SPECIAL NOTICE
99 -- AEROTECH REPLACEMENT PARTS
- Notice Date
- 8/7/2009
- Notice Type
- Special Notice
- NAICS
- 333512
— Machine Tool (Metal Cutting Types) Manufacturing
- Contracting Office
- Department of Commerce, National Institute of Standards and Technology (NIST), Acquisition Management Division, 100 Bureau Drive, Building 301, Room B129, Mail Stop 1640, Gaithersburg, Maryland, 20899-1640
- ZIP Code
- 20899-1640
- Solicitation Number
- NB844040-9-06426
- Archive Date
- 8/26/2009
- Point of Contact
- Janice M Moten, Phone: (301)975-6307
- E-Mail Address
-
Janice.Moten@nist.gov
(Janice.Moten@nist.gov)
- Small Business Set-Aside
- N/A
- Description
- The National Institute Of Standards And Technology (NIST) Intends To Negotiate, On a sole source basis under the authority of FAR 13.106(1)(b), with Aerotech, Inc. 101 Zeta Drive, Pittsburg, PA 15238-2811 for replacement items as stated below: Part number: ATS50060WB-M-02P-BMS-NC-9DU DescrIption: ATS50060WB-M-02P-BMS-NC-9DU The ATS5000WB is a wide body version of the ATS5000. It retains all of the same features as the ATS5000 plus a larger base. Because of the increased spacing between linear bearings, high accuracy is maintained when dealing with cantilevered loads. It performs outstandingly as a lower axis when combined with the ATS5000. 060: 600 mm (24 in) travel stage -M: Table-top with Metric dimension mounting pattern and holes. Stage mounting base holes slotted for English and metric installation -02P: 0.2 inch per rev drivescrew lead -BMS: BMS280E brushless servo motor with connectors and 1000-line encoder (BMS280-MS-E1000H) -NC-9DU: Normally closed end of travel limit switches, 9-pin D connector ENSEMBLE-MC-MACHINE-LABVIEW-MAINTENANCE -2-00 MOTION COMPOSER STANDARD: Includes the Integrated Development Environment, Scope, System Diagnostics, and System Maintenance. Full installation of selected Ensemble software components on a new system. Full part number includes software options listed below. Pricing is summation of selected software products. Maintenance (software update) included in price for one year from date of purchase. - Ensemble Motion Composer is intended for deployment on desktop or industrial PC's with a minimum Intel Pentium 4 processor, 512 MB RAM, Windows? XP or Windows? Vista Business (without SP1 installed). A full list of PC requirements and recommendations is available at www.aerotech.com. Includes the following software options: -MACHINE: Provides the ability to: - Write, compile, execute, debug programs in Aerobasic - Full access to.NET 2.0 and C Library - Access full diagnostics, fault, and status information - Access and set I/O, registers, and variables - Collect, analyze and save data - View files from machine for analysis and record keeping - Connect PC to machine through Ethernet TCP/IP or USB - Upgrades can be installed (firmware or controller) using Loader INCLUDES ENSEMBLE-MC STANDARD -LABVIEW: Includes LABVIEW 8.2 VI samples - MAINTENANCE: Period of time a Licensee can receive Upgrades. -y is number of years (1 to 6) and -mm is number of months (0 to 12) which is normally 00. If selling partial years consult factory. Maintenance for 1 Additional Year. Part Number: ENSEMBLECP10 Controller, cabling and all hardware required to operate the stage (item 1), including the following: Ensemble CP Series multi-axis PWM digital controller with USB and Ethernet interface. 5A continuous, 10A peak, 28-240 VAC supply input, and 85-240VAC control supply input for logic. Drives brushless, brush and stepper motor. Includes: - 4 digital inputs, - 2 high speed digital inputs, - 4 digital outputs, - one 16 bit analog differential input; +/-10 VDC - one 16 bit analog single ended output; +/-10 VDC - one 24VDC, 1 amp brake relay - Single axis PSO capability - 2 quadrature encoder input channels (primary & auxiliary) - Estop sense input - Dedicated Home and Limit Inputs The Government anticipates the award of a firm-fixed price purchase order. This notice if intent is not a request for competitive quotations; however companies that believe they can fulfill the requirement may provide a written response to this notice and provide evidence to substantiate that capability. A determination by the Government whether to compete this proposed requirement based upon response to this notice is solely with the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct competition. A Firm-Fixed Price Purchase order will be issued on or about August 11, 2009.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DOC/NIST/AcAsD/NB844040-9-06426/listing.html)
- Place of Performance
- Address: 301/b149, GAITHERSBURG, Maryland, 20899, United States
- Zip Code: 20899
- Zip Code: 20899
- Record
- SN01903679-W 20090809/090808000601-45e949ddc715cad80bdbcaa7094daae0 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |