MODIFICATION
99 -- Audio Visual Equipment and Installation
- Notice Date
- 12/17/2009
- Notice Type
- Modification/Amendment
- NAICS
- 334310
— Audio and Video Equipment Manufacturing
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, WR-ALC, WR-ALC/PK Acquisition Opportunities, 235 Byron St,, Warner Robins, Georgia, 31098-1611, United States
- ZIP Code
- 31098-1611
- Solicitation Number
- F3QCCM9322A001
- Archive Date
- 1/20/2010
- Point of Contact
- Ryan C. Byrd,
- E-Mail Address
-
ryan.byrd@robins.af.mil
(ryan.byrd@robins.af.mil)
- Small Business Set-Aside
- Service-Disabled Veteran-Owned Small Business
- Description
- Questions 2: 1) In a number of your locations where you are specifying flat panel displays, you also specify that a CATV feed will also be in those locations. I assume this means these displays must have a TV tuner included. Is that correct? Would you also want included TV tuners included in those locations where no CATV feed is specified? 2) Room 102. Is power and the CATV feed provided at the desired flat panel display location, or is the contractor required to provide these? 3) Room 108. Is power and the CATV feed provided at the desired flat panel display location? Is power provided at the projector location and the specified equipment location? You specify a computer connection at the conference room table. Is there empty conduit available to the floor box in which this wiring may be placed? If so, what size is the conduit? 4) Room 109. Is power and the CATV and CCTV feed provided at the desired flat panel display location? 5) Room 112. Is power and the CCTV feed provided at the desired flat panel display location? 6) Room 129. Is power and the CCTV feed provided at the desired flat panel display location? 7) Room 213. Is power and the CATV feed provided at the desired flat panel display location? Is power provided at the projector location and the specified equipment location? 8) Room 236. Is power and the CATV and CCTV feed provided at the desired flat panel display locations? Is power provided at the projector location and the specified equipment location? Are the 8 PC feeds located at desks? Or some other location(s)? Answers 2: 1) Yes, a turner is required for CATV locations. No turner required if there is no CATV source. 2) Per the AV SOW Photos, the power and CATV is provided. The contractor is not responsible for any power installation. 3) Per the AV SOW Photos, the power and CATV is provided. The contractor is not responsible for any power installation. There are empty conduits at all floor box locations. 4) Per the AV SOW Photos, the power and CATV is provided. The contractor is not responsible for any power installation. CCTV will be feed from a PC. 5) Power will be installed for monitor. CCTV feed will originate from a DVR in office. 6) Yes. The contractor is not responsible for any power installation. 7) Per the AV SOW Photos, the power and CATV is provided. The contractor is not responsible for any power installation. There are empty conduits at all floor box locations. 8) Per the AV SOW Photos, the power, CCTV and CATV is provided. The contractor is not responsible for any power installation. There are empty conduits at all floor box locations. All PC feeds will originate in the GCC cubicles.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/WRALC/F3QCCM9322A001/listing.html)
- Record
- SN02026915-W 20091219/091217235417-f7cc43b570a00e22314105ab347bc77b (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |