AWARD | 68 | Compressed Gases | 04-Feb-10

FBO DAILY ISSUE OF FEBRUARY 04, 2010 FBO #2994
AWARD

68 -- Compressed Gases

Notice Date: 2/2/2010
Notice Type: Award Notice
NAICS: 325510 — Paint and Coating Manufacturing
Contracting Office: N00189 FISC NORFOLK, PORTSMOUTH NAVAL SHIPYARD ANNEX Building 153, 6th Floor Portsmouth, NH
ZIP Code: 00000
Solicitation Number: N0018910QPT50
Response Due: 1/26/2010
Archive Date: 5/2/2010
Point of Contact: Rene StPierre 207-438-3871
E-Mail Address: office
(rene.stpierre@navy.mil)
Small Business Set-Aside: N/A
Award Number: N0018910PPT50
Award Date: 2/2/2010
Awardee: AirGas-East Inc (DUNS 606601136)27 North Western DrSalem NH, 03079-4809
Award Amount: $92,855.00
Line Number: ALL
Description: This is a COMBINED SYNOPSIS/SOLICITATION for commercial items prepared in accordance with the information in FAR Subpart 12.6, using Simplified Acquisition Procedures under the test program for commercial items found at FAR 13.5, as supplemented with the additional information included in this notice. This announcement constitutes the only solicitation; a written solicitation will not be issued. PAPER COPIES OF THIS SOLICITATION WILL NOT BE AVAILABLE. This combined synopsis/solicitation SHALL be posted on both FEDBIZOPPS and NECO (https://www.neco.navy.mil/ ). The RFQ number is N00189-10-Q-PT50. This solicitation documents and incorporates provisions and clauses in effect through FAC 2005-38 and DFARS Change Notice 20091229. It is the responsibility of the contractor to be familiar with the applicable clauses and provisions. The clauses may be accessed in full text at these addresses: www.acqnet.gov/far and http://www.acq.osd.mil/dpap/dars/dfars/html/current/252201.htm. The NAICS code is 325120 and the Small Business Standard is 1000. This is a competitive, unrestricted action. The Portsmouth Naval Shipyard requests responses from qualified sources capable of providing: ITEM 0001: NITROGEN, CRYOGENIC, PROVIDE IN 165 LITER BULK CONTAINERS (4500CF) HIGH PRESSURE CYLINDERS, QTY 30 EA. ITEM 0002: OXYGEN TECHNICAL, PROVIDED IN DEWARS BULK CONTAINERS, QTY 24. ITEM 0003: ARGON, TECHNICAL, 99.98% BY VOLUME, UNIT OF ISSUE IS A 5850 CF DEWAR TANK, LIQUID, QTY 150. ITEM 0004: ARGON, TECHNICAL GAS, MIL-A-18455C, 99.985% BY VOLUME (MIN), SIZE: 197 CF, TYPE 1, QTY 1200 EA. ITEM 0005: PETROLEUM GAS, LIQUIFIED, GAS, PROPYLENE (FORMERLY MAPP), CYLINDER SIZE: 12 INCH DIAMETER X 60 LBS, QTY 10 EA. ITEM 0006: OXYGEN TECHNICAL, CYLINDER CONTAINS 200 CF, QTY 225. ITEM 0007: ACETYLENE, TECHNICAL, UNIT OF ISSUE CONTAINS 225 CF, QTY 30. ITEM 0008: ARGON (75%) AND CARBON DIOXIDE (25%) MIX, GAS MIX IN 243 CF CYLINDERS, CERTIFICATION THAT GAS MIXTURE PROPORTIONS ARE WITHIN THE TOLERANCES OF COMMERCIAL WELDING SOCIETY SPECIFICATIONS, QTY 100 EA. ITEM 0009: ARGON-OXYGEN GAS (M-2 GAS), 197 CF CYLINDER, (98%) ARGON, (2%) OXYGEN, CERTIFICATION IS THAT GAS MIXTURE PROPORTIONS ARE WITHIN THE TOLERANCES OF COMMERCIAL WELDING SOCIETY SPECIFICATIONS, QTY 100 EA. ITEM 0010: ARGON-CO2, (95%) ARGON, (5%) CO2, CERTIFICATION IS THAT GAS MIXTURE PROPORTIONS ARE WITHIN THE TOLERANCES OF COMMERCIAL WELDING SOCIETY SPECIFICATIONS, QTY 75 EA. ITEM 0011: HELIUM, TECHNICAL, GRADE A, CYLINDERS 217 CF, QTY 30 EA. ITEM 0012: HYDROGEN, TECHNICAL, CYLINDER CONTAINS 175 CF, QTY 20 EA. ITEM 0013: CYLINDER MAINTENANCE(SEE ATTACHMENT FOR MAINTANENCE TO BE INCLUDED IN COST). NOTE: PLEASE SEE ATTACHMENT FOR ALL MIL SPEC REQUIREMENTS FOR EACH ITEM. ITEMS 0001 THRU 0003 ARE TO INCLUDE THE COST OF RENTALS OF DEWAR CYLINDERS PER DAY. FOR VENDORS QUOTES TO BE CONSIDERED, VENDOR MUST BE ABLE TO DELIVER GAS ON A CONSISTANT WEEKLY BASIS AND IN CASES OF EMERGENCY DELIVERIES, VENDOR MUST BE ABLE TO DELIVER WITHIN 24 HOURS. PRICES FOR EMERGENCY DELIVERIES SHALL BE INCLUDED IN QUOTE. ALSO INCLUDED IN QUOTES VENDORS SHALL PROVIDE PRICES FOR MAINTENANCE TO GOVERNMENT OWNED CYLINDERS ACCORDING TO ATTACHMENT LISTED AS "CYLINDER MAINTENANCE". ALL QUOTES SHALL BE SUBMITTED IAW DESCRIPTIONS IN ATTACHMENT. THIS SOLICITATION IS FOR (1) BASE YEAR ONLY. THERE WILL BE A 10% VARIANCE ON ALL GASES FOR THIS PURCHASE ORDER(MAINTENANCE AND RENTALS NOT INCLUSIVE).Delivery Period of performance is 02/01/2010 THRU 01/31/2011. Responsibility and Inspection: unless otherwise specified in the order, the supplier is responsible for the performance of all inspection requirements and quality control. The following FAR provision and clauses are applicable to this procurement: 52.212-1, Instructions to Offerors - Commercial Items; 52.212-3 and its ALT I, Offeror Representations and Certifications - Commercial Items; 52.212-4, Contract Terms and Conditions - Commercial Items [list the clauses that apply]; and 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items 52.211-16, 52.242-15, 52.242-17, 52.247-34, 52.223-3, 52.223-11, 52.246-1, 52.252-2, 52.252-6, 52.253-1. Quoters are reminded to include a completed copy of 52.212-3 and its ALT I with quotes. All clauses shall be incorporated by reference in the order. Additional contract terms and conditions applicable to this procurement are: 252.212-7000, Offeror Representations and Certifications - Commercial Items and 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items! including. This announcement will close at 8:00 AM on January 25th, 2010. Contact Rene StPierre who can be reached at 207-438-3871 or email rene.stpierre@navy.mil. Oral communications are not acceptable in response to this notice. All responsible sources may submit a quote which shall be considered by the agency. 52.212-2, Evaluation - Commercial Items is applicable to this procurement. While price will be a significant factor in the evaluation of offers, the final contract award will be based on a combination of factors - a combination of price, technically acceptability and delivery capabilities Central Contractor Registration (CCR). Quoters must be registered in the CCR database to be considered for award. Registration is free and can be completed on-line at http://www.ccr.gov/. METHOD OF PROPOSAL SUBMISSION: The NECO website has a "submit bid" button next to the solicitation number. DO NOT use the "submit bid" button on NECO to submit your proposal. Fax no more than 10 pages to 207-438-1251 or email to: rene.stpierre@navy.mil or send to: Portsmouth Naval Shipyard, Bldg 153/6F Attn: Rene, Kittery ME, 03904 All quotes shall include price(s), FOB point, a point of contact, name and phone number, GSA contract number if applicable, business size, and payment terms. Quotes over 10 pages in total will not be accepted by facsimile. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. ATTACHMENT 16830 10CITEM NO. 0001JSECTIONBSTOCK NUMBER6830-LL-DM1-0021ITEM NAME CRYOGENIC NITROGENSPECIAL CHARACTERISTICSATTACHMENT ----- PAGE --PROVIDED IN 165 LITER BULK CONTAINERS (4500 CF) MAINE OXY CONTROL NO. 01304 OREQUAL AUGUST 1991-JUL Y 1992 HIGH PRESSURE CYLINDERSC DESCRIPTION/SPECIFICATIONSC.1 PROVIDE GAS OR GAS M IX IN ACCORDANCE WITH SECTION B OF THIS SCHEDULE.C.2 DATA REQUIREMENTS:C.2.1 MATERIAL SAFETY DATA SHEETS, DD-1423, SEQ. A001C.2.2 CERTIFICATE OF COMPLIANCE, DD-1423, SEQ. A002C.3 CERTIFICATION IS THAT GAS MIXTURE PROPORTIONS ARE WITHIN THETOLERANCES OF COMMERCIAL WELDING SOCIETY SPECIFICATIONSD PRESERVATION/PACKAGING/PACKINGD.1 D10 HAZARDOUS MATERIALE INSPECTION ACCEPTANCEE.1 E1 RESPONSIBILITY FOR INSPECTION.H SPECIAL PROVISIONSH.1 H12 HAZARDOUS MATERIAL IDENTIFICATION & MATERIAL SAFETY DATA.K SectionL SectionM Section ATTACHMENT 26830 3BITEM NO. 0002SECTION B ~"STOCK NUMBER6830-LL-DM1-0903ITEM NAME OXYGEN, TECHNICALSPECIAL CHARACTERISTICSPROVIDED IN DEWARS BULK CONTAINERSSOURCE: AIR SUPPLY, SALEM, NHC DESCRIPTION/SPECIFICATIONSC.1 PROVIDE GAS IN ACCORDANCE WITH FED. SPEC. BB-O-925A, SECTION 6.2ORDERING DATA AS FOLLOWS:(A) "OXYGEN,TECHNICAL, GAS AND LIQUID", BB-O-925A, DTD 22 AUG 61(B) TYPE I(C) AS PER SECTION B OF THIS SCHEDULE.(D) GOVERNMENT WILL FURNISH CYLINDERS(E) STD COMMERCIAL PRACTICE(F) MARKED IN ACCORDANCE WITH SECTION 5.2C.2 DATA REQUIREMENTS:C.2.1 MATERIAL SAFETY DATA SHEET REQUIRED. SEE EXHIBIT A, 001423SEQUENCE A001.PRESERVATION/PACKAGING/PACKING0.1 010 HAZARDOUS MATERIALE INSPECTION ACCEPTANCEE.1 E1 RESPONSIBILITY FOR INSPECTIONH SPECIAL PROVISIONSH.1 H12 HAZARDOUS MATERIAL IDENTIFICATION & MATERIAL SAFETY DATAK SectionL SectionM Section ATTACHMENT 36830 1ABCITEM NO. 0003SECTION BSTOCK NUMBER6830-LL-DM1-0882ATTACHMENT-'-----ITEM NAME ARGON, TECHNICAL, 99.98% BY VOLUMESPECIAL CHARACTERISTICSUNIT OF ISSUE IS A 5850 CF DEWAR TANKFORM: LIQUIDC DESCRIPTION/SPECIFICATIONSC.1 PROVIDE ARGON IN ACCORDANCE WITH MIL-A-18455. SECTION 6.2C.2 CYLINDERS ARE TO BE RENTED FROM THE CONTRACl"OR.C.3 DATA REQUIREMENTS:C.3.1 SAFETY DATA SHEETS, SEE EXHIBIT A, SEQUENCE A001C.3.2 CERT.OF QUALITY CONF (NIPROP), SEE EXHIBIT A, SEQUENCE A002C.3.3 CERTIFICATION MUST INDICATE THE NUMBER OF DEWARS;LOT NUMBER; ANALYTICAL RESULTS FOR EACH DEWAR/SERIALNUMBER; AND A SENTENCE STATING THAT THE DEWARS WEREPROCESSED AND FILLED IN ACCORDANCE WITH MIL-A-18455C.C.3.4 EACH DEWAR TO HAVE A PERFORATED THREE SECTION TAG ATTACHEDDENOTING: FULUIN USE/EMPTY. TAG TO HAVE PERFORATED LINESBETWEEN EACH STATEMENT.D PRESERVATION/PACKAGING/PACKINGD.1 BULK ARGON TO BE SUPPLIED IN 5850 CUBIC FOOT DEWARS WITH WHEELS,CONTRACTOR OWNED.D.2 D10 HAZARDOUS MATERIALE INSPECTION ACCEPTANCEE.1 E1 RESPONSIBILITY FOR INSPECTIONH SPECIAL PROVISIONSH.1 H12 HAZARDOUS MATERIAL IDENTIFICATION & MATERIAL SAFETY DATAK SectionL SectionATTACHMENT 46830 lAITEM NO. 0004SECTION B.,STOCK NUMBER6830-00-169-0779CONTRACTATTACHMENTITEM NAME ARGON, TECHNICAL GAS, MIL-A-18455CSPECIAL CHARACTERISTICS99.985 PERCENT BY VOLUME (MIN), SIZE:197 CU FT., TYPE 1C DESCRIPTION/SPECIFICATIONSC.l PROVIDE ARGON IN ACCORDANCE WITH MIL-A-18455C, PARAGRAPH 6.2(ORDERING DATA):(A) ARGON, TECHNICAL, MIL-A-18455C, DTD 23 DEC 86(B) SEE SECTION B(C) N/A(D) N/A \(E) SEE SECTION 3.3.2 OF MIL-A-18455C(F) N/A(G) N/A(H) N/A(I) N/A(J) PACKING AS PER COMMERCIAL STD PRACTICE(K) N/A(L) MARKING SHALL BE AS FOLLOWS:PRODUCT NAMESPECIFICATION NUMBER WITH REVISION LETTER:TYPE DESIGNATION:STOCK NUMBERNAME OF MANUFACTURER:NAME OF CONTRACTOR IF DIFFERENT FORM THE MANUFACTURER:DATA OF MANUFACTURER:LOT NUMBER:ARGON CYLINDERS MUST BE TAGGED WITH THE FILL PLANT, PRODUCT, DATEFILLED, CONTAINER NUMBER, AND NAME OF FILLER.C.2 DATA REQUIREMENTS:C.2.1 SAFETY DATA SHEETS, SEE EXHIBIT A, SEQUENCE AOOlC.2.2 CERTIFICATE OF COMPLIANCE, SEE EXHIBIT A, SEQUENCE A002C.2.2.A ARGON CYLINDERS MUST BE TAGGED WITH THE FILL PLANT,PRODUCT, DATE FILLED, CONTAINER NUMBER AND NAME OF FILLER.WRITTEN CERTIFICATION MUST BE FORWARDED FOR EACH DELIVERY,VERIFYING THAT ALL REQUIREMENTS OF PARA 4(AND BELOW MODIFICATIONS)OF MIL-A-18455C HAVE BEEN MET. CERTIFICATION MUSTALSO INDICATE THE NUMBER OF CYLINDERS/SERIAL NUMBERS AND ASTATEMENT SAYING CYLINDERS WERE PROCESSED AND FILLED INACCORDANCE WITH THE APPLICABLE MIL-SPEC.C.2.2.B MODIFICATIONS TO PARAGRAPH 4 OF MIL-A-18455C TOPAGE ATTACHMENT 56830 10CITEM NO. 0005SECTION B:STOCK NUMBER6830-LL-DM 1-0068ITEM NAME PETROLEUM GAS, LIQUEFIEDSPECIAL CHARACTERISTICS----- PAGEGAS, PROPYLENE (FORMERLY MAPP) CYL SIZE:12"DIAM X 60 LBS (NSN 8120-00-350-5477),SOURCEMAINE OXY/SPEC AIR GASES & TECHNOLOGIES, AUBURN, ME CAGE=8D536, POC:DENNIS SHEAC DESCRIPTION/SPECIFICATIONSC.1 PROVIDE GAS OR GAS MIX IN ACCORDANCE WITH SEtTION B OF THIS SCHEDULE.C.2 DATA REQUIREMENTS:C.2.1 MATERIAL SAFETY DATA SHEETS, DD-1423, SEQ. A001C.2.2 CERTIFICATE OF COMPLIANCE, DD-1423, SEQ. A002C.3 CERTIFlcATION IS THAT GAS MIXTURE PROPORTIONS ARE WITHIN THETOLERANCES OF COMMERCIAL WELDING SOCIETY SPECIFICATIONSD PRESERVATION/PACKAGINGIPACKINGD.1 D10 HAZARDOUS MATERIALE INSPECTION ACCEPTANCE. E.1 E1 RESPONSIBILITY FOR INSPECTION.H SPECIAL PROVISIONSH.1 H12 HAZARDOUS MATERIAL IDENTIFICATION & MATERIAL SAFETY DATA.K SectionL SectionM Section ATTACHMENT 66830 3BITEM NO. 0006SECTION B.", "-STOCK NUMBER6830-00-169-0805ITEM NAME OXYGEN, TECHNICALSPECIAL CHARACTERISTICSCYLINDER CONTAINS 200 CU FTC DESCRIPTION/SPECIFICATIONSC.1 PROVIDE GAS IN ACCORDANCE WITH FED. SPEC. BB-Q-925A, SECTION 6.2ORDERING DATA AS FOLLOWS:(A) "OXYGEN,TECHNICAL, GAS AND LIQUID", BB-O-925A, [lTD 22 AUG 61(B) TYPE I(C) AS PER SECTION B OF THIS SCHEDULE.(D) GOVERNMENT WILL FURNISH CYLINDERS(E) STD CQMMERCIAL PRACTICE(F) MARKED IN ACCORDANCE WITH SECTION 5.2C.2 DATA REQUIREMENTS:C.2.1 MATERIAL SAFETY DATA SHEET REQUIRED. SEE EXHIBIT A, DD1423SEQUENCE A001.D PRESERVATION/PACKAGING/PACKINGD.1 D10 HAZARDOUS MATERIALE INSPECTION ACCEPTANCEE.1 E1 RESPONSIBILITY FOR INSPECTIONH SPECIAL PROVISIONSH.1 H12 HAZARDOUS MATERIAL IDENTIFICATION & MATERIAL SAFETY DATAK SectionL SectionM Section ATTACHMENT 76830 3AITEM NO. 0007SECTIONS'STOCK NUMBER6830-00-264-6751ITEM NAME ACETYLENE,TECHNICALSPECIAL CHARACTERISTICSUNIT OF ISSUE CONTAINS 225 CU FTC DESCRIPTION/SPECIFICATIONS----------C.1 PROCURE GAS IN ACCORDANCE WITH FEDERAL SPECIFICATION BB-A-106B,SECTION 6.2, ORDERING DATA AS FOLLOWS:(A) "ACETYLENE, TECHNICAL, DISSOLVED", FEDERAL SPECIFICATIONBB-A-106B, DATED 22 APRIL 1971.(B) GRADE B(C) GOVERNMENT OWNED CYLINDERS WILL BE PROVIDED(D) N/A(E) PARAGRAPH 3.3.2 OF BB-A-106B APPLIES.(F) PARAGRAPH 5.1.1 OF BB-A-106B APPLIES.C.2 DATA REQUIREMENTS:C.2.1 MATERIAL SAFETY DATA SHEET REQUIRED. SEE EXHIBIT A001,DD-1423, SEQ A001.D PRESERVATIONIPACKAGING/PACKINGD.1 D10 HAZARDOUS MATERIALE INSPECTION ACCEPTANCEE.1 E1 RESPONSIBILITY FOR INSPECTIONH SPECIAL PROVISIONSH.1 H12 HAZARDOUS MATERIAL IDENTIFICATION & MATERIAL SAFETY DATAK SectionL SectionM Section ATTACHMENT 86830 10CITEM NO. 0008SECTION B,.STOCK NUMBER6830-01-094-0029ITEM NAME ARGON (75%) AND CARBON DIOXIDE (25%) MIXSPECIAL CHARACTERISTICSGAS MIX IN 243 CUBIC FOOT CYLINDERSCERTIFICATION IS THAT GAS MIXTURE PROPORTIONS ARE WITHIN THE TOLERANCES OFCOMMERCIAL WELDING SOCIETY SPECIFICATIONSC DESCRIPTION/SPECIFICATIONSC.1 PROVIDE GAS OR GAS MIX IN ACCORDANCE WITH SECTION B OF THIS SCHEDULE.C.2 DATA REQUIREMENTS:C.2.1 MATERIAL SAFETY DATA SHEETS, DD-1423, SEQ. AOO1C.2.2 CERTIFICATE OF COMPLIANCE, DD-1423, SEQ. A002C.3 CERTIF1CATION IS THAT GAS MIXTURE PROPORTIONS ARE WITHIN THETOLERANCES OF COMMERCIAL WELDING SOCIETY SPECIFICATIONSD PRESERVATION/PACKAGING/PACKINGD.1 D10 HAZARDOUS MATERIALE INSPECTION ACCEPTANCEE.1 E1 RESPONSIBILITY FOR INSPECTION.H SPECIAL PROVISIONSH.1 H12 HAZARDOUS MATERIAL IDENTIFICATION & MATERIAL SAFETY DATA.K SectionL SectionM Section---~-~~~~~-~-~~~ ATTACHMENT 96830 1ITEM NO. 0009SECTION B"STOCK NUMBER6830-LL-DM1-0878ITEM NAME ARGON-OXYGEN GAS (M-2 GAS)SPECIAL CHARACTERISTICS197 CU.FT. CYLINDER98% ARGON, 2.% OXYGENCERTIFICATION IS THAT GAS MIXTURE PROPORTIONS ARE WITHIN THE TOLERANCES OFCOMMERCIAL WELDING SOCIETY SPECIFICATIONSC DESCRIPTION/SPECIFICATIONSC.l PROVIDE GAS MIX IN ACCORDANCE WITH SECTION B OF THIS SCHEDLEC.2 DATA REQUIREMENTS:C.2.1 MATERIAL SAFETY DATA SHEET REQUIRED. SEE EXHIBIT A, 001423SEQU~NCE A001.C.2.2 GOVERNMENT OWNED CYLINDERSC.2.3 COC REQUIRED. SEE EXHIBIT A. 001423SEQUENCE A002PRESERVATION/PACKAGING/PACKING0.1 010 HAZARDOUS MATERIALE INSPECTION ACCEPTANQEE.l E1 RESPONSIBILITY FOR INSPECTIONH SPECIAL PROVISIONS'H.l H12 HAZARDOUS MATERIAL IDENTIFICATION & MATERIAL SAFETY DATAK SectionL SectionM Section ATTACHMENT 106830 10CITEM NO. 0010SECTION B..STOCK NUMBER6830-LL-DM 1-0078ITEM NAME GAS, 95% ARGON & 5% C02SPECIAL CHARACTERISTICSSOURCE: AIRGAS EAST INC.CERTIFICATION IS THAT GAS MIXTURE PROPORTIONS ARE WITHIN THE TOLERANCES OFCOMMERCIAL WELDING SOCIETY SPECIFICATIONSC DESCRIPTION/SPECIFICATIONSC.1 PROVIDE GAS OR GAS MIX IN ACCORDANCE WITH SEOTION B OF THIS SCHEDULE.C.2 DATA REQUIREMENTS:C.2.1 MATERIAL SAFETY DATA SHEETS, DD-1423, SEQ. A001C.2.2 CERTIFICATE OF COMPLIANCE, DD-1423, SEQ. AOO2C.3 CERTIFtCATION IS THAT GAS MIXTURE PROPORTIONS ARE WITHIN THETOLERANCES OF COMMERCIAL WELDING SOCIETY SPECIFICATIONSD PRESERVATION/PACKAGING/PACKINGD.1 D10 HAZARDOUS MATERIALE INSPECTION ACCEPTANCEE.1 E1 RESPONSIBILITY FOR INSPECTION.H SPECIAL PROVISIONSH.1 H12 HAZARDOUS MATERIAL IDENTIFICATION & MATERIAL SAFETY DATA.K SectionL SectionM Section ATTACHMENT 116830 3CITEM NO. 0011SECTION 8,STOCK NUMBER6830-00-660-0027ITEM NAME HELlUM,TECH.SPECIAL CHARACTERISTICSGRADE AUNIT PACKAGE:217 CFC DESCRIPTION/SPECI FICATIONSC.1 PROVIDE HELIUM IN ACCORDANCE WITH FEDERAL SPEC. BB-H-1168C GRADE A,SECTION 6.2 ORDERING DATA AS FOLLOWS: \A} "HELlUM,TECHNICAL", BB-H-1168C, DTD 3 AUG 2000.B} AS PER SECTION B OF THIS SCHEDULEC} AS PER SECTION 5.2D} N/A \E} N/AC.2 DATA REOURIEMENTS:C.2.1 MATERIAL SAFETY DATA SHEETS,DD-1423,SEO. A001D PRESERVATION/PACKAGING/PACKINGD.1 D10 HAZARDOUS MATERIALE INSPECTION ACCEPTANCEE.1 E1 RESPONSIBILITY FOR INSPECTIONH SPECIAL PROVISIONSH.1 H12 HAZARDOUS MATERIAL IDENTIFICATION & MATERIAL SAFETY DATAK SectionL SectionM Section ATTACHMENT 126830 2BAAITEM NO. 0012SECTION Bl,.STOCKNUMBER6830-00-169-0792ITEM NAME HYDROGEN, TECHNICALSPECIAL CHARACTERISTICSATIACHMENTCYLINDER CONTAINS 175 CUBIC FEET.C DESCRIPTION/SPECIFICATIONSC.1 PROVIDE HYDROGEN IN ACCORDANCE WITH BB-H-886C, SECTION 6.2ORDERING DATA AS FOLLOWS:A) "HYDROGEN", BB-H-886C, DATED APRIL 10,1978B) GRADE AC) CYLINDERSD) SEE SECTION B OF THIS SCHEDULE.E) GOVERNMENT OWNED CYLINDERSF) DOT APPROVED CYLINDERSG) N/AH) MARKED IN ACCORDANCE WITH SECTION 5.3 OF BB-H-886C.2 DATA REQUIREMENTS;C.2.1 MATERIAL SAFETY DATA SHEETS, DD-1423, SEQ. AOO1D PRESERVATION/PACKAGING/PACKINGD.1 D10 HAZARDOUS MATERIALE INSPECTION ACCEPTANCEE.1 E1 RESPONSIBILITY FOR INSPECTIONH SPECIAL PROVISIONSH.1 H12 HAZARDOUS MATERIAL IDENTIFICATION & MATERIAL SAFETY DATAK SectionL SectionM Section Maintenance Requirements: (Please list prices for each service per each cylinder) 1a. Valve (when old valve is returned to agency)1b. Valve (when contractor does not return to agency)2. Dip (siphon) tube, including collar3. Collar4. Valve Hood 5. Safety Device Cap6. Outlet Cap or Plug, Plastic7. Outlet Cap or Plug with Chain and Clip8. Fangible Disc9. Fusible Plug -In Valve10. Fusible Plug-In Cylinder11. Valve Stem12. Valve Packing13. Grit Blast or Caustic Strip, Prime and Paint, One Color14. Each Additional Color,15. Wire Brush, Prime and Paint One Color16. Each Additional Color17. Stenciling, Miscellaneous (Applicable to Stenciling Required on Each Cylinder That Do Not Require Stripping or Painting)18. Hydrostatic Test Cylinders Including De-Valving, Testing Indent New Test Date, Drying Interior and Resetting Valve19. Modified Hydrostatic Test, Where Permitted by Specifications20. Visual Testing in Lieu of Hydrostatic Testing Where Permitted by Specifications21. Dehydrating Cylinders (Except in Conjunction with Hydrostatic Testing)22. Internally Clean Cylinders Prior to Hydrostatic Test, Include Purge, Cleaning and Drying23. Internally Clean Contaminated Cylinders as Required by Applicable Specifications to Include Pressure Test Evacuation Purge as Many as Required, Pressure Analyze to Ensure Contamination is Removed, 24. Removal of Fractured, Rusted, or Damaged Parts, to Include Caps, Valves, Plugs, or Collar25. Stamping Nomenclature of Gas on Valve
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSUP/N00189PNH/N0018910QPT50/listing.html)
Record: SN02056124-W 20100204/100202235927-d69bebc9f2b2a97031ed564282e54c62 (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

68 -- Compressed Gases