PRESOL | 81 | CORRUGATED FIBERBOARD BOXES

FBO DAILY ISSUE OF SEPTEMBER 06, 2009 FBO #2843
SOLICITATION NOTICE

81 -- CORRUGATED FIBERBOARD BOXES

Notice Date: 9/4/2009
Notice Type: Combined Synopsis/Solicitation
NAICS: 322211 — Corrugated and Solid Fiber Box Manufacturing
Contracting Office: Defense Logistics Agency, DLA Acquisition Locations, Defense Distribution Center, 2001 Mission Drive, DDC CSS-AB, Bldg 404, New Cumberland, Pennsylvania, 17070-5001, United States
ZIP Code: 17070-5001
Solicitation Number: SP3300-09-Q-0132
Point of Contact: Laura A. Dodson, Phone: 7177705516
E-Mail Address: laura.dodson@dla.mil
(laura.dodson@dla.mil)
Small Business Set-Aside: N/A
Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. This is a Request for Quote (RFQ) and the solicitation number is SP3300-09-Q-0132. This acquisition is 100% set-aside for small business concerns. The NAICS code applicable to this acquisition is 322211 and the small business size standard is 500 employees. This notice incorporates provisions and clauses in effect through Federal Acquisition Circular (FAC) 2005-36 effective 11 August 2009 and Defense Federal Acquisition Regulation Supplement (DFARS) DCN 20090825 edition and Defense Logistics Acquisition Directive (DLAD) Current to Revision 5 and PROCLTR 2009-30. The complete text of any of the clauses and provisions may be accessed in full text at http://farsite.hill.af.mil. The Defense Distribution Depot San Joaquin, Tracy, CA (DDJC) has a requirement for various sizes of domestic corrugated fiberboard shipping boxes. Request FOB Destination pricing with delivery to Defense Distribution Depot San Joaquin, Supply Branch, Whse 21, Sec 4, 25600 Chrisman Rd., Tracy, CA 95304. CLIN 0001 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 12 INCH LONG X 8 INCH WIDE X 8 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L020051. 340 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0002 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, DOUBLE WALL, REGULAR SLOTTED CARTON, SIZE: 24 INCH LONG X 24 INCH WIDE X 24 INCH DEEP. 350 PUNDS PER SQUARE INCH BURSTING STRENGTH. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M-90 AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 15 EACH PER BUNDLE. STOCK NUMBER 811500L020049. 117 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0003 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 14 INCH LONG X 14 INCH WIDE X 14 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 8115001179525. 44 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0004 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 10 INCH LONG X 10 INCH WIDE X 10 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L962489. 86 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0005 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 20 INCH LONG X 15 1/2 INCH WIDE X 13 1/2 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M-90 SECTION 8 AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L020041. 505 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0006 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 24 INCH LONG X 24 INCH WIDE X 6 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 8115006094164. 26 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0007 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, FULL OVERLAP SLOTTED CARTON, SIZE: 38 INCH LONG X 4 INCH WIDE X 4 INCH DEEP. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M-90 SECTION 8 AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 8115001491546. 18 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0008 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 12 INCH LONG X 12 INCH WIDE X 6 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L962483. 62 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0009 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 16 INCH LONG X 16 INCH WIDE X 16 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L980011. 34 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0010 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 27 INCH LONG X 17 INCH WIDE X 14 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 8115006094287. 169 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0011 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 8 INCH LONG X 8 INCH WIDE X 8 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L980014. 718 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0012 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 20 INCH LONG X 20 INCH WIDE X 20 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 25 EACH PER BUNDLE. STOCK NUMBER 811500L980013. 74 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL CLIN 0013 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, DOUBLE WALL, FULL OVERLAP SLOTTED BOX (FOL) GLUED INSIDE LENGTH PLAIN, SIZE: 36 INCH LONG X 24 INCH WIDE X 24 INCH DEEP. 275 PUNDS PER SQUARE INCH BURSTING STRENGTH. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. STOCK NUMBER 811500L040031. 100 EACH @ $_______________ EACH = $_______________ TOTAL CLIN 0014 – BOX, SHIPPING, CORRUGATED FIBERBOARD, DOMESTIC, SINGLE WALL, REGULAR SLOTTED CARTON, SIZE: 24 INCH LONG X 24 INCH WIDE X 12 INCH DEEP, FOUR FLAPS ON TOP AND FOUR FLAPS ON BOTTOM; OUTER FLAPS MEET WHEN CLOSED. 275 POUNDS PER SQUARE INCH BURSTING STRENGTH. MAXIMUM WEIGHT OF CARTON AND CONTENTS IS 95 POUNDS. 100 PERCENT RECYCLED FIBER CONTENT WITH 35 PERCENT BEING POST CONSUMER RECYCLED MATERIAL. ASTM D5118/D5118M AND CURRENT CHANGES APPLY. REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET OF MATERIAL. 15 EACH PER BUNDLE. STOCK NUMBER 811500L020047. 21 BUNDLES @ $_______________ BUNDLE = $_______________ TOTAL TOTAL OF ALL CLINS: $ ___________________________ NOTE: REQUEST MANUFACTURER PRINT STOCK NUMBER AND UNIT PACK ON EACH PALLET. ECT 44 IS EQUIVALENT TO 275 ONLY NOT 200 OR 350. Any award resulting from this solicitation will be issued on a Standard Form (SF) 1449. The method of payment for supplies under this order is by the Acquisition Operations Office via the Government Purchase Card (VISA). All questions and inquiries should be addressed via email to laura.dodson@dla.mil, Request for Quote Number SP3300-09-Q-0132. Offerors responding to this announcement shall submit their quotations via FAX to Laura Dodson, 717-770-7591 or e-mail to laura.dodson@dla.mil All quotes must be received by 17 September 2009, 3:00PM ET to be considered for award. Contractors must be capable of accepting payment by government credit card for this procurement. The following FAR, DFARS, and DLAD clauses and provisions apply to this acquisition. The full text version of these clauses and provisions may be viewed at http://farsite.hill.af.mil/. FAR 52.212-4Contract Terms and Conditions–Commercial Items (Mar 2009), Addenda to 52.212-4; the following clauses apply: FAR 52.223-4 Recovered Material Certification (MAY 2008) FAR 52.247-34 FOB Destination (NOV 1991) FAR 52.211-9 Desired and Required Time of Delivery (JUN 1997) (a) The Government desires delivery to be made according to the following schedule: DESIRED DELIVERY SCHEDULE – All items within 14 days after date of contract award. If the offeror is unable to meet the desired delivery schedule, it may, without prejudicing evaluation of its offer, propose a delivery schedule below. However, the offeror’s proposed delivery schedule must not extend the delivery period beyond the time for delivery in the Government’s required delivery schedule as follows: REQUIRED DELIVERY SCHEDULE – All items within 21 days after date of contract award. Offers that propose delivery of a quantity under such terms or conditions that delivery will not clearly fall within the applicable required delivery period specified above, will be considered nonresponsive and rejected. If the offeror proposes no other delivery schedule, the desired delivery schedule above will apply. OFFEROR'S PROPOSED DELIVERY SCHEDULE: All items with _____ days after date of contract award. (b) Attention is directed to the Contract Award provision of the solicitation that provides that a written award or acceptance of offer mailed or otherwise furnished to the successful offeror results in a binding contract. The Government will mail or otherwise furnish to the offeror an award or notice of award not later than the day the award is dated. Therefore, the offeror shall compute the time available for performance beginning with the actual date of award, rather than the date the written notice of award is received from the Contracting Officer through the ordinary mails. However, the Government will evaluate an offer that proposes delivery based on the Contractor’s date of receipt of the contract or notice of award by adding (1) five calendar days for delivery of the award through the ordinary mails, or (2) one working day if the solicitation states that the contract or notice of award will be transmitted electronically. (The term “working day” excludes weekends and U.S. Federal holidays.) If, as so computed, the offered delivery date is later than the required delivery date, the offer will be considered nonresponsive and rejected. (End of Clause) FAR 52.211-16Variation in Quantity (APR 1984) (a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) below. (b) The permissible variation shall be limited to: 10 Percent increase 10 Percent decrease This increase or decrease shall apply to the total quantity of each CLIN. (End of Clause) DLAD 52.247-9012 Requirements for Treatment of Wood Packaging Material (WPM) (FEB 2007) (a) This clause only applies when wood packaging material (WPM) will be used to make shipments under this contract and/or when WPM is being acquired under this contract. (b) Definition. Wood packaging material (WPM) means wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frame and cleats. The definition excludes materials that have undergone a manufacturing process, such as corrugated fiberboard, plywood, particleboard, veneer, and oriented strand board (OSD). (c) All Wood Packaging Material(WPM) used to make shipments under DOD contracts and/or acquired by DOD must meet requirements of International Standards for Phytosanitary Measures (ISPM) 15, "Guidelines for Regulating Wood Packaging Materials in International Trade." DOD shipments inside and outside of the United States must meet ISPM 15 whenever WPM is used to ship DOD cargo. (1) All WPM shall comply with the official quality control program for heat treatment (HT) or kiln dried heat treatment (KD HT) in accordance with American Lumber Standard Committee, Incorporated (ALSC) Wood Packaging Material Program and WPM Enforcement Regulations (see http://www.alsc.org/). (2) All WPM shall include certification/quality markings in accordance with the ALSC standard. Markings shall be placed in an unobstructed area that will be readily visible to inspectors. Pallet markings shall be applied to the stringer or block on diagonally opposite sides of the pallet and be contrasting and clearly visible. All containers shall be marked on a side other than the top or bottom, contrasting and clearly visible. All dunnage used in configuring and/or securing the load shall also comply with ISPM 15 and be marked with an ASLC approved DUNNAGE stamp. (d) Failure to comply with the requirements of this restriction may result in refusal, destruction, or treatment of materials at the point of entry. The Agency reserves the right to recoup from the Contractor any remediation costs incurred by the Government. (End of Clause) FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes of Executive Orders–Commercial Items (Aug 2009) in paragraph (b) the following clauses apply: FAR 52.219-28Post Award Small Business Program Representation (MAR 2009) FAR 52.222-3 Convict Labor (JUN 2003) FAR 52.222-19Child Labor–Cooperation with Authorities and Remedies (FEB 2008) FAR 52.222-21 Prohibition of segregated facilities (FEB 1999) FAR 52.222-26 Equal Opportunity (MAR 2007) FAR 52.222-36 Affirmative Action for Workers with Disabilities (JUN 1998) FAR 52.222-37Employment Reports on Disabled Veterans and Veterans of the Vietnam Era, and Other Eligible Veterans (SEP 2006) FAR 52.225-13Restriction on Certain Foreign Purchases (JUN 2008) FAR 52.232-36Payment by Third Party (MAY 1999) FAR 52.247-64Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) DFARS 252.212-7001 Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items. (Jul 2009) The following additional clauses/provisions apply: DFARS 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (JAN 2009) DFARS 252.225-7036 Buy American Act–Free Trade Agreement–Balance of Payments Program ALT I (JUL 2009) DFARS 252.243-7002 Request for Equitable Adjustment (MAR 1998) DFARS 252.247-7023 Transportation of Supplies by Sea (MAY 2002) DFARS 252.247-7024 Notification of Transportation of Supplies by Sea (MAR 2000) FAR 52.212-1 Instructions to Offers-Commercial Items. Addenda to 52.212-1; the following paragraphs are hereby deleted from this provision: (d) products samples, (e) multiple offers and (h) multiple awards. OFFER SUBMISSION INSTRUCTIONS–Quotes must include the following items. Submission of a quote that does not contain all items requested below may result in elimination from consideration for award. 1. Quotations may be submitted in contractor format and shall include: (1) Company name, address, telephone number, e-mail address, and FAX number (2) Solicitation number (3) Unit Price and extended prices for all CLINS (4) Contractor DUNS Number and Commercial and Government Entity (CAGE) Code (5) Signed acknowledgements of amendments (applicable only if any amendments are issued against this solicitation) 2. Contractors are required to include a copy of the FAR provision 52.212-3-Offeror Representations and Certifications-Commercial Items and DFAR 252.212-7000-Offeror Representation and Certification-Commercial Items with its proposal or may indicate completion of the representations and certifications on the internet at http://orca.bpn.gov. Failure to include the certifications along with the price proposal or to complete the certifications on the internet may result in elimination from consideration for award. NOTE: To receive an award resulting from this solicitation, offerors MUST be registered in the Central Contractor Registration (CCR) database IAW FAR 52.212-1(k) and DFARS 204.1104. Registration may be done on line at: www.ccr.gov. DLAD 52.233-9000 AGENCY PROTESTS (SEP 1999) Companies protesting this procurement may file a protest 1) with the Contracting Officer, 2) with the General Accounting Office, or 3) pursuant to Executive Order No. 12979, with the Agency for a decision by the Activity’s Chief of the Contracting Office. Protests filed with the agency should clearly state that they are an “Agency Level Protest under Executive Order No. 12979.” (Note: DLA procedures for Agency Level Protests filed under Executive Order No. 12979 allow for a higher level decision on the initial protest than would occur with a protest to the Contracting Officer; this is not an appellate review of a Contracting Officer’s decision on a protest previously filed with the Contracting Officer). Absent a clear indication of the intent to file an agency level protest, protests will be presumed to be protests to the Contracting Officer. (End of Provision) DLAD 52.233-9001 DISPUTES: AGREEMENT TO USE ALTERNATIVE DISPUTE RESOLUTION (ADR) (JUN 2001) (a) The parties agree to negotiate with each other to try to resolve any disputes that may arise. If unassisted negotiations are unsuccessful, the parties will use alternative dispute resolution (ADR) techniques to try to resolve the dispute. Litigation will only be considered as a last resort when ADR is unsuccessful or has been documented by the party rejecting ADR to be inappropriate for resolving the dispute. (b) Before either party determines ADR inappropriate, that party must discuss the use of ADR with the other party. The documentation rejecting ADR must be signed by an official authorized to bind the contractor (see FAR 52.233-1, or for the agency, by the Contracting Officer, and approved at a level above the Contracting Officer after consultation with the ADR Specialist and with legal counsel (see DLA Directive 5145.1). Contractor personnel are also encouraged to include the ADR Specialist in their discussions with the Contracting Officer before determining ADR to be inappropriate. (c) If you wish to opt out of this clause, check here ( ). Alternate wording may be negotiated with the Contracting Officer. (End of Provision) 52.212-2 -- Evaluation -- Commercial Items (Jan 1999) - The Government intends to evaluate quotes in response to this quotation and will award one firm-fixed price contract to the responsible offeror whose quote represents the total overall lowest price for all CLINS. Therefore to be considered for award, a quote must be provided for all CLINS. 52.212-3 -- Offeror Representations and Certifications -- Commercial Items. (Aug 2009) An offeror shall complete only paragraphs (b) of this provision if the offeror has completed the annual representations and certificates electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (m) of this provision. (a) Definitions. As used in this provision-- “Emerging small business” means a small business concern whose size is no greater than 50 percent of the numerical size standard for the NAICS code designated. “Forced or indentured child labor” means all work or service— (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. “Inverted domestic corporation” means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). “Manufactured end product” means any end product in Federal Supply Classes (FSC) 1000-9999, except— (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. “Place of manufacture” means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. “Restricted business operations” means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate— (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. “Service-disabled veteran-owned small business concern”— (1) Means a small business concern— (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). “Small business concern” means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. “Veteran-owned small business concern” means a small business concern— (1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. “Women-owned business concern” means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. “Women-owned small business concern” means a small business concern -- (1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the Online Representations and Certifications Application (ORCA) website. (2) The offeror has completed the annual representations and certifications electronically via the ORCA website at http://orca.bpn.gov.After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications—Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (n) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted on ORCA.] (c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, for general statistical purposes, that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern. Note: Complete paragraphs (c)(6) and (c)(7) only if this solicitation is expected to exceed the simplified acquisition threshold. (6) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.]. The offeror represents that it [_] is, a women-owned business concern. (7) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: ___________________________________________ (8) Small Business Size for the Small Business Competitiveness Demonstration Program and for the Targeted Industry Categories under the Small Business Competitiveness Demonstration Program. [Complete only if the offeror has represented itself to be a small business concern under the size standards for this solicitation.] (i) [Complete only for solicitations indicated in an addendum as being set-aside for emerging small businesses in one of the designated industry groups (DIGs).] The offeror represents as part of its offer that it [_] is, [_] is not an emerging small business. (ii) [Complete only for solicitations indicated in an addendum as being for one of the targeted industry categories (TICs) or designated industry groups (DIGs).] Offeror represents as follows: (A) Offeror’s number of employees for the past 12 months (check the Employees column if size standard stated in the solicitation is expressed in terms of number of employees); or (B) Offeror’s average annual gross revenue for the last 3 fiscal years (check the Average Annual Gross Number of Revenues column if size standard stated in the solicitation is expressed in terms of annual receipts). (Check one of the following): Number of EmployeesAverage Annual Gross Revenues 50 or fewer$1 million or less 51-100$1,000,001-$2 million 101-250$2,000,001-$3.5 million 251-500$3,500,001-$5 million 501-750$5,000,001-$10 million 751-1,000$10,000,001-$17 million Over 1,000Over $17 million (9) [Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns, or FAR 52.219-25, Small Disadvantaged Business Participation Program—Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.] (i) General. The offeror represents that either— (A) It [_] is, [_] is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the database maintained by the Small Business Administration (PRO-Net), and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of each individual upon whom the certification is based does not exceed $750,000 after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); or (B) It [_] has, [_] has not submitted a completed application to the Small Business Administration or a Private Certifier to be certified as a small disadvantaged business concern in accordance with 13 CFR 124, Subpart B, and a decision on that application is pending, and that no material change in disadvantaged ownership and control has occurred since its application was submitted. (ii) Joint Ventures under the Price Evaluation Adjustment for Small Disadvantaged Business Concerns. The offeror represents, as part of its offer, that it is a joint venture that complies with the requirements in 13 CFR 124.1002(f) and that the representation in paragraph (c)(9)(i) of this provision is accurate for the small disadvantaged business concern that is participating in the joint venture. [The offeror shall enter the name of the small disadvantaged business concern that is participating in the joint venture: ________________.] (10) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that-- (i) It [_] is, [_] is not a HUBZone small business concern listed, on the date of this representation, on the List of Qualified HUBZone Small Business Concerns maintained by the Small Business Administration, and no material change in ownership and control, principal office, or HUBZone employee percentage has occurred since it was certified by the Small Business Administration in accordance with 13 CFR part 126; and (ii) It [_] is, [_] not a joint venture that complies with the requirements of 13 CFR part 126, and the representation in paragraph (c)(10)(i) of this provision is accurate for the HUBZone small business concern or concerns that are participating in the joint venture. [The offeror shall enter the name or names of the HUBZone small business concern or concerns that are participating in the joint venture: __________.] Each HUBZone small business concern participating in the joint venture shall submit a separate signed copy of the HUBZone representation. (d) Representations required to implement provisions of Executive Order 11246 -- (1) Previous contracts and compliance. The offeror represents that -- (i) It [_] has, [_] has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation; and (ii) It [_] has, [_] has not, filed all required compliance reports. (2) Affirmative Action Compliance. The offeror represents that -- (i) It [_] has developed and has on file, [_] has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR parts 60-1 and 60-2), or (ii) It [_] has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor. (e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $100,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made. (f) Buy American Act Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American Act – Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.” The terms “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American Act—Supplies.” (2) Foreign End Products: LINE ITEM NO.COUNTRY OF ORIGIN [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (g) (1) Buy American Act -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American Act -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms “Bahrainian, Moroccan, Omani, or Peruvian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “Israeli end product,” and ‘United States’ are defined in the clause of this solicitation entitled “Buy American Act--Free Trade Agreements--Israeli Trade Act.” (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled “Buy American Act—Free Trade Agreements—Israeli Trade Act”: Free Trade Agreement Country End Products (Other than Bahrainian or Moroccan End Products) or Israeli End Products: LINE ITEM NO.COUNTRY OF ORIGIN [List as necessary] (iii) The offeror shall list those supplies that are foreign end products (other than those listed in paragraph (g)(1)(ii) or this provision) as defined in the clause of this solicitation entitled “Buy American Act—Free Trade Agreements—Israeli Trade Act.” The offeror shall list as other foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.” Other Foreign End Products: LINE ITEM NO.COUNTRY OF ORIGIN [List as necessary] (iv) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (2) Buy American Act—Free Trade Agreements—Israeli Trade Act Certificate, Alternate I. If Alternate I to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products as defined in the clause of this solicitation entitled “Buy American Act—Free Trade Agreements—Israeli Trade Act”: Canadian End Products: Line Item No.: ___________________________________________ [List as necessary] (3) Buy American Act—Free Trade Agreements—Israeli Trade Act Certificate, Alternate II. If Alternate II to the clause at FAR 52.225-3 is included in this solicitation, substitute the following paragraph (g)(1)(ii) for paragraph (g)(1)(ii) of the basic provision: (g)(1)(ii) The offeror certifies that the following supplies are Canadian end products or Israeli end products as defined in the clause of this solicitation entitled ``Buy American Act--Free Trade Agreements--Israeli Trade Act'': Canadian or Israeli End Products: Line Item No.:Country of Origin: [List as necessary] (4) Trade Agreements Certificate. (Applies only if the clause at FAR 52.225-5, Trade Agreements, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(4)(ii) of this provision, is a U.S.-made or designated country end product as defined in the clause of this solicitation entitled “Trade Agreements.” (ii) The offeror shall list as other end products those end products that are not U.S.-made or designated country end products. Other End Products Line Item No.:Country of Origin: [List as necessary] (iii) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. For line items covered by the WTO GPA, the Government will evaluate offers of U.S.-made or designated country end products without regard to the restrictions of the Buy American Act. The Government will consider for award only offers of U.S.-made or designated country end products unless the Contracting Officer determines that there are no offers for such products or that the offers for such products are insufficient to fulfill the requirements of the solicitation. (h) Certification Regarding Responsibility Matters (Executive Order 12689). (Applies only if the contract value is expected to exceed the simplified acquisition threshold.) The offeror certifies, to the best of its knowledge and belief, that the offeror and/or any of its principals-- (1) [_] Are, [_] are not presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (2) [_] Have, [_] have not, within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a Federal, state or local government contract or subcontract; violation of Federal or state antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property; and (3) [_] Are, [_] are not presently indicted for, or otherwise criminally or civilly charged by a Government entity with, commission of any of these offenses enumerated in paragraph (h)(2) of this clause; and (4) [_] Have, [_] have not, within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied. (i) Taxes are considered delinquent if both of the following criteria apply: (A) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (B) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (ii) Examples. (A) The taxpayer has received a statutory notice of deficiency, under I.R.C. §6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appear rights. (B) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. §6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals Contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (C) The taxpayer has entered into an installment agreement pursuant to I.R.C. §6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (D) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. §362 (the Bankruptcy Code). (i) Certification Regarding Knowledge of Child Labor for Listed End Products (Executive Order 13126). [The Contracting Officer must list in paragraph (i)(1) any end products being acquired under this solicitation that are included in the List of Products Requiring Contractor Certification as to Forced or Indentured Child Labor, unless excluded at 22.1503(b).] (1) Listed End Product Listed End Product:Listed Countries of Origin: (2) Certification. [If the Contracting Officer has identified end products and countries of origin in paragraph (i)(1) of this provision, then the offeror must certify to either (i)(2)(i) or (i)(2)(ii) by checking the appropriate block.] [_] (i) The offeror will not supply any end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. [_] (ii) The offeror may supply an end product listed in paragraph (i)(1) of this provision that was mined, produced, or manufactured in the corresponding country as listed for that product. The offeror certifies that is has made a good faith effort to determine whether forced or indentured child labor was used to mine, produce, or manufacture any such end product furnished under this contract. On the basis of those efforts, the offeror certifies that it is not aware of any such use of child labor. (j) Place of manufacture. (Does not apply unless the solicitation is predominantly for the acquisition of manufactured end products.) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly— (1) [_] In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or (2) [_] Outside the United States. (k) Certificates regarding exemptions from the application of the Service Contract Act. (Certification by the offeror as to its compliance with respect to the contract also constitutes its certification as to compliance by its subcontractor if it subcontracts out the exempt services.) [The contracting officer is to check a box to indicate if paragraph (k)(1) or (k)(2) applies.] (1) [_] Maintenance, calibration, or repair of certain equipment as described in FAR 22.1003-4(c)(1). The offeror [_] does [_] does not certify that— (i) The items of equipment to be serviced under this contract are used regularly for other than Governmental purposes and are sold or traded by the offeror (or subcontractor in the case of an exempt subcontract) in substantial quantities to the general public in the course of normal business operations; (ii) The services will be furnished at prices which are, or are based on, established catalog or market prices (see FAR 22.1003-4(c)(2)(ii)) for the maintenance, calibration, or repair of such equipment; and (iii) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract will be the same as that used for these employees and equivalent employees servicing the same equipment of commercial customers. (2) [_] Certain services as described in FAR 22.1003-4(d)(1). The offeror [_] does [_] does not certify that— (i) The services under the contract are offered and sold regularly to non-Governmental customers, and are provided by the offeror (or subcontractor in the case of an exempt subcontract) to the general public in substantial quantities in the course of normal business operations; (ii) The contract services will be furnished at prices that are, or are based on, established catalog or market prices (see FAR 22.1003-4(d)(2)(iii)); (iii) Each service employee who will perform the services under the contract will spend only a small portion of his or her time (a monthly average of less than 20 percent of the available hours on an annualized basis, or less than 20 percent of available hours during the contract period if the contract period is less than a month) servicing the Government contract; and (iv) The compensation (wage and fringe benefits) plan for all service employees performing work under the contract is the same as that used for these employees and equivalent employees servicing commercial customers. (3) If paragraph (k)(1) or (k)(2) of this clause applies— (i) If the offeror does not certify to the conditions in paragraph (k)(1) or (k)(2) and the Contracting Officer did not attach a Service Contract Act wage determination to the solicitation, the offeror shall notify the Contracting Officer as soon as possible; and (ii) The Contracting Officer may not make an award to the offeror if the offeror fails to execute the certification in paragraph (k)(1) or (k)(2) of this clause or to contact the Contracting Officer as required in paragraph (k)(3)(i) of this clause. (l) Taxpayer identification number (TIN) (26 U.S.C. 6109, 31 U.S.C. 7701). (Not applicable if the offeror is required to provide this information to a central contractor registration database to be eligible for award.) (1) All offerors must submit the information required in paragraphs (l)(3) through (l)(5) of this provision to comply with debt collection requirements of 31 U.S.C. 7701(c) and 3325(d), reporting requirements of 26 U.S.C. 6041, 6041A, and 6050M, and implementing regulations issued by the Internal Revenue Service (IRS). (2) The TIN may be used by the government to collect and report on any delinquent amounts arising out of the offeror’s relationship with the Government (31 U.S.C. 7701(c)(3)). If the resulting contract is subject to the payment reporting requirements described in FAR 4.904, the TIN provided hereunder may be matched with IRS records to verify the accuracy of the offeror’s TIN.] (3) Taxpayer Identification Number (TIN). [_] TIN:_____________________. [_] TIN has been applied for. [_] TIN is not required because: [_] Offeror is a nonresident alien, foreign corporation, or foreign partnership that does not have income effectively connected with the conduct of a trade or business in the United States and does not have an office or place of business or a fiscal paying agent in the United States; [_] Offeror is an agency or instrumentality of a foreign government; [_] Offeror is an agency or instrumentality of the Federal Government; (4) Type of organization. [_] Sole proprietorship; [_] Partnership; [_] Corporate entity (not tax-exempt); [_] Corporate entity (tax-exempt); [_] Government entity (Federal, State, or local); [_] Foreign government; [_] International organization per 26 CFR 1.6049-4; [_] Other ____________________. (5) Common parent. [_] Offeror is not owned or controlled by a common parent: [_] Name and TIN of common parent: Name ____________________________________ TIN ______________________________________ (m) Restricted business operations in Sudan. By submission of its offer, the offeror certifies that the offeror does not conduct any restricted business operations in Sudan. (n) Prohibition on Contracting with Inverted Domestic Corporations. (1) Relation to Internal Revenue Code. A foreign entity that is treated as an inverted domestic corporation for purposes of the Internal Revenue Code at 26 U.S.C. 7874 (or would be except that the inversion transactions were completed on or before March 4, 2003), is also an inverted domestic corporation for purposes of 6 U.S.C. 395 and for this solicitation provision (see FAR 9.108). (2) Representation. By submission of its offer, the offeror represents that it is not an inverted domestic corporation and is not a subsidiary of one. (End of Provision) 252.212-7000 Offeror Representations and Certifications--Commercial Items. (Jun 2005) (a) Definitions. As used in this clause— (1) “Foreign person” means any person other than a United States person as defined in Section 16(2) of the Export Administration Act of 1979 (50 U.S.C. App. Sec. 2415). (2) “United States” means the 50 States, the District of Columbia, outlying areas, and the outer Continental Shelf as defined in 43 U.S.C. 1331. (3) “United States person” is defined in Section 16(2) of the Export Administration Act of 1979 and means any United States resident or national (other than an individual resident outside the United States and employed by other than a United States person), any domestic concern (including any permanent domestic establishment of any foreign concern), and any foreign subsidiary or affiliate (including any permanent foreign establishment) of any domestic concern which is controlled in fact by such domestic concern, as determined under regulations of the President. (b) Certification. By submitting this offer, the Offeror, if a foreign person, company or entity, certifies that it— (1) Does not comply with the Secondary Arab Boycott of Israel; and (2) Is not taking or knowingly agreeing to take any action, with respect to the Secondary Boycott of Israel by Arab countries, which 50 U.S.C. App. Sec. 2407(a) prohibits a United States person from taking. (c) Representation of Extent of Transportation by Sea. (This representation does not apply to solicitations for the direct purchase of ocean transportation services). (1) The Offeror shall indicate by checking the appropriate blank in paragraph (c)(2) of this provision whether transportation of supplies by sea is anticipated under the resultant contract. The term “supplies” is defined in the Transportation of Supplies by Sea clause of this solicitation. (2) Representation. The Offeror represents that it— ___________Does anticipate that supplies will be transported by sea in the performance of any contract or subcontract resulting from this solicitation. ___________Does not anticipate that supplies will be transported by sea in the performance of any contract or subcontract resulting from this solicitation. (3) Any contract resulting from this solicitation will include the Transportation of Supplies by Sea clause. If the Offeror represents that it will not use ocean transportation, the resulting contract will also include the Defense Federal Acquisition Regulation Supplement clause at 252.247-7024, Notification of Transportation of Supplies by Sea. (End of provision)
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DDC/SP3300-09-Q-0132/listing.html)
Record: SN01942793-W 20090906/090905002750-eb18bb1f59e487868dd45e34b855ccb6 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

81 -- CORRUGATED FIBERBOARD BOXES