SOLICITATION NOTICE
51 -- Painting Materials
- Notice Date
- 9/20/2009
- Notice Type
- Combined Synopsis/Solicitation
- Contracting Office
- American Embassy, Monrovia,
- ZIP Code
- 00000
- Solicitation Number
- SLI600-09-M-1253
- Response Due
- 9/23/2009
- Archive Date
- 3/22/2010
- Point of Contact
- Name: Emile Joseph, Title: Procurement Agent, Phone: 01123177054826, Fax: 01123177010370
- E-Mail Address
-
josephef@state.gov;
- Small Business Set-Aside
- N/A
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, in conjunction with FAR 13.5, as applicable, and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation number is SLI600-09-M-1253 and is issued as an invitation for bids (IFB), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular FAC 2005-34. The associated North American Industrial Classification System (NAICS) code for this procurement is 332212 with a small business size standard of 500.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on www.FedBid.com will start on the date this solicitation is posted and will end on 2009-09-23 17:00:00.0 Eastern Time or as otherwise displayed at www.FedBid.com. FOB Destination shall be Linden, NJ 07036 The Department of State requires the following items, Meet or Exceed, to the following: LI 001, Multi Purpose paint spray Gun, HvLp SprayersConventional Spray Gun, Fluid Delivery Type Suction Feed, Aluminum Body Construction, Adjustable Spray Pattern and Air Pressure, Fluid Nozzle Size.063 In /1.5 mm In), Standard Finish Quality, Paint Viscosity Optimum Range Very Low to High, Medium Fluid Delivery Speed, CFM @ PS Air Flow Requirements 9.9 @ 40 CFM @ PS, Pattern Size 10 In, Includes 1 Quart Aluminum Cup, 2, EA; LI 002, Blunt Nose Multi Tool, Full Size, Number of Tools 9, Number of Functions 14, Length Open 6.38 In, Closed Length 4.88 In, Stainless Steel, Sliding Plier Head With Push of Button, One-Hand Operation, Locking Components, Inboard Tool Access, Nylon Sheath, 10, EA; LI 003, Wooster Paint Brush, Size 1 Inches, Length 2 3/16 Inches, Thickness 7/16 Inches, Nylon/Polyester, Varnish, All Paints, Utility, 50, EA; LI 004, Wooster Paint Brush, Size 2 Inches, Length 2 11/16 Inches, Thickness 9/16 Inches, Nylon/Polyester, Varnish, All Paints, Utility, 50, EA; LI 005, Wooster Paint Brush, Size 1 1/2 Inches, Length 2 7/16 Inches, Thickness 1/2 Inches, Nylon/Polyester Angle Sash, All Paints, Utility, 50, EA; LI 006, Roller Spray Attachment, Length 9 In, For Use With 1TKJ8, 1TKJ9, 50, EA; LI 007, Protective Goggle, Frame Type Chemical Splash, Anti Fog, Lens Coating Splash, 20, EA; LI 008, Replacement Lens, Lens Color Mirror, Scratch Resistant, For Protective Eyewear (Protective Goggle Dark color), 20, EA; LI 009, Replacement Lens, Lens Color Mirror, Scratch Resistant, For Protective Eyewear (Protective Goggle Yellow color), 2, EA; LI 010, Spraying Protective Mask, 20, EA; LI 011, Joint Knife, Flexible, High Carbon Steel, Blade Width 6 In, Blade Length 3 5/16 In, Handle Material Nylon, Handle Length 4 In, Overall Length 7 5/16 In, For Painting, Drywall Mud, Spackling, And Like Materials, Recommended For Any Material That Needs Spreading And Smoothing, 25, EA; LI 012, Putty Knife, Blade Flexible, Blade Width 3 Inches, Handle Plastic/Rubber, 25, EA; LI 013, Plastic Joint Knife, Flexible, Polypropylene, Blade Width 8 In, Blade Length 4 1/8 In, Handle Material Polypropylene, Handle Length 3 1/2 In, Overall Length 7 5/8 In, Spreading and Scraping Muds, Pastes, Spackling, Grout, Recommended For Drywalling, Flooring, and Tiling Operations, Number of Pieces 1, 25, EA; LI 014, Natural Latex Glove, Size 10, Thickness 17 Mils, Length 12 Inches, Flocklined, Embossed Grip, Color Yellow, Pair, 50, EA; LI 015, Leather Palm Glove, Size Large, Heat and Cut Resistant Stitched Thread, Material Double Chrome Tanned Leather/Cotton Back/Fleece Lining Into Thumb and Forefinger, Rubberized Safety Cuff, Wing Thumb, Pair, 25, EA; LI 016, Mulitpurpose Paint Spray Hose, Fitting Size 3/8 Inch NPSM Female, Inside Diameter 3/8 Inch, Length 25 Feet, 2, EA; LI 017, Wooster Paint Brush,Length 2 15/16 Inches, Thickness 5/8 Inches, Nylon/Polyester, Angle Sash, All Paints, 25, EA; LI 018, Joint Knife, Flexible, High Carbon Steel, Blade Width 5 In, Blade Length 4 1/2 In, Handle Type Soft Grip w/Hammer Head, Handle Material DuraSoft w/Steel Hammer Head, Handle Length 4 1/2 In, Overall Length 9 In, For Painting, Drywall Mud, Spackling, And Like Materials, Recommended For Any Material That Needs Spreading And Smoothing, 25, EA; LI 019, Twinstep Ladder, Fiberglass, Ladder Height 8 Ft, Number of Steps 8, Bottom Width 25 3/4 In, Base Spread 67 In, Step Width 3 In, Non Slip Tread, Load Capacity 300 Max per Side Lb, ANSI Type 1A, 3, EA; LI 020, Ladder, Combination, 7800, Extended Ladder Height 6 Ft, Ladder Height 6 Ft, Max Working Length 9 1/2 Ft, Base Spread 46 1/2 In, Outside Shoe Base Width 23 1/4 In, Load Capacity 375 Lb, Fiberglass, Special Duty, Slip resistant pads, Rail Type Non-conductive, ANSI Type IAA, 3, EA; LI 021, Extension Ladder, D6200-2, Extended Ladder Height 20 Ft, Ladder Height 20 Ft, Max Working Length 17 Ft, Outside Shoe Base Width 19 In, Load Capacity 300 Lb, Fiberglass, Extra Heavy Duty, Dual action Shu-Lok, Rail Type Non-conductive, ANSI Type IA, 2, EA; LI 022, Extension Ladder, Heavy Duty, Extended Ladder Height 24 Ft, Ladder Height 12 Ft, Max Working Length 21 Ft, Outside Shoe Base Width 17 1/16 In, Load Capacity 300 Lb, Fiberglass, Swivel Safety Shoe, Rail Type Non Conductive, ANSI Type IA, 3, EA; LI 023, Heavy Duty Extension Pole, Size 8 to 16 Ft, Color Yellow, Aluminum Inner Pole, Fiberglass Outer Pole, Includes Universal Threaded Tip, 10, EA; LI 024, Extension Pole, Fixed, Length 5 Ft, Material Anodized Aluminum, For Use With Airless Spray Guns, 10, EA; LI 025, Metal Hand Box, Height 9 Inches, Width 20 Inches, Depth 8 Inches, 10, EA; LI 026, 4 Drawer Tool Chest, Storage 1935 Cubic Feet, Height 12 1/4 Inches, Width 26 Inches, Depth 12 Inches, 2, EA; For this solicitation, Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, FedBid, Inc. FedBid has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. Department of State is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.FedBid.com. There is no cost to register, review procurement data or make a bid on www.FedBid.com. Offerors that are not currently registered to use www.FedBid.com should proceed to www.FedBid.com to complete their free registration. Offerors that require special considerations or assistance may contact the FedBid Helpdesk at 877-9FEDBID (877-933-3243) or via email at clientservices@fedbid.com. Offerors may not artificially manipulate the price of a transaction on www.FedBid.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.FedBid.com process or to collude with the intent or effect of hampering the competitive www.FedBid.com process. Should offerors require additional clarification, notify the point of contact or FedBid at 877-9FEDBID (877-933-3243) or clientservices@fedbid.com. Use of FedBid: Buyers and Sellers agree to conduct this transaction through FedBid in compliance with the FedBid Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. In addition to providing pricing at www.FedBid.com for this solicitation, each offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) directly to the point of contact in the FBO notice, so that they are received at that email address no later than the closing date and time for this solicitation. The selected Offeror must comply with the following commercial item terms and conditions. FAR 52.212-1, Instructions to Offerors - Commercial, applies to this acquisition. The selected Offeror must submit a completed copy of the provision at 52.212-3, Offeror Representations and Certifications - Commercial Items. FAR 52.212-4, Contract Terms and Conditions - Commercial Items, applies to this acquisition. The following FAR clauses in paragraph (b) of FAR clause 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, will apply: 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of a FAR clause may be accessed electronically at http://www.acqnet.gov/far. CCR Requirement - Company must be registered on Central Contractor Registration (CCR) before an award could be made to them. If company is not registered in CCR, they may do so by going to CCR web site at http://www.ccr.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/State/FedBid.com/FedBid1/SLI600-09-M-1253/listing.html)
- Place of Performance
- Address: Linden, NJ 07036
- Zip Code: 07036
- Zip Code: 07036
- Record
- SN01963056-W 20090922/090920233529-3043e473b3cfe017f1e62acd2f9273d5 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |