SOURCES SOUGHT
Y -- F-22 Radar Cross Section Test Facility, Hill AFB, Utah
- Notice Date
- 6/22/2009
- Notice Type
- Sources Sought
- NAICS
- 236220
— Commercial and Institutional Building Construction
- Contracting Office
- Department of the Army, U.S. Army Corps of Engineers, US Army Engineer District, Sacramento, US Army Engineer District, Sacramento, 1325 J. Street, Sacramento, CA 95814
- ZIP Code
- 95814
- Solicitation Number
- W91238-09-S-9173
- Response Due
- 7/13/2009
- Archive Date
- 9/11/2009
- Point of Contact
- Connie L Newell, 916-557-5229<br />
- E-Mail Address
-
US Army Engineer District, Sacramento
(connie.l.newell@usace.army.mil)
- Small Business Set-Aside
- N/A
- Description
- This is a SOURCES SOUGHT NOTICE for a Market Research ONLY to determine the availability of potential small business categories, for potential small business set-aside. NO AWARD will be made from this Sources Sought. NO SOLICITATION, SPECIFICATIONS, OR DRAWINGS ARE AVAILABLE AT THIS TIME; therefore, do NOT request a copy of a solicitation. Potential offerors having the skill, capabilities and bonding necessary to perform the described project are invited to provide feedback via email at Connie.L.Newell@usace.army.mil. All responses will be used to determine the appropriate acquisition strategy for a potential future acquisition. Particularly, the purpose of this NOTICE is to gain knowledge of potential small business sources in the following categories: Small Business, Certified 8a, Certified HUB Zone, and Service-Disabled Veteran-Owned Small Business (SDVOSB), for Design-Build of a New High Bay Industrial F-22 Radar Cross Section Test Facility, Hill AFB, UT. The capabilities will be evaluated solely for the purpose of determining to Set-Aside for the Small Business Community or to conduct as an Unrestricted Procurement. Other than small businesses may respond to this NOTICE in the event the market does not indicate SB interest, however, preference will be given to the SB categories listed above. The government must ensure there is adequate competition among the potential pool of available contractors. This project is planned for advertising in late July 2009. The estimated cost range according to the DFARS 236.204 is between $ 10,000,000 to $ 25,000,000. The NAICS Code is 236220, the size standard is $ 33.5 million (average annual receipts for preceding three fiscal years), and the Federal Supply Code is Y123, Airfield Radar Facilities. The duration of the project is To Be Determined. Under Federal Acquisition Regulation (FAR) guidelines, the concern will perform at least 15% of the cost of the contract, not including the cost of materials, with its own employees. Under FAR 52.236-1 the contractor shall perform on the site, and with its own organization work equivalent to at least 20% of the total amount of work to be performed under the contract. PROJECT DESCRIPTION Project will be Design-Build of a New High Bay industrial Radar Cross Section Test facility (4,629 SM). Construction will be a specialized testing hanger, with unique radar reflective interior surface coatings, water cannon/wet-pipe sprinkler combination system to be custom designed/approved, aircraft turntable w/pit and other unusual design/construction features to include a concrete foundation/floor slab, structural steel frame with insulated wall/roof paneling system. Project includes aircraft vestibule, radar inspection bay, control room, restrooms, lightning protections fire protection/detection and IDS. Exterior includes necessary utility/infrastructure support, pavements, site improvements and comm. support. The project includes development of design deliverables for review (2 submittals plus back check processes), sustainable design using LEEDs rating system (Silver certifiable), anti-terrorism/force protection (will be met by compliance with the RFP requirements), design deliverables for construction, grading, relocation/protection of utilities, utility service, site improvements, connections/runs, interior/exterior finishes, exterior lighting, parking, signage, and all necessary features (interior and exterior) to yield a safe, complete, and useable facility. The Design portion must be accomplished by qualified, experienced, professional A-E multi-discipline firms. These A-E firms must be capable of: design analysis, planning, development, CADD, professional services, pre-design site-assessment, feasibility and concept studies, design, geotechnical investigations and reports, environmental investigations, studies, and reports, abatement and sampling, construction documentation, cost estimates, value engineering, life cycle costing, post design-shop drawing review, construction phase services, and construction administration. Additional services include but are not limited to: seismic design, topographic and boundary surveys to include mapping and analysis (including data collection and verification), historical and cultural resource investigations, design review, seismic analysis, design construction cost reconciliation, environmental testing, statement of work review, site surveys and evaluations, remediation design, and Environmental Protection Agency (EPA) compliance for hazardous materials such as petroleum products, automotive chemicals, asbestos, lead and radon. The contractor is also required to have expertise and knowledge of the design of Anti-Terrorism/Force Protection (AT/FP) requirements, security and communications systems, fire protection and life safety systems, and other technical services as may be required. All work must be performed by or under the direct supervision of licensed professional Architects or Engineers. AE disciplines required to comply with the above requirements include but are limited to, registered architect, registered civil engineer, registered electrical engineer, registered mechanical engineer, registered structural engineer, registered fire protection engineer, registered geo-technical (registered civil maybe acceptable if certified), registered environmental (registered civil maybe acceptable if certified), interior designer, landscape architect, community planner, certified environmental survey/design personnel, construction management CAPABILITY STATEMENT The following requests are designed to apprise the US Army Corps of Engineers, Sacramento District, of any prospective construction contractors project execution capabilities. Please provide your response to the following. The submission is limited to 20 pages. 1) Offerors name, address, point of contact, phone number, and e-mail address. 2) Offerors interest in bidding on the solicitation when it is issued. 3) Offerors capability to perform a contract of this magnitude and complexity and comparable work performed within the past 5 years brief description of the project, customer name, timeliness of performance, customer satisfaction, and dollar value of the project) provide at least 3 examples. 4) Offerors type of small business and Business Size (Small Business, HUBZone, Service Disabled Veteran Owned and/or Small Business, 8(a)) 5) Offerors Joint Venture information if applicable existing and potential 6) Offerors Bonding Capability in the form of a letter from Surety The Capabilities Statement for this sources sought is not expected to be a Request for Proposal or Invitation for Bid, nor does it restrict the Government to an ultimate acquisition approach, but rather short statements regarding the companys ability to demonstrate existing-or-developed expertise and experience in relation to the areas specified herein. Any commercial brochures or currently existing marketing material may also be submitted with the Capabilities statement. Submission of Capabilities statement is not a prerequisite to any potential future offerings, but participation will assist the Corps of Engineers in tailoring requirements to be consistent with industry capabilities. This synopsis is for information and planning purposes only and is neither to be construed as a commitment by the Government nor will the Government pay for information solicited. Respondents will not be notified of the results of the evaluation. After completing its analysis, the Government will determine whether to limit competition among 8(a), Service Disabled Veteran, HubZone, or all Small Business firms or proceed with full and open competition as Unrestricted. Offers that do not meet all requirements or submit within the allotted time will not be considered. All interested contractors should notify this office in writing by EMAIL or mail by 5:00 PM Pacific Time on July 13, 2009. Submit response and information: via EMAIL to: Connie.L.Newell@usace.army.mil or via Mail to: Connie Newell, CESPK CT-A, Room. 878, US Army Corps of Engineers, Sacramento District, 1325 J Street, Sacramento, CA 95814.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA05/W91238-09-S-9173/listing.html)
- Place of Performance
- Address: U.S. Air Force Bldg 366 Hill AFB UT<br />
- Zip Code: 84056<br />
- Zip Code: 84056<br />
- Record
- SN01852403-W 20090624/090622235852-343d8e0a549ec40cb942d8446fe2faf8 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |