Loren Data's SAM Daily™

FBO DAILY ISSUE OF AUGUST 23, 2009 FBO #2829
SOLICITATION NOTICE

35 -- Sensor Electronic Repair Center

Notice Date

8/21/2009
 

Notice Type

Combined Synopsis/Solicitation
 

Contracting Office

1300 Pennsylvania Avenue, NW, Washington, DC 20229
 

ZIP Code

20229
 

Solicitation Number

20046985
 

Response Due

8/28/2009
 

Archive Date

2/24/2010
 

Point of Contact

Name: Sharon Brown, Title: Contract Specialist, Phone: (202) 344-3851, Fax:
 

E-Mail Address

sharon.brown1@dhs.gov;
 

Small Business Set-Aside

N/A
 

Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is 20046985 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-34. The associated North American Industrial Classification System (NAICS) code for this procurement is 333319 with a small business size standard of 500.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2009-08-28 13:30:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Jacksonville, FL 32244 The DHS Customs and Border Protection requires the following items, Brand Name or Equal, to the following: LI 001, WORKSTATION, RTW 36X60, ADJ 30-36", BLUE FRAME, GRAY LAMINATE WORKSTATION, RTW 36X60, ADJ 30"-36" ON 2" INCREMENTS,FRAMES INCLUDED FULLY WELDED LEGS, 2" X 2" SQUARE TUBE 14 GA STEEL & 14 GA CROSS RAIL SUPPORTS POWDER COATED BLUE. LAMINATED WORKSURFACES INCLUDE 1.25" THICK INDUSTRIAL GRADE PARTICLE BOARD, GRAY LAMINATE AND INDUSTRIAL GRADE T-MOLDED EDGES. MFG Production Basics MFG P/N 3007, 16, EA; LI 002, WORKSTATION, RTW 30X60, ADJ 30-36", BLUE FRAME, GRAY LAMINATE - WORKSTATION, RTW 30X60, ADJ 30"-36" ON 2" INCREMENTS,FRAMES INCLUDED FULLY WELDED LEGS, 2" X 2" SQUARE TUBE 14 GA STEEL & 14 GA CROSS RAIL SUPPORTS POWDER COATED BLUE. LAMINATED WORKSURFACES INCLUDE 1.25" THICK INDUSTRIAL GRADE PARTICLE BOARD, GRAY LAMINATE AND INDUSTRIAL GRADE T-MOLDED EDGES. MFG Production Basics MFG P/N 3005, 9, EA; LI 003, WORKSTATION, RTW 36X72, ADJ 30-36", BLUE FRAME, GRAY LAMINATE WORKSTATION, RTW 30X72, ADJ 30"-36" ON 2" INCREMENTS,FRAMES INCLUDED FULLY WELDED LEGS, 2" X 2" SQUARE TUBE 14 GA STEEL & 14 GA CROSS RAIL SUPPORTS POWDER COATED BLUE. LAMINATED WORKSURFACES INCLUDE 1.25" THICK INDUSTRIAL GRADE PARTICLE BOARD, GRAY LAMINATE AND INDUSTRIAL GRADE T-MOLDED EDGES. MFG Production Basics MFG P/N 3011, 2, EA; LI 004, 60" UPRIGHTS - 60" STURDY UNISTRUT UPRIGHTS, THAT ATTACHES TO WORKSTATION AND ALLOWS APPROPRIATELY SIZED ACCESSORIES TO BE MOUNTED MFG Production Basics MFG P/N 8536, 27, EA; LI 005, WORKSTATION, CASTER OPTION WORKSTATION, RTW 30X60, ADJ 30-36", BLUE FRAME, GRAY LAMINATE, CASTER OPTION. MFG Production Basics. MFG P/N Q4241A, 1, EA; LI 006, 12X72 LAMINATE SHELF, GRAY LAMINATE 12X72 LAMINATE SHELF, HEAVY DUTY SHELF FOR APPLICATIONS OF UP TO 175 LBS LAMINATED SHELVES INCLUDE 1.25" THICK INDUSTRIAL GRADE PARTICLE BOARD, GRAY LAMINATE AND INDUSTRIAL GRADE T-MOLDED EDGES. MFG Production Basics MFG P/N 8457, 1, EA; LI 007, 72" LIGHT WITH SUPPORT ARMS OVERHEAD LIGHT WITH ALL METAL CONSTRUCTION, FOR 72 INCH WIDE STATION, INCLUDES LOCATIONS FOR UP TO (3) T8 BULBS AND LENSES COVER. ANGLED SUPPORT ARMS TO MAINTAIN MOUNTING CLEARANCE. MFG Production Basics MFG P/N 8510, 1, EA; LI 008, 72", 15 AMP POWER RAIL POWER RAIL, FOR 72 INCH WIDE STATION, INCLUDES UNIVERSAL MOUNTING BRACKETS, 8 OUTLETS PER BAR WITH ILLUMINATED CIRCUIT BREAKER AND 8 FOOT CORDS. MFG Production Basics MFG P/N 8326, 2, EA; LI 009, 6" DRAWER 6" FULL EXTENSION DRAWERS, CONSTRUCTED COMPLETELY OF METAL WITH BALL BEARING SLIDES, STACKABLE WITH OTHER DRAWERS. MFG Production Basics MFG P/N 8606, 19, EA; LI 010, 12" DRAWER 12" DRAWER - FULL EXTENSION DRAWERS, CONSTRUCTED COMPLETELY OF METAL WITH BALL BEARING SLIDES, STACKABLE WITH OTHER DRAWERS MFG Production Basics MFG P/N 8611, 18, EA; LI 011, TOOL SHELF 60" 60" TOOL SHELF AND BIN RAIL, 6 INCH DEEP SHELF WITH FRONT LIP SUPPORT. INCLUDES LOCATIONS TO ATTACH AIR FITTINGS. MFG Production Basics MFG P/N 8493, 16, EA; LI 012, 60" LIGHT WITH SUPPORT ARMS OVERHEAD LIGHT WITH ALL METAL CONSTRUCTION, FOR 60 INCH WIDE STATION, INCLUDES LOCATIONS FOR UP TO (3) T8 BULBS AND LENSES COVER. ANGLED SUPPORT ARMS TO MAINTAIN MOUNTING CLEARANCE. MFG Production Basics MFG P/N 8505, 25, EA; LI 013, 12X60 METAL UNIVERSAL SHELF 12X60 METAL SHELF, VERSATILE METAL SHELF THAT CAN BE ANGLED FROM 0-30 DEGREE, WITH OR WITHOUT A 1 INCH LIP. SUPPORTS UP TO 125LBS OF EVENLY DISTRIBUTED WEIGHT. MFG Production Basics MFG P/N 8413, 6, EA; LI 014, 12X60 LAMINATE SHELF, GRAY LAMINATE 12X60 LAMINATE SHELF, HEAVY DUTY SHELF FOR APPLICATIONS OF UP TO 175 LBS LAMINATED SHELVES INCLUDE 1.25" THICK INDUSTRIAL GRADE PARTICLE BOARD, GRAY LAMINATE AND INDUSTRIAL GRADE T-MOLDED EDGES. MFG Production Basics MFG P/N 8455, 5, EA; LI 015, 15X60 LAMINATE SHELF, GRAY LAMINATE 15X60 LAMINATE SHELF, HEAVY DUTY SHELF FOR APPLICATIONS OF UP TO 175 LBS LAMINATED SHELVES INCLUDE 1.25" THICK INDUSTRIAL GRADE PARTICLE BOARD, GRAY LAMINATE AND INDUSTRIAL GRADE T-MOLDED EDGES. MFG Production Basics MFG P/N 8423, 10, EA; LI 016, 18X60 LAMINATE SHELF, GRAY LAMINATE 18X60 LAMINATE SHELF, HEAVY DUTY SHELF FOR APPLICATIONS OF UP TO 175 LBS LAMINATED SHELVES INCLUDE 1.25" THICK INDUSTRIAL GRADE PARTICLE BOARD, GRAY LAMINATE AND INDUSTRIAL GRADE T-MOLDED EDGES. MFG Production Basics MFG P/N 8428, 2, EA; LI 017, CORNER UNIT, 30X36 BLUE FRAME, GRAY ESD LAMINATE CORNER UNIT, 30X36 BLUE FRAME, GRAY ESD LAMINATE, ADJ 30-36" ON 2" INCREMENTS, FULLY WELDED FRAME. MFG Production Basics MFG P/N 3518, 1, EA; LI 018, FLAT SCREEN MONITOR ARM FLAT PANEL ARTICULATING ARM WITH SWIVEL MOUNTING PLATE, ACCEPTS BOTH 75MM & 100MM MOUNTING. MFG Production Basics MFG P/N 8632, 14, EA; LI 019, CRT PLATFORM DOUBLE ARTICULATING MONITOR ARM, 12.75X12.75 PLATFORM, TO HOLD CRT STYLE MONITOR. MFG Production Basics MFG P/N 8631, 2, EA; LI 020, CPU HOLDER CPU HOLDER WHICH FEATURES SMOOTH SLIDE AND ROTATION FOR EASY ACCESS TO CORDS AND PORTS. MFG Production Basics MFG P/N 8482, 14, EA; LI 021, LARGE WORKSURFACE GROUND BOLT MFG Production Basics MFG P/N 8872, 52, EA; LI 022, 14" UNIVERSAL MOUNT 14" UNIVERSAL MOUNT TO USE WITH MAGNIFIERS, LAMPS, ETC.. UTILIZING A 1/2 INCH DIA PEG. MFG Production Basics MFG P/N 8643, 4, EA; LI 023, 60", 15 AMP POWER RAIL POWER RAIL, FOR 60 INCH WIDE STATION, INCLUDES UNIVERSAL MOUNTING BRACKETS, 8 OUTLETS PER BAR WITH ILLUMINATED CIRCUIT BREAKER AND 8 FOOT CORDS. MFG Production Basics MFG P/N 8323, 25, EA; LI 024, SCALE TABLES SCALE TABLE WORKSTATION, RTW 30X30, ADJ 25"-31" ON 2" INCREMENTS,FRAMES INCLUDED FULLY WELDED LEGS, 2" X 2" SQUARE TUBE 14 GA STEEL & 14 GA CROSS RAIL SUPPORTS POWDER COATED BLUE. LAMINATED WORKSURFACES INCLUDE 1.25" THICK INDUSTRIAL GRADE PARTICLE BOARD, GRAY LAMINATE AND INDUSTRIAL GRADE T-MOLDED EDGES. MFG Production Basics MFG P/N 1762, 6, EA; LI 025, LEG ADJUSTER FOR SCALE TABLES, ADJUSTMENT 30-36" LEG ADJUSTER FOR SCALE TABLES, ADJUSTMENT 30-36". MFG Production Basics MFG P/N Q3784J, 6, EA; LI 026, CASTER SETS - 4 INCH CASTES WITH SWIVEL LOCKING CASTERS. MFG Production Basics MFG P/N 8971, 6, EA; LI 027, PACK STATION 36X72 BUTCCHER BLOCK TOP PACK STATION 36X72 BUTCCHER BLOCK TOP. MFG Production Basics MFG P/N 8045, 1, EA; LI 028, BUBBLE WRAP / LABEL HOLDER, 72" TUBULAR PAPER ROLL HOLDER, 72 INCH, PROVIDES EASY ACCESS TO ROLLS AND LABELS. BRACKET LOCATION ADJUSTMENT FOR 3 DEPTHS. MFG Production Basics MFG P/N 8724, 1, EA; LI 029, UNIVERSAL SHELF 72" VERSATILE METAL SHELF THAT CAN BE ANGLED FROM 0-30 DEGREE, WITH OR WITHOUT A 1 INCH LIP. SUPPORTS UP TO 125LBS OF EVENLY DISTRIBUTED WEIGHT. MFG Production Basics MFG P/N 8416, 1, EA; LI 030, PACK OF 4, 12" SHELF DIVIDERS PACK OF 4, 12" SHELF DIVIDERS. MFG Production Basics MFG P/N 8964, 1, EA; LI 031, 24x24 DIVIDER TO ATTACH TO UNDERSIDE OF WORKSTATION FOR BOX DIVIDERS 24x24 DIVIDER TO ATTACH TO UNDERSIDE OF WORKSTATION FOR BOX DIVIDERS. MFG Production Basics MFG P/N Q4241C, 5, EA; LI 032, 3M CONTINUOUS MONITOR MFG 3M MFG P/N 724, 15, EA; LI 033, REMOTE SPLITTER KIT MFG 3M MFG P/N 733, 15, EA; LI 034, STAND BY JACK MFG 3M MFG P/N 3057, 30, EA; LI 035, ESD Wrist Strap FABRIC ADJUSTABLE WRIST STRAP FOR USE WITH 724 MONITOR MFG 3M MFG P/N 2368, 10, EA; LI 036, DUAL CONDUCTOR GROUND CORD, 10 FOOT LENGTH MFG 3M MFG P/N 2370, 10, EA; LI 037, VERIFICATION KIT FOR ESD MONITORS MFG 3M MFG P/N 724VK, 1, EA; LI 038, ESD WORK STATION COVER 24"x36" TECHNISTAT ESD WORK STATION COVER MFG TECHNISTAT MFG P/N 758ST3051, 6, EA; LI 039, ESD WORK STATION COVER 48"x48" TECHNISTAT ESD WORK STATION COVER MFG TECHNISTAT MFG P/N 758ST3054, 6, EA; LI 040, ESD DISSAPATIVE MAT TECHNISTAT DISSAPATIVE MAT 2' x 50' gray 3 layer vinyl MFG TECHNISTAT MFG P/N 80001136201, 1, EA; LI 041, ESD DISSAPATIVE MAT TECHNISTAT DISSAPATIVE MAT 3' x 50' gray 3 layer vinyl MFG TECHNISTAT MFG P/N 80001136193, 1, EA; LI 042, TWO LAYER ESD MATTING TWO LAYER ESD MATTING 2' X 24' (ROLLS WHICH CAN BE CUT TO LENGTH) MFG TECHNISTAT MFG P/N 8840, 2, EA; LI 043, ESD Jacket, V-neck M MFG TECH WEAR MFG P/N VOJ-23-M, 2, EA; LI 044, ESD Jacket, V-neck L- MFG TECH WEAR MFG P/N VOJ-23-L -, 6, EA; LI 045, ESD Jacket, V-neck XL- MFG TECH WEAR MFG P/N VOJ-23-XL, 6, EA; LI 046, BEVCO CHAIR, ADJ 27 - 32" HEIGHT BEVCO CHAIR, ADJ 27 - 32" HEIGHT, 12 YEAR INTENSIVE UE GUARANTEE, LIFE TIME GUARANTEE ON PNEUMATIC CYLINER. MFG BEVCO MFG P/N 5601, 23, EA; LI 047, HARD FLOOR CASTERS MFG BEVCO MFG P/N CADS/5, 23, EA; LI 048, TURN TABLE MFG Fancort MFG P/N D500, 2, EA; LI 049, Infinite Divider System MFG Flambeau MFG P/N 8500JT, 10, EA; LI 050, CABINET 48W X 24D X 78H, 3 ADJ SHELVES W/ 800 LB CAPACITY MFG Quantum MFG P/N QSC-31S, 1, EA; LI 051, FLAMMABLE STORAGE CABINET FLAMMABLE STORAGE CABINET, 43W X 18D X 65H, W/2 SHELVES, SELF CLOSING DOORS. MFG LYON MFG P/N 5445N, 3, EA; LI 052, EXTRA SHELVES, FLAMMABLE STORAGE CABINET MFG LYON MFG P/N 5449N, 6, EA; LI 053, CABINET CABINET 36W X 24D X 72H, 4 ADJ SHELVES. MFG Quantum MFG P/N QSC-36-41S-12DS, 2, EA; LI 054, CABINET CABINET 48W X 24D X 78H, 3 ADJ SHELVES W/ 800 LB CAPACITY MFG Quantum MFG P/N QSC-31S, 5, EA; LI 055, PARTS CABINET PARTS CABINET, 48W X 24D X 78H, BINS AND DRAWER CABINETS INC. MFG Quantum MFG P/N QSC-QIC161, 1, EA; LI 056, PARTS CABINET PARTS CABINET, 36W X 18D X 78H, MFG Quantum MFG P/N QSC-362072-5, 3, EA; LI 057, CABINET DRAWER DIVIDERS DIVIDERS, PACK OF 25 FOR ABOVE DRAWER CABINETS, MFG Quantum MFG P/N DIV201, 4, EA; LI 058, LIFT TABLE WESCO LIFT TABLE, 700 LB CAPACITY MFG WESCO MFG P/N 260199, 2, EA; LI 059, Delivery and Installation, 1, LT; For this solicitation, DHS Customs and Border Protection intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DHS Customs and Border Protection is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. Full set-up and installation of all unassembled furniture shall be included in price proposal. Offeror must be registered in the Central Contractor Registration (CCR) database before an award can be made to them. If the offeror is not registered in the CCR, it may do so through the CCR website at http://www.ccr.gov. The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at http://www.acqnet.gov/far. tbd
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCS/PDDC20229/20046985/listing.html)
 

Place of Performance

Address: Jacksonville, FL 32244

Zip Code: 32244
 

Record

SN01921424-W 20090823/090822001759-d9dca0b1251219b2b26834449150ce79 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |