AWARD
34 -- Plasma Spray Powders - FA8125-09-M-0265
- Notice Date
- 6/23/2009
- Notice Type
- Award Notice
- NAICS
- 332117
— Powder Metallurgy Part Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, Tinker AFB - 72d Contracting Sq, 72 CONS, 7858 5th Street Ste 1, Tinker AFB, Oklahoma, 73145-9106
- ZIP Code
- 73145-9106
- Solicitation Number
- FA8125-09-Q-0207
- Archive Date
- 7/7/2009
- Point of Contact
- Harold Taylor, Phone: 405-739-4286, Leigh A Nunn, Phone: 405-739-4286
- E-Mail Address
-
harold.taylor@tinker.af.mil, leigh.nunn@tinker.af.mil
(harold.taylor@tinker.af.mil, leigh.nunn@tinker.af.mil)
- Small Business Set-Aside
- N/A
- Award Number
- FA8125-09-M-0265
- Award Date
- 6/22/2009
- Awardee
- Sulzer Metco (US) Inc, 1101 Prospect Ave, Westbury, New York 11590, United States
- Award Amount
- 78,585.00
- Line Number
- 0001-0003
- Description
- Award See attached Award Document FA8125-09-M-0265 for item details and specifics. This acquistion was not solicited on FBO due to urgency and sole source requirements. See clause at 52.209-1, Qualification Requirements: 52.209-1 QUALIFICATION REQUIREMENTS (FEB 1995) (a) Definition: "Qualification requirement," as used in this clause, means a Government requirement for testing or other quality assurance demonstration that must be completed before award. (b) One or more qualification requirements apply to the supplies or services covered by this contract. For those supplies or services requiring qualification, whether the covered product or service is an end item under this contract or simply a component of an end item, the product, manufacturer, or source must have demonstrated that it meets the standards prescribed for qualification before award of this contract. The product, manufacturer, or source must be qualified at the time of award whether or not the name of the product, manufacturer, or source is actually included on a qualified products list, qualified manufacturers list, or qualified bidders list. Offerors should contact the agency activity designated below to obtain all requirements that they or their products or services, or their subcontractors or their products or services, must satisfy to become qualified and to arrange for an opportunity to demonstrate their abilities to meet the standards specified for qualification. (Name) Thomas Grijalva (Address) 76 PMXG/QI, Materials Engineering Tinker AFB, OK 73145 (405) 736-7139 (c) If an offeror, manufacturer, source, product or service covered by a qualification requirement has already met the standards specified, the relevant information noted below should be provided. Offeror's Name Manufacturer's Name Source's Name Item Name Service Identification Test Number (to the extent known) (d) Even though a product or service subject to a qualification requirement is not in itself an end item under this contract, the product, manufacturer, or source must nevertheless be qualified at the time of award of this contract. This is necessary whether the Contractor or a subcontractor will ultimately provide the product or service in question. If, after award, the Contracting Officer discovers that an applicable qualification requirement was not in fact met at the time of award, the Contracting Officer may either terminate the contract for default or allow performance to continue if adequate consideration is offered and the action is determined to be otherwise in the Government's best interests. (e) If an offeror, manufacturer, source, product, or service has met the qualification requirement but is not yet on a qualified products list, qualified manufacturers list, or qualified bidders list, the offeror must submit evidence of qualification prior to award of this contract. Unless determined to be in the Government's interests, award of this contract shall not be delayed to permit an offeror to submit evidence of qualification. (f) Any change in location or ownership of the plant where a previously qualified product or service was manufactured or performed requires reevaluation of the qualification. Similarly, any change in location or ownership of a previously qualified manufacturer or source requires reevaluation of the qualification. The reevaluation must be accomplished before the date of award. (End of clause)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/OCALCBC/Awards/FA8125-09-M-0265.html)
- Record
- SN01853481-W 20090625/090624000115-462a2df701aef9e7bf19fa9ddebe0baa (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |