SOURCES SOUGHT
56 -- Request Quote: Resurfacing warehouse floor - bldg 206 resurfacing warehouse floor
- Notice Date
- 6/29/2009
- Notice Type
- Sources Sought
- NAICS
- 238330
— Flooring Contractors
- Contracting Office
- Department of the Air Force, Air Force Special Operations Command, 27 SOCONS, 110 E. Sextant, Cannon AFB, New Mexico, 88103-5109, United States
- ZIP Code
- 88103-5109
- Solicitation Number
- RFQA902
- Archive Date
- 7/21/2009
- Point of Contact
- bryian k. phillips, Phone: 5757842956
- E-Mail Address
-
bryian.phillips@cannon.af.mil
(bryian.phillips@cannon.af.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Scope of work: The contractor shall provide professional stripping, preparation and resurfacing warehouse floors. The floors are located in Bldg 206, south end, Cannon Air force base, 19,700 SF and 1,600 of floor joints, Scope of work: the contractor shall provide professional stripping, preparation and resurfacing warehous floors. The floors are located in Bldg 206, South End at cannon Air Force base, 19,700 SF and 1,600 of floor joint. Breakdown of work: a. shot blast or diamond-grind the entire area that will receive new coating to remove existing coating, if applicable and to remove a fine layer of concrete and prepare surface for coating. b. Diamond-grind a;ll edges, around columns and all areas that are not accessible with the large blasting quipment. c. Cut key-ways 1/2: deep at all transition points, such as doorways, drain and termoination point. d. Install a notched squeegee coat of Diamondstone EPrime 100% solids epoxy. Color to be clear. e. patch floor using DiamondStone Epoxy patch. f. Spread-apply a normal 1/4" of DiamondStone Diamond-HD. g. Power-trowel floor to compact mortar. h Diamond-grind floor. i. Vacuum floor. j. Apply a grout coat of Diamond-Stone HD Topcoat 100% solids epoxy. color to be chosen from manufacturer's standard color chart. k. Screen floor. l. Clean floor. m. Apply a topcoat of DiamondStone high-Traffic Topcoat. Color to be chosen from manufacturer's standard color chart. o. Prep floor to receive non=skip aggregate (Optional at customer request for same price). p. Apply light broadcast and backroll of non=skip aggregate by all exterior doors (Optional at customer request for same price). Other conditoins that apply: a. Owner is responsible for unloading all material at the job site. b. Owner is responsible for providing the building area in condition that is ready for contractor to begin.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFSOC/FA4855/RFQA902/listing.html)
- Place of Performance
- Address: Cannon Air Force Base, Building 206 South end, Clovis, New Mexico, 88103, United States
- Zip Code: 88103
- Zip Code: 88103
- Record
- SN01859813-W 20090701/090630000113-1b5b0f81fcdcea23b301fe6139587479 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |