SRCSGT | 36 | Request For Information (RFI) in regards to a NAVAIR requirement for a modified, commercially available 4-post, 3,000 ton hydraulic press intended for the swaging of Cross-Deck Pendants (CDPs) for the U.S. Navy.

FBO DAILY ISSUE OF DECEMBER 25, 2009 FBO #2953
SOURCES SOUGHT

36 -- Request For Information (RFI) in regards to a NAVAIR requirement for a modified, commercially available 4-post, 3,000 ton hydraulic press intended for the swaging of Cross-Deck Pendants (CDPs) for the U.S. Navy.

Notice Date: 12/23/2009
Notice Type: Sources Sought
NAICS: 333513 — Machine Tool (Metal Forming Types) Manufacturing
Contracting Office: Department of the Navy, Naval Air Systems Command, Naval Air Warfare Center Aircraft Division Lakehurst, Contracts Department, Hwy. 547 Attn:B562-3C, Lakehurst, New Jersey, 08733-5083
ZIP Code: 08733-5083
Solicitation Number: N68335-10-RFI-0147
Archive Date: 1/29/2010
Point of Contact: Letitia M Baker, Phone: 732-323-4406
E-Mail Address: letitia.baker@navy.mil
(letitia.baker@navy.mil)
Small Business Set-Aside: N/A
Description: THIS IS A REQUEST FOR INFORMATION ONLY. THERE IS NO SOLICITATION PACKAGE AVAILABLE AT THIS TIME. This is a Request For Information (RFI) in regards to a NAVAIR requirement for a modified, commercially available 4-post, 3,000 ton hydraulic press intended for the swaging of Cross-Deck Pendants (CDPs) for the U.S. Navy. NAVAIR Lakehurst, NJ seeks potential sources and no cost product information of commercially available hydraulic presses.This RFI is for planning purposes and information only and should not be construed as a solicitation for applications or an obligation on the part of the government. The government will not pay for the preparation of any information submitted or for the government’s use of that information. Background The swaging press shall be a 4-post, 3,000 ton hydraulic press used to swage terminals onto the ends of CDPs for both Navy and Air Force applications.The press shall be a new, commercially available model. A commercially available model is defined as the Contractor’s model which, on the date this solicitation is issued, has been designed, engineered, sold, or is being offered for sale through advertisements or the Contractor’s published catalogue or brochures. Products such as a prototype unit, pre-production model, or experimental unit do not qualify as meeting the requirements specified herein. However, the Government will consider changes to an existing commercially available product design that may improve the efficiency, accuracy, or productivity of the machine or decrease its operational costs. Information Requested Information in the following areas will assist NAVAIR Lakehurst in the development of its procurement strategy. Qualified vendors should provide the following: Product Literature: Brochures, catalogs, or other documents listing commercially available 3000+ ton presses; Detailed product descriptions of 3000+ ton presses; Long-Term Reliability and maintainability data; including the expected life (in years); Product drawings and photographs of 3000+ ton presses. Typical production plans and installation timeframes.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVAIR/N68335/N68335-10-RFI-0147/listing.html)
Place of Performance: Address: NAVAIR LAKEHURST, HWY547, LAKEHURST, New Jersey, 08733, United States; Zip Code: 08733
Record: SN02030604-W 20091225/091223234809-a8ed3164c9aa8ccb8469fefd57ce559d (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

36 -- Request For Information (RFI) in regards to a NAVAIR requirement for a modified, commercially available 4-post, 3,000 ton hydraulic press intended for the swaging of Cross-Deck Pendants (CDPs) for the U.S. Navy.