SPECIAL NOTICE
80 -- SEALING COMPOUND - SOP CLAUSES - BID SHEET
- Notice Date
- 6/29/2009
- Notice Type
- Special Notice
- NAICS
- 325520
— Adhesive Manufacturing
- Contracting Office
- General Services Administration, Federal Supply Service (FSS), FAS Heartland Region (6FC and QSDAA), 1500 East Bannister Road, Kansas City, Missouri, 64131, United States
- ZIP Code
- 64131
- Solicitation Number
- 8030-01-363-5976
- Archive Date
- 7/2/2009
- Point of Contact
- Dana M Karlin, Phone: 816-823-2300
- E-Mail Address
-
dana.karlin@gsa.gov
(dana.karlin@gsa.gov)
- Small Business Set-Aside
- N/A
- Description
- BID SHEET SOP CLAUSES 2 ORDERS QTY: 24 & 400 DESTINATIOIN: CALIFORNIA 8030-01-363-5976 UI: CA SEALING COMPOUND: DESCRIPTION A two-part, corrosion inhibitive, polysulfide sealant applicable by extrusion or injection gun for use on aluminum to seal joints in aircraft fuselages and filling voids and gaps in structures. Work life: 2 hours Size: a minimum of 5.75 fl oz of quick frozen, premixed base compound and curing agent in a 6.0 oz cartridge Shelf life code: A (1 month, non-extendable) Maximum age on delivery: Supplies furnished under this contract shall have minimums of two months shelf life remaining at time of premixing and freezing and 28 days of shelf life from date of shipment. PRC-DeSoto International Inc. part number P/S-870 B-2 or AC Tech Inc. part number AC-665 B-2. ITEM MARKING Special item marking for premixed and frozen products shall include: (1) specification identification - specification number, type, class, grade, etc. as applicable and required by governing specification. (2) manufacturer's name and part number (3) lot or batch number (4) dates of mixing, packaging, and expiration (5) instructions for use (6) instructions for storage that include, "Store below -40 deg. F." (7) numbering to correspond to numbered button boards for polysulfide cartridges only. PACKAGING PACKAGING: The product shall be furnished in the specified quantities and in the specified containers of the types normally used for this product and maintained at or below -40 deg. F. There shall be no interaction chemically or physically with the contents which would damage the containers or alter the strength, quality, or purity of the contents. The container closures shall prevent the leakage of material during shipment, handling, storage, and redistribution. PACKING PACKING: Premixed/frozen, dry ice packed, containers packaged as described above shall be further packed in a close-fitting, corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification (200 minimum burst). Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. Gross weight of the box and contents shall not exceed 65 pounds. MARKING All unit, intermediate, transport packages and unit loads shall be marked and bar coded for delivery to civilian activities in accordance with the latest version of FED-STD-123, "Marking For Shipment (Civil Agencies)", or marked and bar coded for delivery to military activities in accordance with the latest version of MIL-STD-129, "Military Marking For Shipment and Storage". "Latest version" is defined as the version in effect on the date of bid submittal. Federal Standards and Military Standards can be accessed on-line via the Defense Logistics Agency's "Assist" Quicksearch web site: http://assist.daps.dla.mil/quicksearch/. South Coast Air Quality Management District Provision: If the item is on an existing contract, the supplier shall follow the pre-arranged California South Coast Air Quality Management District labeling requirements. PALLETIZATION Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free. Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight for shipments to Eastern Distribution Center (Burlington). The palletized load shall not exceed 2000 pounds in weight for shipments to the Western Distribution Center (Sharpe). Stacking Strength: The pallet plus the load shall be capable of supporting two additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength. Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only. NOTICE OF REQUIREMENTS FOR SHIPMENT TO EUROPEAN UNION COUNTRIES: Per Clause D-FSS-468, non-manufactured wood pallets and other non-manufactured wood package material used in shipments destined for ultimate delivery to or through a European Union (EU) country shall comply with the Emergency Measures (2001/219/EC) adopted by the Commission of the European Communities (CEC). Additionally, shipments delivered to DoD distribution facilities or freight consolidation points for eventual delivery to or through EU countries shall comply with DLA PROCLTR 01-15.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/GSA/FSS/6FE/8030-01-363-5976/listing.html)
- Record
- SN01860621-W 20090701/090630001717-087647c3058dc266e34d21fe2c07959d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |