SOLICITATION NOTICE
J -- Drydock USCGC Hammer (WLIC-75302)
- Notice Date
- 12/10/2009
- Notice Type
- Presolicitation
- NAICS
- 336611
— Ship Building and Repairing
- Contracting Office
- Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street, Suite 600, Norfolk, Virginia, 23510-9102
- ZIP Code
- 23510-9102
- Solicitation Number
- DD_Hammer_FY10
- Archive Date
- 12/30/2010
- Point of Contact
- Tracey M. Strawbridge, Phone: 7576284657
- E-Mail Address
-
tracey.strawbridge@uscg.mil
(tracey.strawbridge@uscg.mil)
- Small Business Set-Aside
- N/A
- Description
- The United States Coast Guard Surface Forces Logistics Center intends to issue a Commercial Request for Quote (RFQ) for DryDock Repairs to the USCGC HAMMER (WLIC-75302), a 75 Foot Construction Buoy Tender (WLIC-75302). The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Request for Quote (RFQ), on or about December 14, 2009. The RFQ will be issued via the Federal Business Opportunity (FEDBIZOPPS) web page at www.fbo.gov. Hard copies of the specification and solicitation will not be issued. It is incumbent upon contractors to monitor the FEDBIZOPPS web page for RFQ release and all subsequent amendments. FEDBIZOPPS also contains an option automatic notification service. THE ACQUISITION WILL BE SOLICITED AS A SMALL BUSINESS SET ASIDE. The acquisition is for DryDock repairs to the USCGC HAMMER (WLIC-75302) homeport in Mayport, FL. There is a geographic restriction for this drydock availability to an area no greater than 400 nautical miles from cutters homeport and no open water transits. The performance period will be one hundred and thirty-one (131) calendar days with a start date on or about 08 February 2010. The place of performance will be at the contractor's facility. The scope of the acquisition is for the overhauling, cleaning and repairing of various items aboard the USCGC HAMMER (WLIC-75302). This work will include, but is not limited to: (1-D) Perform Ultrasonic Thickness (UT) Measurements (2-D) Perform Ultrasonic Thickness Measurements Underwater Hull Plating Tender (3-D) Perform Ultrasonic Thickness Measurements Underwater Hull Plating Barge (4-D) Clean and Inspect Fuel Stowage and Overflow Tanks (5-D) Clean and Inspect Sewage Collection and Holding Tanks (6-D) Renew Depth Indicating Transducer (s) (7-D) Renew Sea Valves (8-D) Renew Fire Main Valves - Tender (9-D) Renew Bilge Valve - Tender (10-D) Clean and Inspect Sea Strainers - Barge (11-D) Clean and Inspect Sea Strainers - Tender (12-D) Protect Hydraulic ATON Crane (13-D) Preserve Spud and Spud Well Surfaces (14-D) Clean Grey Water Piping System (15-D) Clean & Repair Sewage Piping System (16-D) Inspect Various Deck Fittings (17-D) Preserve Buoy Deck (18-D) Preserve Underwater Body (Barge) 100% (19-D) Preserve Underwater Body 100% (20-O) Preserve Barge Freeboard 100% (21-O) Preserve Tender Freeboard 100% (22-D) Renew Cathodic Protection System - Barge (23-D) Renew Cathodic Protection System - Tender (24-D) Routine Drydocking Tender (25-D) Routine Drydocking - Barge (26-D) Provide Temporary Logistics (27-D) Install Ballast Ingots in Aft Steering Lazarette Space (28-D) Upgrade Steering System (29-D) Propulsion System Upgrade (30-D) Renew Structural Closures (Barge) (31-O) Renew Various Stuffing Tubes (32-D) Renew Windows (33-D) Renew Pilot House Windshield (34-D) Preserve Bilge Surfaces Barge (35-D) Renew Structural Framing - Barge (36-D) Renew Jetting Pump Mounting Plate (37-D) Install New Deck Covering System (38-D) Install New Deck Covering System (s) (A-O) Composite Labor Rate (B-D) GFP Report (Z-O) Laydays All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. All reference documents are available for viewing at 300 East Main Street, Suite 600, Norfolk, VA 23510-9102. Drawings are now available on CD-ROM. The CD-ROM sets are available for all cutters and will be free of charge to contractors upon request [ten days from solicitation issuance]. SFLC must have ten (10) days advance notice to complete a CD-ROM set of drawings. The CD-ROM(s) contain WINDOWS compliant raster/vector formats (e.g.*.DWF, etc). All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition, contact the Contracting Official listed below. Quotes are anticipated to be due on or about December 30, 2009, 1100 am Eastern Standard Time to: Commander, U.S. Coast Guard, SFLC/C&P1-MEC, 300 East Main Street, Suite 600, Norfolk, VA 23510-9102. Requests for Quotations and additional information requests may be faxed to (757) 628-4676, Attn: Tracey Strawbridge.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/COUSCGMLCA/DD_Hammer_FY10/listing.html)
- Place of Performance
- Address: Contractor's facility, United States
- Record
- SN02021299-W 20091212/091210235120-69d8e396d1bf7f88548e6d74adede84d (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |