Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF JULY 31, 2009 FBO #2804
MODIFICATION

23 -- RECOVERY--23--Aluminum Trailers to carry/transport Underwaterh Remotely Operated Vehicles

Notice Date
7/29/2009
 
Notice Type
Modification/Amendment
 
NAICS
336212 — Truck Trailer Manufacturing
 
Contracting Office
Department of the Army, U.S. Army Corps of Engineers, U.S. Army Engineer District, Kansas City, US Army Engineer District, Kansas City, ATTN: CENWK-CT, 700 Federal Building 60l East 12th Street, Kansas City, MO 64106-2896
 
ZIP Code
64106-2896
 
Solicitation Number
W912DQ09T1036
 
Response Due
8/13/2009
 
Archive Date
10/12/2009
 
Point of Contact
Andre D. Vasseur, 816-389-3435<br />
 
E-Mail Address
US Army Engineer District, Kansas City
(andre.d.vasseur@usace.army.mil)
 
Small Business Set-Aside
Total Small Business
 
Description
RECOVERY--The purpose of this amendment is to correct the statement of work to read as follows: Base Trailer Axles Axles shall be rated to handle the weight of the trailer, interior finishes and an additional load of at least 3500 lbs of cargo. Brakes shall be of an electric type and rated for the weight of the entire trailer plus cargo. GVWR will be at least 7,000 lbs. Rims and Tires Rims shall be constructed of aluminum metal, steel will not be accepted. Tires shall be of a radial type trailer tire rated for the weight of the entire trailer plus cargo. Tires will also be at least 15 inch diameter. Spare tire with aluminum rim and carrier shall be included. Trailer Trailer frame shall be 100 percent aluminum with the exception of the hitch section which will be a bolted on galvanized 2 inch or 2 5/16 inch coupler. Hitch weight will not exceed 700 lbs. All driving lights will be of an LED DOT approved type. Wiring harness for running lights will be bundled in a protective jacket in a watertight seal. Trailer will come with an integral battery with breakaway kit. Trailer will have 4 scissor type stabilizers installed at each corner of the trailer. Trailer shall come with an adjustable front jack and wheel. Minimum Dimensions shall be 7 feet wide by 12 feet long; dimensions may need to be larger to give enough room for other specified items. Body Body will be of an aluminum frame with FRP or bonded vacuum aluminum sides. Entrance door will be at least 36 inches wide. Rear door will be a roll up type at least 5 feet in width. Interior height will be at least 7 feet high. Floor will be treated plywood at least 5/8 inch thick with commercial RV flooring. Interior walls prior to finish will be at least inch thick plywood. Diamond plate stone guard in front will be provided. Body design will allow for a 5 foot deck space between the rear door and end of trailer, the deck will include 4 recessed D-rings. On this deck mounted on the driver side will be an articulated crane integrally mounted to the deck of the trailer. The articulated crane will be able to perform the following; hydraulically extend to at least 13 foot 8 inches and manually extendable out to 16 foot 10 inches, capacity of at least 890 pounds at full extension, max lifting moment of at least 12,900 pounds per foot, and have hydraulically actuated outriggers. On the passenger side of the deck shall be a stacked 4 foot long exterior storage. The top of the exterior storage shall be a tool box lid type access and the bottom of the exterior storage shall be accessible from the passenger side ground level. Exterior lighting shall be at least 5 500 watt halogen external lights UL listed for outdoor use. The lights shall be located in the following manner, one above entrance door, two mounted above and to the left and right of the rear door and two mounted on the driver side at approximately the same height as the rear lights. Roof shall be of an aluminum metal type. The body design will have a frame infrastructure that includes a generator compartment. The body design will also include a heavy duty cable access door to run ROV monitoring and control cables through without exposing the cabin to the elements. The body design will be fully insulated to recreational vehicle standards. Customized interior and overall layout Interior floor shall be made of a slip resistant rubber type. Interior walls shall be white in color. Ceiling shall be white with recessed lighting. Interior will be made for a two person work station with room for two others to be standing in close proximately. Other interior cabinetry shall be as follows: 1) 1 - 3 foot wide by 2 foot deep by 6 foot high with 4 shelves. 2) 1 -12 drawer cabinet. 3) 1 6 foot long stainless steel work bench, cabinets underneath and overhead cabinets. Interior electrical will consist of 110 volt fluorescent lighting 3 15 amp receptacles along workbench, and 3 15 amp receptacles along the workstation. Recreational Vehicle Carbon Monoxide detector will be provided and integrated into interior. 110 volt ship to shore line will be provided to power trailer systems without a generator. HVAC system will include a roof mounted air conditioner capable of at least 13,500 BTU and a 120 volt heating system capable of at least 27,000 BTUs. Two powered roof vents will be included. A Generator will be provided by the contractor that is capable of running all electrical systems including the HVAC system. Exterior electrical system shall provide three externally rated 15 amp receptacles, one located in the rear and one located on the driver side and on located on passenger side. Contractor will submit a proposal for a customized interior and layout that will be part of the bid evaluation process. Contractor will allow for 2 government employees to travel to Contractors location to finalize layout on CADD for 1 day. Warranty Entire trailer including all sub systems provided by Contractor will be warrantied for one year.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA41/W912DQ09T1036/listing.html)
 
Place of Performance
Address: US Army Engineer District, Kansas City ATTN: CENWK-CT, 700 Federal Building 60l East 12th Street Kansas City MO<br />
Zip Code: 64106-2896<br />
 
Record
SN01891762-W 20090731/090730001153-6a1a17770b7c81186d2e1937e63c7068 (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.