MODIFICATION
J -- Overhaul of one (1) three cubic yard round nose dredging bucket - Amendment 1
- Notice Date
- 1/21/2010
- Notice Type
- Modification/Amendment
- NAICS
- 811310
— Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance
- Contracting Office
- US Army Engineer District, Rock Island, P.O. Box 2004, Clock Tower Building, Attn: CEMVR-CT, Rock Island, IL 61204-2004
- ZIP Code
- 61204-2004
- Solicitation Number
- W912EK-10-T-0021
- Response Due
- 1/26/2010
- Archive Date
- 3/27/2010
- Point of Contact
- Brunson E. Grothus, Phone: 3097945241
- E-Mail Address
-
brunson.e.grothus@usace.army.mil
(brunson.e.grothus@usace.army.mil)
- Small Business Set-Aside
- Total Small Business
- Description
- Diagram of the bucket. Updated pictures of the bucket. Solicitation W912EK-10-T-0021 Amendment 0001. Offeror must acknowledge this amendment by completing Items 8 and 15 of the amendment and submit 1 copy of the amendment. Changes to the Specifications/Scope of Work are UNDERLINED below. Attached to this notice is: amendment 0001 which the offeror must acknowledge by completing Items 8 & 15 of the amendment (for the changes below), a diagram, and updated pictures of the bucket. Scope of Work for Solicitation W912EK-10-T-0021: Rebuild/Overhaul dredge bucket Dissemble and sandblast Replace guide roller pins and bearings Replace upper arm pins and bushings (2-eyelets, 3 inch dia.) Replace upper sheave pin and bushings (2-eyelets, 3 ½ inch dia.) Replace lower sheave pin and bushings (2-eyelets, 3 ½ inch dia.) Inspect all sheave grooves and bores Replace lower arm pins and bushings (12-eyelets, 3 inch dia.) Replace lower outside wear rings Replace main shaft(s) (2-eyelets, 5 inch dia.) Replace bowl arm bushings Replace main shaft (center section) bushings Build up lips Replace keepers and spacers as needed Gouge and weld all cracks Reassemble, clean, test, prime and paint Important Note #1: UPGRADE main shaft and lower arm pin areas to ASTRALOY PINS and MANGANESE BUSHINGS. Important Note #2: Replace eyelets or weld build-up and line-bore (as necessary) excessive wear on existing eyelets related to line items: #3, #4, #5, #7, and #9 above. Important Note #3: Loading and unloading assistance of the bucket will be available at the MRPO facility. Important Note #4: Contractors are welcome to visit our facility to access the bucket repairs anytime during our normal business hours (Monday thru Thursday, 7:00 a.m. to 5:30 p.m.). Specifications of round nose digging bucket: S/N #: RN-1450 S/O#: 51542 MAKE: HAWCO MODEL: RN-300 TYPE: 3 CU. YD. ROUNDNOSE BUCKET WEIGHT: 10,650 lb. +/- 3% CABLE: 1⅛" Requested completion date: Six to eight weeks after award of contract. Pick-up and delivery: Contractor must pick-up and deliver dredge bucket to be overhauled from: US Army Corps of Engineers Mississippi River Project Office 25549 182nd Street Pleasant Valley, IA 52767 Questions can be addressed to Jim Frederickson, Engineering Technician, at (309) 794-4569.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USA/COE/DACA25/W912EK-10-T-0021/listing.html)
- Place of Performance
- Address: US Army Engineer District, Rock Island P.O. Box 2004, Clock Tower Building, Attn: CEMVR-CT, Rock Island, Illinois, 61204-2004, United States
- Zip Code: 61204-2004
- Zip Code: 61204-2004
- Record
- SN02046898-W 20100123/100121235344-e06c6cd8ee8e32b7a5b9672c4fd9fe79 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |