SOURCES SOUGHT
34 -- High Speed twin spindle multi Axis CNC Lathes with X and Y axis milling capabili
- Notice Date
- 10/27/2009
- Notice Type
- Sources Sought
- Contracting Office
- US Army, Army Contracting Command, Joint Munitions and Lethality (JM&L) Contracting Center, Picatinny Arsenal, New Jersey 07806-5000
- ZIP Code
- 07806-5000
- Solicitation Number
- W15QKN-10-X-0422
- Response Due
- 11/10/2009
- Archive Date
- 12/10/2009
- Point of Contact
- Margaret Reed, Contract Specialist, (973)724-3273
- E-Mail Address
-
Margaret Reed
(margaret.b.reed@us.army.mil)
- Small Business Set-Aside
- N/A
- Description
- The U.S. Army, Army contracting Command (ACC) Joint Munitions and Lethality(JM&L) Contracting Center, Picatinny Arsenal, NJ 07806-5000, on behalf of the U.S. Army Armament Research Development and Engineering Center (ARDEC) is conducting market research to locate companies capable of providing the U.S. Government with High Speed, twin spindle Multi Axis CNC Lathes with X and Y axis milling capability with the following requirements: Technical Performance Requirements Max. Turning Diameter to exceed 14.00"Main Spindle Barfeed Work Capacity (min)3.0"Spindle Speed Range (main / sub)4,000 / 4,000 RPMY Axis Stroke(min)+- 2.00Spindle Torque(min)442 ft/lbMilling Horse Power (min)7.5 hpSpindle Horse Power (min)25 hpSpeed Synchronized SpindlesPhase Synchronized SpindlesCut off confirmationBoring bar capacity 1.750 MinRigid Tapping at All Live StationsFull Rotary C Axis Spindle (both spindles)1,000 p.s.i. High Pressure Coolant System10.0" Hydraulic Chuck on the Main SpindleLNS and manufacturers Bar Feed Interface (for existing and future barfeed equipment)Swing Over Bed to exceed36.40"Max. Turning Length to exceed27.70"Rapid Traverse Rate X & Z Axis (min)1,100 i.p.m.Positions Available for Live Tools (min)12Live tool stations shall have 3 diameter Face Mill Capacity and 1 diameter shank end mill capacityRotary Tool Spindle Speed (min)6000 rpmMinimum Spindle Indexing (both spindles)0.001 degree Cylindrical Interpolation ProgrammingPolar Coordinate Programming Canned CyclesTool Life ManagementSub ProgrammingSwing Down Manual Tool Presetter8 Hydraulic Chuck for Sub Spindle, Min.12 Position TurretOil Cooler for HeadstockAutomatic Lubrication SystemHigh Performance Direct Drive Spindle Motor (both spindles)Hand Scraped Box Way ConstructionSlant Bed ConstructionDirect Drive Live Tooling motorLive tool stations shall be capable of utilizing gear hobbing tooling from MD Tooling, IncTurning Tool Holder Package (Boring bars up to 2, OD tools 8pcs)Through Turret Coolant System (30 psi)Parts CatcherParts EjectorConversational ProgrammingCustom Macro ProgrammingDown loadable ProgramsBackground EditingHigh Speed Skip Function / read aheadLoad Meter DisplayRS 232 Interface Ethernet InterfaceTooling LibraryTool Path Plotting / Back PlottingColor Screen320 Meters Memory (min) 50 Megabyte User MemoryDirect Drive Milling SpindleTwo Year Parts And Labor Warranty For The Machine And ControlTwenty Four Hour Parts Shipment For A Down Machine GuaranteeFour (2) Student Enrollment training (operator / Programmer) Two (2) Student Enrollment training (Maintenance /Diagnostics)Full Machine EnclosuresFully Covered Bed And WaysShatter Proof Safety GlassExternal Chip ConveyorX Axis Coolant Through Milling Head (5 pieces)Z Axis Coolant Through Milling Head (5 pieces)Z Axis Dual Milling Head (2 pieces)S-30 Accu Length Collet Adapter (for main spindle)S-30 Accu Length Collet Adapter (for sub spindle)Freight And Rigging for All Components to be placed on Government specified floor space of B3150, at Picatinny Arsenal, NJ 07806. Companies are invited to indicate their interests and capabilities by providing specifications, brochures, manuals, reports, information pertaining to experience on previous projects, specific work previously performed or being performed, and any other specific and pertinent information as pertains to this particular area of procurement that would enhance our evaluation of the information submitted. All information is to be submitted via email at no cost or obligation to the Government; information provided will not be returned. Responses shall also indicate the size of the business entity; large or small IAW FAR 19.102, and a copy of the most recent ORCA certifications. Please provide the name of your company, address, POC, phone/fax number, and email address. TELEPHONE INQUIRIES WILL NOT BE ACCEPTED. The Government will accept written questions by email. Interested companies are encouraged to submit their capabilities/qualifications data no LATER than November 10, 2009. This is a Sources Sought/Market Survey Announcement and submissions will be used for informational and planning purposes only. This notice does not constitute a formal Request for Proposal (RFP)/Request for Quote (RFP), nor is the Government obligated to issue an RFP/RFQ. In addition, the Government does not intend to pay for any information provided under this notice. The Government is not obligated to notify respondents of the results of this survey. The point of contact for this action is Barbara Reed, Contract Specialist, CCJM-JA, (973) 724-3273, margaret.b.reed@us.army.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/USAMC/DAAE30/W15QKN-10-X-0422/listing.html)
- Record
- SN01992929-W 20091029/091027235003-496ec1b53fe9f32311d6a9ff8998c0b3 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |