SOURCES SOUGHT
J -- CGC BLOCK ISLAND 10 DRYDOCK REPAIR
- Notice Date
- 10/8/2009
- Notice Type
- Sources Sought
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102
- ZIP Code
- 23510-9102
- Solicitation Number
- CGCBLOCKISLAND10DDSOURCESSOUGHTNOTICE
- Archive Date
- 5/28/2010
- Point of Contact
- Louis J Romano, Phone: (757)628-4651, Tomeka Evans, Phone: 757-628-4666
- E-Mail Address
-
louis.j.romano@uscg.mil, tomeka.evans@uscg.mil
(louis.j.romano@uscg.mil, tomeka.evans@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- The U.S. Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns or for Service-Disabled Veteran-owned Small Business concerns (SDVOSB) or for Small Businesses. The small business size standard is less than 1,000 employees. The acquisition is to dry dock and repair the USCGC BLOCK ISLAND (WPB-1344), a 110 FOOT C CLASS PATROL BOAT. The homeport of the vessel is Atlantic Beach, North Carolina. The performance period is FORTY-TWO (42) calendar days and is expected to begin on or about 12 APRIL 2010 and end on or about 23 MAY 2010. This acquisition is geographically restricted to an area no greater than 500 nautical miles one-way or 1,000 nautical miles roundtrip, from the cutter's homeport of Atlantic Beach, NC. The scope of the acquisition is for the overhauling, renewing and repairing of various items aboard the USCGC BLOCK ISLAND (WPB-1344). This work will include, but is not limited to: renew steel shell plating, renew steel structural plating, renew aluminum structural plating, renew eroded aluminum welds, welding repairs - crack (steel), welding repairs - crack (aluminum), perform steel structural member repairs - 1" x 3" steel t-bar framing, clean and disinfect potable water tanks, clean and inspect fuel service tanks, clean and inspect fuel stowage and overflow tanks, clean and inspect grey water collection and holding tanks, preserve grey water collection and holding tank -partial, clean and inspect sewage collection and holding tank, preserve sewage collection and holding tanks - 100%, preserve sewage collection and holding tank - partial, clean grey water piping system, clean sewage piping system, clean and inspect oil and oily waste tanks, preserve oil and oily water tanks - partial, preserve oil and oily water tanks - 100%, overhaul duplex sea strainers, renew sea valves and pumps, inspect main diesel engine exhaust system, overhaul stabilizing fins, remove, inspect and reinstall propellers, remove, inspect and reinstall propeller shafts, repair propeller root erosion, overhaul mechanical shaft seal assemblies, inspect and maintain cathodic protection system, renew capastic fairing, renew water-lubricated propeller shaft bearings, remove, inspect and reinstall rudder assemblies, overhaul steering gear components, renew speed doppler, renew depth indicating transducer, preserve underwater body - partial, preserve underwater body - 100%, preserve forward peak compartment, preserve forward void, preserve forward auxiliary machinery space (CSMP 2009002), routine dry docking, provide temporary logistics, upgrade fire alarm system, install new grey water pumps and piping, improve ship's ventilation, install hot water on-demand unit, install new life rafts, install new searchlight, replace reverse osmosis watermakers, modify oily water separator piping, ultrasonic thickness measurements, renew insulation in various compartments, renew deck covering system(s), renew false bulkheads, preserve and preserve weather decks (CSMP 2009001), renew structural closures (CSMP 2009-005), renew pilothouse windows (CSMP 2008-002), renew various interior deck drains (CSMP 2009-007), renew latex terrazzo deck covering systems (CSMP 2009-009), fabricate and install new canopy, renew fuel transfer piping (CSMP 2009-006), composite labor rate, GFP report and lay days. All welding and brazing shall be accomplished by trained welders, who have been certified by the applicable regulatory code performance qualification procedures. At the present time, the acquisition is expected to be issued as a small business set aside. However, in accordance with FAR 19.1305 if your firm is HUBZone certified or a Service-Disabled Veteran-owned Small Business and intends to submit an offer on this acquisition, please respond by e-mail to Louis.J.Romano@.uscg.mil or by fax at (757) 628-4676. Questions may be referred to Mr. Louis Romano at (757) 628-4651. In your response you must include: (a) a positive statement of your intention to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and telephone numbers. At least two references are requested, but more are desirable. Your response is required by October 19 2009 at 1:00 PM, EST. Contractors are reminded that should this acquisition become a Hubzone set aside, FAR 52.219-3, Notice of Total Hubzone Set-aside, will apply, which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern. Contractors are reminded that should this acquisition become a Service-Disabled Veteran-owned Small Business Set-Aside, FAR 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside, will apply, which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone, Service Disabled Veteran-owned Small Business set aside or Small Business set-aside. Failure to submit all information requested may result in an unrestricted acquisition. A decision on whether this will be pursued as a HUBZone or SDVOSB small business set-aside, or small business set-aside, will be posted in the FedBizOpps website at http://www.fedbizopps.gov.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/CGCBLOCKISLAND10DDSOURCESSOUGHTNOTICE/listing.html)
- Place of Performance
- Address: The place of performance is geographically restricted to a facility within 500 nautical miles, 1,000 nautical miles round-trip, of the vessels homeport of Atlantic Beach, NC, Atlantic Beach, North Carolina, 28512-0237, United States
- Zip Code: 28512-0237
- Zip Code: 28512-0237
- Record
- SN01982649-W 20091010/091008235312-56ae8d3976550e7c95b3a785e926bd76 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |