SOLICITATION NOTICE
34 -- Cotter Pin Assortment - RFQ QSDLA-W2-10-0943-SQA
- Notice Date
- 12/21/2009
- Notice Type
- Combined Synopsis/Solicitation
- NAICS
- 332722
— Bolt, Nut, Screw, Rivet, and Washer Manufacturing
- Contracting Office
- General Services Administration, Federal Acquisition Service (FAS), Southwest Supply Operations Center (QSDL), 819 Taylor St Room 6A00, Fort Worth, Texas, 76102, United States
- ZIP Code
- 76102
- Solicitation Number
- QSDLA-W2-10-0943-SQ
- Archive Date
- 1/19/2010
- Point of Contact
- Joshua Walker, Phone: 817-574-4241
- E-Mail Address
-
josh.walker@gsa.gov
(josh.walker@gsa.gov)
- Small Business Set-Aside
- N/A
- Description
- Solicitation for NSN 5315-00-598-5916 The Request for Quotation (RFQ) is for a proposed Standing Quote Agreement (SQA) IAW FAR 13.103 for purchases for a twelve month period from date of award, not to exceed $100,000 with annual reviews. Please see the RFQ for the complete requirements, offerors must meet the conditions in the RFQ to be considered for award. NSN: 5315-00-598-5916 COTTER PIN ASSORTMENT: The cotter pins shall be in accordance with American Society of Mechanical Engineers ASME B18.8.1 with the following characteristics: Type - Steel, carbon Plating - uncoated End - any style acceptable Dimensions - Refer to Table 3 and Table 4 within ASME B18.8.1 Unit of issue - AT (100 total cotter pins in one assortment) ASSORTMENT CONTENTS: QUANTITY SIZELENGTH 15 Each 1/16"1-1/2" 15 Each3/32"1/2" 15 Each 3/32"1-1/2" 5 Each 1/8"1/2" 5 Each 1/8"1" 20 Each 1/8"1-1/2" 5 Each 1/8"2" 15 Each 5/32"1" 5 Each 3/16"1-1/2" ASSORTMENT PACKAGING: The assortment shall be packaged into one plastic style, compartmentalized container, with a hinged lid that has a secure method of closure to prevent the contents from spilling or mixing when the container is turned upside down. Each individual compartment shall have the cotter pin size marked or referenced. PRODUCT CONFORMANCE. The products provided shall meet the salient characteristics of this description, conform to the producer's own drawings, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129. PREPARATION FOR DELIVERY: The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply: Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging: The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, “Guidelines for Regulating Wood Packaging Material in International Trade”. Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17. (09/09/09)
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/notices/bd3524ef090c95e1297929be2ff4df17)
- Record
- SN02028787-W 20091223/091221234636-bd3524ef090c95e1297929be2ff4df17 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |