8115001491537. 350 EA @ $___________________EACH = $__________________TOTAL CLIN 0022 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 36 INCH LONG X 8 INCH WIDE X 8 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 200 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 65 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L020035. 21 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0023 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 27 INCH LONG X 17 INCH WIDE X 14 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 8115006094287. 141BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL NOTE: REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET. Delivery point is FOB DESTINATION to Defense Distribution Depot San Joaquin, Supply Branch, Whse 21, Sec 4, 25600 Chrisman Rd., Tracy, CA 95304. Any award resulting from this solicitation will be issued on a Standard Form (SF) 1449. Payment for supplies under this order will be made by the Acquisition Operations Office via the Government Purchase Card (VISA). NOTE: Since all payments under this purchase order will be made via the Government Purchase Card, the Contractor must accept the VISA Credit Card for payment of all supplies ordered under this purchase order. The following FAR and DFARS clauses and provisions apply to this acquisition: FAR 52.212-1 Instructions to Offers-Commercial Items. Addenda to 52.212-1; the following paragraphs are hereby deleted from this provision: (d) products samples, (e) multiple offers and (h) multiple awards. NOTE: To receive an award resulting from this solicitation, offerors MUST be registered in the Central Contractor Registration (CCR) database IAW FAR 52.212-1(k) and DFARS 204.1104. Registration may be done on line at: www.ccr.gov. DLAD 52.233-9000 AGENCY PROTESTS (SEP 1999) Companies protesting this procurement may file a protest 1) with the Contracting Officer, 2) with the General Accounting Office, or 3) pursuant to Executive Order No. 12979, with the Agency for a decision by the Activity’s Chief of the Contracting Office. Protests filed with the agency should clearly state that they are an “Agency Level Protest under Executive Order No. 12979.” (Note: DLA procedures for Agency Level Protests filed under Executive Order No. 12979 allow for a higher level decision on the initial protest than would occur with a protest to the Contracting Officer; this is not an appellate review of a Contracting Officer’s decision on a protest previously filed with the Contracting Officer). Absent a clear indication of the intent to file an agency level protest, protests will be presumed to be protests to the Contracting Officer. (End of Provision) DLAD 52.233-9001 DISPUTES: AGREEMENT TO USE ALTERNATIVE DISPUTE RESOLUTION (ADR) (JUN 2001) (a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute. (b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.233-1, or for the agency, by the Contracting Officer, and approved at a level above the Contracting Officer after consultation with the ADR Specialist and with legal counsel (see DLA Directive 5145.1). Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the Contracting Officer before determining ADR to be inappropriate. (c) If you wish to opt out of this clause, check here ( ). Alternate wording may be negotiated with the Contracting Officer. (End of Provision) OFFER SUBMISSION INSTRUCTIONS–Quotes must include the following items. Submission of a quote that does not contain all items requested below may result in elimination from consideration for award. 1. Quotations may be submitted in contractor format and shall include: (1) Company name, address, telephone number, e-mail address, and FAX number; (2) Solicitation number; (3) Unit Price and extended prices for all CLINS; (4) Contractor DUNS Number and Commercial and Government Entity (CAGE) Code, (5) Signed acknowledgements of amendments (applicable only if any amendments are issued against this solicitation) 2. Contractors are required to include a copy of the FAR provision 52.212-3-Offeror Representations and Certifications-Commercial Items and DFAR 252.212-7000-Offeror Representation and Certification-Commercial Items with its proposal or may indicate completion of the representations and certifications on the internet at http://orca.bpn.gov. Failure to include the certifications along with the price proposal or to complete the certifications on the internet may result in elimination from consideration for award. FAR 13-106-2 Evaluation of Quotations or Offers - The Government intends to evaluate quotes in response to this quotation and will award one firm-fixed price contract to the responsible offeror whose quote represents the total overall lowest price for all CLINS. Therefore to be considered for award, a quote must be provided for all CLINS. FAR 52.212-4 Contract Terms and Conditions–Commercial Items. Addenda to 52.212-4; the following clauses apply: FAR 52.223-4 Recovered Material Certification FAR 52.247-34 FOB Destination 52.211-9 – DESIRED AND REQUIRED TIME OF DELIVERY (JUN 1997) (a) The Government desires delivery to be made according to the following schedule: DESIRED DELIVERY SCHEDULE – All items within 14 days after date of contract award. If the offeror is unable to meet the desired delivery schedule, it may, without prejudicing evaluation of its offer, propose a delivery schedule below. However, the offeror’s proposed delivery schedule must not extend the delivery period beyond the time for delivery in the Government’s required delivery schedule as follows: REQUIRED DELIVERY SCHEDULE – All items within 21 days after date of contract award. Offers that propose delivery of a quantity under such terms or conditions that delivery will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. If the offeror proposes no other delivery schedule, the desired delivery schedule above will apply. OFFEROR'S PROPOSED DELIVERY SCHEDULE: All items with _____ days after date of contract award. (b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed or otherwise furnished to the successful offeror results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day the award is dated. Therefore, the offeror shall compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor’s date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term “working day” excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected. (End of Clause) 52.211-16–VARIATION IN QUANTITY (APR 1984) (a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) below. (b) The permissible variation shall be limited to: 10 Percent increase 10 Percent decrease This increase or decrease shall apply to the total quantity of each CLIN. (End of Clause) FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes of Executive Orders–Commercial Items (in paragraph (b) the following clauses apply: FAR 52.219-6 Notice of Total Small Business Set-Aside FAR 52.219-28 Post Award Small Business Program Rerepresentation FAR 52.222-3 Convict Labor FAR 52.222-19 Child Labor–Cooperation with Authorities and Remedies FAR 52.222-21 Prohibition of segregated facilities FAR 52.222-26 Equal Opportunity FAR 52.222-36 Affirmative Action for Workers with Disabilities FAR 52.222-50 Combating Trafficking in Persons FAR 52.225-13 Restriction on Certain Foreign Purchases FAR 52.232-36 Payments by Third Party DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. The following additional clauses/provisions apply: DFARS 252.225-7036 Buy American Act–Free Trade Agreement–Balance of Payments Program ALT I DFARS 252.247-7023 Transportation of Supplies by Sea DLAD 52.247-9012 REQUIREMENTS FOR TREATMENT OF WOOD PACKAGING MATERIAL (WPM) (FEB 2007) (a) This clause only applies when wood packaging material (WPM) will be used to make shipments under this contract and/or when WPM is being acquired under this contract. (b) Definition. Wood packaging material (WPM) means wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. The definition excludes materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). (c) All Wood Packaging Material(WPM) used to make shipments under DOD contracts and/or acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo. (1) All WPM shall comply with the official quality control program for heat treatment (HT) or kiln dried heat treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/). (2) All WPM shall include certification/quality markings in accordance with the ALSC standard. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible. All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. (d) Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government. (End of Clause) Offerors responding to this announcement shall submit their quotations via FAX to Laura Dodson, 717-770-7591 or e-mail to laura.dodson@dla.mil All quotes must be received by 30 June, 2009 AT 3:00 PM EST to be considered for award.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DDC/SP3300-09-Q-0043/listing.html)
- Record
- SN01845661-W 20090617/090615235746-28421e4b1570b2941c5a55ca53cd876c (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |