Loren Data's SAM Daily™

FBO DAILY ISSUE OF MARCH 10, 2010 FBO #3028
SOLICITATION NOTICE

16 -- Overhaul of T700-GE-401C Engine, Modules and Components - Engine SF1449 - GE Engine SOW - GE Engine Solicitation

Notice Date

3/8/2010
 

Notice Type

Combined Synopsis/Solicitation
 

NAICS

336412 — Aircraft Engine and Engine Parts Manufacturing
 

Contracting Office

Department of Homeland Security, United States Coast Guard (USCG), Commanding Officer, USCG Aviation Logistics Center, HU25, HH65, H60J, C130, ESD, IOD, ISD, CASA or ALD, Elizabeth City, North Carolina, 27909-5001, United States
 

ZIP Code

27909-5001
 

Solicitation Number

HSCG38-10-R-J00006
 

Point of Contact

David E. Tanner, Phone: 2523356413, Sherri D Roche, Phone: 252-335-6566
 

E-Mail Address

David.E.Tanner@uscg.mil, sherri.d.roche@uscg.mil
(David.E.Tanner@uscg.mil, sherri.d.roche@uscg.mil)
 

Small Business Set-Aside

N/A
 

Description

GE Engine Overhaul Solicitation GE Engine Overhaul SOW GE Engine Overhaul SF1449 NOTICE FOR FILING AGENCY PROTESTS United States Coast Guard Ombudsman Program It is the policy of the United States Coast Guard (USCG) to issue solicitations and make contract awards in a fair and timely manner. The Ombudsman Program for Agency Protests (OPAP) was established to investigate agency protest issues and resolve them without expensive and time-consuming litigation. OPAP is an independent reviewing authority that is empowered to grant a prevailing protester essentially the same relief as the General Accountability Office (GAO). Interested parties are encouraged to seek resolution of their concerns within the USCG as an Alternative Dispute Resolution (ADR) forum, rather than filing a protest with the GAO or some external form. Interested parties may seek resolution of their concerns informally or opt to file a formal agency protest with the contracting officer or Ombudsman. Informal forum with the Ombudsman. Interested parties who believe a specific USCG procurement is unfair or otherwise defective should first direct their concerns to the cognizant contracting officer. If the contracting officer is unable to satisfy the concerns, the interested party is encouraged to contact the USCG Ombudsman for Agency Protests. Under this informal process, the agency is not required to suspend contract award performance. Use of an informal forum does not suspend any time requirement for filing a protest with the agency or other forum. In order to ensure a timely response, interested parties should provide the following information to the Ombudsman: solicitation/contract number, contracting office, contracting officer, and solicitation closing date (if applicable). Formal Agency Protest with the Ombudsman. Prior to submitting a formal agency protest, protesters must first use their best efforts to resolve their concerns with the contracting officer through open and frank discussions. If the protester's concerns are unresolved, an independent review is available by the Ombudsman. The protester may file a formal agency protest to either the contracting officer or as an alternative to that, the Ombudsman under the OPAP program. Contract award or performance will be suspended during the protest period unless contract award or performance is justified in writing, for urgent and compelling reasons or is determined in writing to be in the best interest of the Government. The agency's goal is to resolve protests in less than 35 calendar days from the date of filing. Protests shall include the information set forth at FAR 33.103. If the protester fails to submit the required information, resolution of the protest may be delayed or the protest may be dismissed. This will not preclude re-filing of the protest to meet the requirement. To be timely, protests must be filed within the period specified in FAR 33.103(e). Formal protests filed under the OPAP program should be submitted to: Department of Homeland Security United States Coast Guard (CG-9131) Ombudsman Program for Agency Protests 1900 Half Street, SW, Room 11-0602 Washington D.C. 20593-0001 Telephone 202-372-3695 Fax: 202-475-3904 This is a combined synopsis/solicitation for the overhaul of commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; firm-fixed-price proposals are being requested. This requirement will be satisfied using commercial acquisition procedures specified in FAR Parts 12 and 15. This Request for Proposal (RFP) HSCG38-10-R-J00006 incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-38. The applicable North American Industry Classification Standard Code is 336412. The small business size standard is 1000 employees. This is an unrestricted solicitation. The USCG anticipates award of a firm fixed price requirements contract to a responsible contractor that can provide the overhaul capabilities. Drawings and specifications are not available and cannot be furnished by the Government Provide pricing and delivery for the overhaul of the following items. Estimated quantities are identified in the Schedule of Supplies below. SCHEDULE OF INDEFINITE DELIVERY REQUIREMENTS MATERIAL OVERHAUL CONTRACT LINE ITEMS - BASE YEAR DATE OF AWARD THROUGH ONE YEAR FROM DATE OF AWARD CLIN NIIN/ PART NUMBER/NOMEN EST QTY UNIT EST UNIT PRICE EST EXT PRICE 0001 NSN 2840 01 318 5538 4 EA _____ _____ P/N 6064T25G01 T700 ENGINE 0002 UNUSUAL DAMAGE EVAL EA _____ _____ 0003 SCRAP EA _____ _____ 0004 NSN 2840 01 317 6673 19 EA _____ _____ P/N 6064T26G01 COLD SECTION MODULE 0005 UNUSUAL DAMAGE EVAL EA _____ _____ 0006 SCRAP EA _____ _____ 0007 NSN 2840 01 366 0337 or NSN 2840 01 353 8343 35 EA _____ _____ P/N 6900T93G02 or P/N 6900T93G01 COMP,AXIAL 0008 UNUSUAL DAMAGE EVAL EA _____ _____ 0009 SCRAP EA _____ _____ 0010 NSN 2840 01 316 9791 30 EA _____ _____ P/N 6064T27G01 POWER TURBINE MODULE 0011 UNUSUAL DAMAGE EVAL EA _____ _____ 0012 SCRAP EA _____ _____ 0013 NSN 2840 01 305 6951 6 EA _____ _____ P/N 6071T04G02 STAGE 1, TURBINE NOZZLE 0014 UNUSUAL DAMAGE EVAL EA _____ _____ 0015 SCRAP EA _____ _____ 0016 NSN 2840 01 439 1684, 3 EA _____ _____ P/N 6058T13G12 STAGE 3, NOZZLE,DUCT and AIRSEAL 0017 UNUSUAL DAMAGE EVAL EA _____ _____ 0018 SCRAP EA _____ _____ 0019 NSN 2840 01 366 0532 4 EA _____ _____ P/N 6071T55G05 DIFFUSER MIDFRAME, CASE (3),GAS TURBINE 0020 UNUSUAL DAMAGE EVAL EA _____ _____ 0021 SCRAP EA _____ _____ 0020 NSN 2840 01 304 4302 20 EA _____ _____ P/N 6064T54G08 COMBUSTION CHAMBER 0023 UNUSUAL DAMAGE EVAL EA _____ _____ 0024 SCRAP EA _____ _____ 0025 NSN 4320 01 295 1989 3 EA _____ _____ P/N 5034T11P05 LUBE PUMP 0026 UNUSUAL DAMAGE EVAL EA _____ _____ 0027 SCRAP EA _____ _____ 0028 NSN 2840 01 102 6090 Modify to NSN 2840 01 473 3556 3 EA _____ _____ P/N 6043T35G01 Modify to P/N 5125T92G01 POWER TURBINE SHAFT 0029 UNUSUAL DAMAGE EVAL EA _____ _____ 0030 SCRAP EA _____ _____ 0031 NSN 2840 01 473 3556, 4 EA _____ _____ P/N 5125T92G01 POWER TURBINE SHAFT 0032 UNUSUAL DAMAGE EVAL EA _____ _____ 0033 SCRAP EA _____ _____ 0034 NSN 2840 01 143 9991 1 EA _____ _____ P/N 6053T29G01 SWIRL FRAME 0035 UNUSUAL DAMAGE EVAL EA _____ _____ 0036 SCRAP EA _____ _____ 0037 NSN 2840 01 301 8172 1 EA _____ _____ P/N 6039T56G05 SHAFT ASSY, A-SUMP 0038 UNUSUAL DAMAGE EVAL EA _____ _____ 0039 SCRAP EA _____ _____ 0040 NSN 2840 01 314 8595 5 EA _____ _____ P/N 5074T79G10 HMU, FUEL CONTROL 0041 UNUSUAL DAMAGE EVAL EA _____ _____ 0042 SCRAP EA _____ _____ 0043 NSN 2915 01 301 5661 or NSN 2915 01 332 2469 Modify to NSN 2915 01 492 3907 5 EA _____ _____ P/N 4046T52G21 or P/N 4046T52G27 Modify to P/N 4046T52G37 HMU, FUEL CONTROL 0044 UNUSUAL DAMAGE EVAL EA _____ _____ 0045 SCRAP EA _____ _____ 0046 NSN 2915 01 492 3907 10 EA _____ _____ P/N 4046T52G37 HMU FUEL CONTROL 0047 UNUSUAL DAMAGE EVAL EA _____ _____ 0048 SCRAP EA _____ _____ 0049 NSN 2915 01 304 4299 10 EA _____ _____ P/N 4045T30G07 INJECTOR ASSY 0050 UNUSUAL DAMAGE EVAL EA _____ _____ 0051 SCRAP EA _____ _____ 0052 NSN 2840 01 287 1316 5 EA _____ _____ P/N 6039T19G07 GEARBOX, ACCESSORY 0053 UNUSUAL DAMAGE EVAL EA _____ _____ 0054 SCRAP EA _____ _____ 0055 NSN 2995 01 313 0691 5 EA _____ _____ P/N 4046T28G15 VALVE ASSY, ANTI-ICE 0056 UNUSUAL DAMAGE EVAL EA _____ _____ 0057 SCRAP EA _____ _____ 0058 NSN 2995 01 294 9867 12 EA _____ _____ P/N 4046T28G14 VALVE ASSEMBLY,ANTI 0059 UNUSUAL DAMAGE EVAL EA _____ _____ 0060 SCRAP EA _____ _____ 0061 NSN 2995 01 309 1391 10 EA _____ _____ P/N 4046T28G16 VALVE ASSY, ANTI-ICE 0062 UNUSUAL DAMAGE EVAL EA _____ _____ 0063 SCRAP EA _____ _____ 0064 NSN 2915 01 120 8717 Modify to 2915 01 HS1 9178 15 EA _____ _____ P/N 3033T33G02 Modify to P/N 3033T33G03 FUEL BOOST PUMP 0065 UNUSUAL DAMAGE EVAL EA _____ _____ 0066 SCRAP EA _____ _____ 0067 NSN 2915 01 HS1 9178 35 EA _____ _____ P/N 3033T33G03 FUEL BOOST PUMP 0068 UNUSUAL DAMAGE EVAL EA _____ _____ 0069 SCRAP EA _____ _____ 0070 NSN 2995 01 305 6942 Modify to NSN 2995 01 460 1334 5 EA _____ _____ P/N 5066T38G04 Modify to, P/N 5066T38G07 or P/N 5066T38G08 VALVE ASSY, ANTI-ICE 0071 UNUSUAL DAMAGE EVAL EA _____ _____ 0072 SCRAP EA _____ _____ 0073 NSN 2995 01 460 1334 25 EA _____ _____ P/N 5066T38G07 or P/N 5066T38G08 VALVE ASSY, ANTI-ICE 0074 UNUSUAL DAMAGE EVAL EA _____ _____ 0075 SCRAP EA _____ _____ 0076 NSN 2840 01 312 4806 Modify to NSN 2840 01 HS1 4501 3 EA _____ _____ P/N 6071T19G02 Modify to P/N 6071T19G01 ACFT SEALS, CDP SEALS 0077 UNUSUAL DAMAGE EVAL EA _____ _____ 0078 SCRAP EA _____ _____ 0079 NSN 2840 01 HS1 4501 5 EA _____ _____ P/N 6071T19G01 ACFT SEALS, CDP SEALS 0080 UNUSUAL DAMAGE EVAL EA _____ _____ 0081 SCRAP EA _____ _____ 0082 NSN 2915 01 462 3670 1 EA _____ _____ P/N 3046T17G02 OVERSPEED DRAIN VALVE 0083 UNUSUAL DAMAGE EVAL EA _____ _____ 0084 SCRAP EA _____ _____ 0085 NSN 2840 01 370 3011 or NSN 2840 01 445 5423 or NSN 2840 01 445 5422 5 EA _____ _____ Modify to NSN 2840 01 476 1840 P/N 6082T04G06 or P/N 6082T04G13 or P/N 6082T04G14 Modify to P/N 6082T04G16 MATCHED ASSY/GG ROTOR 0086 UNUSUAL DAMAGE EVAL EA _____ _____ 0087 SCRAP EA _____ _____ 0088 NSN 2840 01 476 1840 25 EA _____ _____ P/N 6082T04G16 MATCHED ASSY/GG ROTOR 0089 UNUSUAL DAMAGE EVAL EA _____ _____ 0090 SCRAP EA _____ _____ 0091 NSN 2840 01 304 0917 Modify to NSN 2840 01 362 4935 2 EA _____ _____ P/N 6058T13G10 Modify to P/N 6058T13G11 or P/N 4922T80G01 STG. 3 NOZZLE DUCT & AIR SEAL 0092 UNUSUAL DAMAGE EVAL EA _____ _____ 0093 SCRAP EA _____ _____ 0094 NSN 2840 01 362 4935 2 EA _____ _____ P/N 6058T13G11 or P/N 4922T80G01 either P/N accepted STG. 3 NOZZLE DUCT and AIR SEAL 0095 UNUSUAL DAMAGE EVAL EA _____ _____ 0096 SCRAP EA _____ _____ 0097 NSN 2915 01 HS1 3688 3 EA _____ _____ P/N 6044T78G04 OVERSPEED DRAIN VALVE 0098 UNUSUAL DAMAGE EVAL EA _____ _____ 0099 SCRAP EA _____ _____ 0100 HOURLY RATE EA _____ _____ CONTRACT LINE ITEMS - OPTION PERIOD ONE ONE YEAR PERIOD FOLLOWING THE BASE YEAR CLIN NIIN/ PART NUMBER/NOMEN EST QTY UNIT EST UNIT PRICE EST EXT PRICE 1001 NSN 2840 01 318 5538 4 EA _____ _____ P/N 6064T25G01 T700 ENGINE 1002 UNUSUAL DAMAGE EVAL EA _____ _____ 1003 SCRAP EA _____ _____ 1004 NSN 2840 01 317 6673 19 EA _____ _____ P/N 6064T26G01 COLD SECTION MODULE 1005 UNUSUAL DAMAGE EVAL EA _____ _____ 1006 SCRAP EA _____ _____ 1007 NSN 2840 01 366 0337 or NSN 2840 01 353 8343 20 EA _____ _____ P/N 6900T93G02 or P/N 6900T93G01 COMP,AXIAL 1008 UNUSUAL DAMAGE EVAL EA _____ _____ 1009 SCRAP EA _____ _____ 1010 NSN 2840 01 316 9791 20 EA _____ _____ P/N 6064T27G01 POWER TURBINE MODULE 1011 UNUSUAL DAMAGE EVAL EA _____ _____ 1012 SCRAP EA _____ _____ 1013 NSN 2840 01 305 6951 6 EA _____ _____ P/N 6071T04G02 STAGE 1, TURBINE NOZZLE 1014 UNUSUAL DAMAGE EVAL EA _____ _____ 1015 SCRAP EA _____ _____ 1016 NSN 2840 01 439 1684, 3 EA _____ _____ P/N 6058T13G12 STAGE 3, NOZZLE,DUCT and AIRSEAL 1017 UNUSUAL DAMAGE EVAL EA _____ _____ 1018 SCRAP EA _____ _____ 1019 NSN 2840 01 366 0532 4 EA _____ _____ P/N 6071T55G05 DIFFUSER MIDFRAME, CASE (3),GAS TURBINE 1020 UNUSUAL DAMAGE EVAL EA _____ _____ 1021 SCRAP EA _____ _____ 1020 NSN 2840 01 304 4302 20 EA _____ _____ P/N 6064T54G08 COMBUSTION CHAMBER 1023 UNUSUAL DAMAGE EVAL EA _____ _____ 1024 SCRAP EA _____ _____ 1025 NSN 4320 01 295 1989 3 EA _____ _____ P/N 5034T11P05 LUBE PUMP 1026 UNUSUAL DAMAGE EVAL EA _____ _____ 1027 SCRAP EA _____ _____ 1028 NSN 2840 01 102 6090 Modify to NSN 2840 01 473 3556 3 EA _____ _____ P/N 6043T35G01 Modify to P/N 5125T92G01 POWER TURBINE SHAFT 1029 UNUSUAL DAMAGE EVAL EA _____ _____ 1030 SCRAP EA _____ _____ 1031 NSN 2840 01 473 3556, 4 EA _____ _____ P/N 5125T92G01 POWER TURBINE SHAFT 1032 UNUSUAL DAMAGE EVAL EA _____ _____ 1033 SCRAP EA _____ _____ 1034 NSN 2840 01 143 9991 1 EA _____ _____ P/N 6053T29G01 SWIRL FRAME 1035 UNUSUAL DAMAGE EVAL EA _____ _____ 1036 SCRAP EA _____ _____ 1037 NSN 2840 01 301 8172 1 EA _____ _____ P/N 6039T56G05 SHAFT ASSY, A-SUMP 1038 UNUSUAL DAMAGE EVAL EA _____ _____ 1039 SCRAP EA _____ _____ 1040 NSN 2840 01 314 8595 5 EA _____ _____ P/N 5074T79G10 HMU, FUEL CONTROL 1041 UNUSUAL DAMAGE EVAL EA _____ _____ 1042 SCRAP EA _____ _____ 1043 NSN 2915 01 301 5661 or NSN 2915 01 332 2469 Modify to NSN 2915 01 492 3907 5 EA _____ _____ P/N 4046T52G21 or P/N 4046T52G27 Modify to P/N 4046T52G37 HMU, FUEL CONTROL 1044 UNUSUAL DAMAGE EVAL EA _____ _____ 1045 SCRAP EA _____ _____ 1046 NSN 2915 01 492 3907 10 EA _____ _____ P/N 4046T52G37 HMU FUEL CONTROL 1047 UNUSUAL DAMAGE EVAL EA _____ _____ 1048 SCRAP EA _____ _____ 1049 NSN 2915 01 304 4299 10 EA _____ _____ P/N 4045T30G07 INJECTOR ASSY 1050 UNUSUAL DAMAGE EVAL EA _____ _____ 1051 SCRAP EA _____ _____ 1052 NSN 2840 01 287 1316 5 EA _____ _____ P/N 6039T19G07 GEARBOX, ACCESSORY 1053 UNUSUAL DAMAGE EVAL EA _____ _____ 1054 SCRAP EA _____ _____ 1055 NSN 2995 01 313 0691 5 EA _____ _____ P/N 4046T28G15 VALVE ASSY, ANTI-ICE 1056 UNUSUAL DAMAGE EVAL EA _____ _____ 1057 SCRAP EA _____ _____ 1058 NSN 2995 01 294 9867 12 EA _____ _____ P/N 4046T28G14 VALVE ASSEMBLY,ANTI 1059 UNUSUAL DAMAGE EVAL EA _____ _____ 1060 SCRAP EA _____ _____ 1061 NSN 2995 01 309 1391 10 EA _____ _____ P/N 4046T28G16 VALVE ASSY, ANTI-ICE 1062 UNUSUAL DAMAGE EVAL EA _____ _____ 1063 SCRAP EA _____ _____ 1064 NSN 2915 01 120 8717 Modify to 2915 01 HS1 9178 15 EA _____ _____ P/N 3033T33G02 Modify to P/N 3033T33G03 FUEL BOOST PUMP 1065 UNUSUAL DAMAGE EVAL EA _____ _____ 1066 SCRAP EA _____ _____ 1067 NSN 2915 01 HS1 9178 35 EA _____ _____ P/N 3033T33G03 FUEL BOOST PUMP 1068 UNUSUAL DAMAGE EVAL EA _____ _____ 1069 SCRAP EA _____ _____ 1070 NSN 2995 01 305 6942 Modify to NSN 2995 01 460 1334 5 EA _____ _____ P/N 5066T38G04 Modify to, P/N 5066T38G07 or P/N 5066T38G08 VALVE ASSY, ANTI-ICE 1071 UNUSUAL DAMAGE EVAL EA _____ _____ 1072 SCRAP EA _____ _____ 1073 NSN 2995 01 460 1334 25 EA _____ _____ P/N 5066T38G07 or P/N 5066T38G08 VALVE ASSY, ANTI-ICE 1074 UNUSUAL DAMAGE EVAL EA _____ _____ 1075 SCRAP EA _____ _____ 1076 NSN 2840 01 312 4806 Modify to NSN 2840 01 HS1 4501 3 EA _____ _____ P/N 6071T19G02 Modify to P/N 6071T19G01 ACFT SEALS, CDP SEALS 1077 UNUSUAL DAMAGE EVAL EA _____ _____ 1078 SCRAP EA _____ _____ 1079 NSN 2840 01 HS1 4501 5 EA _____ _____ P/N 6071T19G01 ACFT SEALS, CDP SEALS 1080 UNUSUAL DAMAGE EVAL EA _____ _____ 1081 SCRAP EA _____ _____ 1082 NSN 2915 01 462 3670 1 EA _____ _____ P/N 3046T17G02 OVERSPEED DRAIN VALVE 1083 UNUSUAL DAMAGE EVAL EA _____ _____ 1084 SCRAP EA _____ _____ 1085 NSN 2840 01 370 3011 or NSN 2840 01 445 5423 or NSN 2840 01 445 5422 5 EA _____ _____ Modify to NSN 2840 01 476 1840 P/N 6082T04G06 or P/N 6082T04G13 or P/N 6082T04G14 Modify to P/N 6082T04G16 MATCHED ASSY/GG ROTOR 1086 UNUSUAL DAMAGE EVAL EA _____ _____ 1087 SCRAP EA _____ _____ 1088 NSN 2840 01 476 1840 15 EA _____ _____ P/N 6082T04G16 MATCHED ASSY/GG ROTOR 1089 UNUSUAL DAMAGE EVAL EA _____ _____ 1090 SCRAP EA _____ _____ 1091 NSN 2840 01 304 0917 Modify to NSN 2840 01 362 4935 2 EA _____ _____ P/N 6058T13G10 Modify to P/N 6058T13G11 or P/N 4922T80G01 STG. 3 NOZZLE DUCT & AIR SEAL 1092 UNUSUAL DAMAGE EVAL EA _____ _____ 1093 SCRAP EA _____ _____ 1094 NSN 2840 01 362 4935 2 EA _____ _____ P/N 6058T13G11 or P/N 4922T80G01 either P/N accepted STG. 3 NOZZLE DUCT and AIR SEAL 1095 UNUSUAL DAMAGE EVAL EA _____ _____ 1096 SCRAP EA _____ _____ 1097 NSN 2915 01 HS1 3688 3 EA _____ _____ P/N 6044T78G04 OVERSPEED DRAIN VALVE 1098 UNUSUAL DAMAGE EVAL EA _____ _____ 1099 SCRAP EA _____ _____ 1100 HOURLY RATE EA _____ _____ CONTRACT LINE ITEMS - OPTION PERIOD TWO ONE YEAR PERIOD FOLLOWING OPTION PERIOD ONE CLIN NIIN/ PART NUMBER/NOMEN EST QTY UNIT EST UNIT PRICE EST EXT PRICE 2001 NSN 2840 01 318 5538 4 EA _____ _____ P/N 6064T25G01 T700 ENGINE 2002 UNUSUAL DAMAGE EVAL EA _____ _____ 2003 SCRAP EA _____ _____ 2004 NSN 2840 01 317 6673 19 EA _____ _____ P/N 6064T26G01 COLD SECTION MODULE 2005 UNUSUAL DAMAGE EVAL EA _____ _____ 2006 SCRAP EA _____ _____ 2007 NSN 2840 01 366 0337 or NSN 2840 01 353 8343 20 EA _____ _____ P/N 6900T93G02 or P/N 6900T93G01 COMP,AXIAL 2008 UNUSUAL DAMAGE EVAL EA _____ _____ 2009 SCRAP EA _____ _____ 2010 NSN 2840 01 316 9791 20 EA _____ _____ P/N 6064T27G01 POWER TURBINE MODULE 2011 UNUSUAL DAMAGE EVAL EA _____ _____ 2012 SCRAP EA _____ _____ 2013 NSN 2840 01 305 6951 6 EA _____ _____ P/N 6071T04G02 STAGE 1, TURBINE NOZZLE 2014 UNUSUAL DAMAGE EVAL EA _____ _____ 2015 SCRAP EA _____ _____ 2016 NSN 2840 01 439 1684, 3 EA _____ _____ P/N 6058T13G12 STAGE 3, NOZZLE,DUCT and AIRSEAL 2017 UNUSUAL DAMAGE EVAL EA _____ _____ 2018 SCRAP EA _____ _____ 2019 NSN 2840 01 366 0532 4 EA _____ _____ P/N 6071T55G05 DIFFUSER MIDFRAME, CASE (3),GAS TURBINE 2020 UNUSUAL DAMAGE EVAL EA _____ _____ 2021 SCRAP EA _____ _____ 2020 NSN 2840 01 304 4302 20 EA _____ _____ P/N 6064T54G08 COMBUSTION CHAMBER 2023 UNUSUAL DAMAGE EVAL EA _____ _____ 2024 SCRAP EA _____ _____ 2025 NSN 4320 01 295 1989 3 EA _____ _____ P/N 5034T11P05 LUBE PUMP 2026 UNUSUAL DAMAGE EVAL EA _____ _____ 2027 SCRAP EA _____ _____ 2028 NSN 2840 01 102 6090 Modify to NSN 2840 01 473 3556 3 EA _____ _____ P/N 6043T35G01 Modify to P/N 5125T92G01 POWER TURBINE SHAFT 2029 UNUSUAL DAMAGE EVAL EA _____ _____ 2030 SCRAP EA _____ _____ 2031 NSN 2840 01 473 3556, 4 EA _____ _____ P/N 5125T92G01 POWER TURBINE SHAFT 2032 UNUSUAL DAMAGE EVAL EA _____ _____ 2033 SCRAP EA _____ _____ 2034 NSN 2840 01 143 9991 1 EA _____ _____ P/N 6053T29G01 SWIRL FRAME 2035 UNUSUAL DAMAGE EVAL EA _____ _____ 2036 SCRAP EA _____ _____ 2037 NSN 2840 01 301 8172 1 EA _____ _____ P/N 6039T56G05 SHAFT ASSY, A-SUMP 2038 UNUSUAL DAMAGE EVAL EA _____ _____ 2039 SCRAP EA _____ _____ 2040 NSN 2840 01 314 8595 5 EA _____ _____ P/N 5074T79G10 HMU, FUEL CONTROL 2041 UNUSUAL DAMAGE EVAL EA _____ _____ 2042 SCRAP EA _____ _____ 2043 NSN 2915 01 301 5661 or NSN 2915 01 332 2469 Modify to NSN 2915 01 492 3907 5 EA _____ _____ P/N 4046T52G21 or P/N 4046T52G27 Modify to P/N 4046T52G37 HMU, FUEL CONTROL 2044 UNUSUAL DAMAGE EVAL EA _____ _____ 2045 SCRAP EA _____ _____ 2046 NSN 2915 01 492 3907 10 EA _____ _____ P/N 4046T52G37 HMU FUEL CONTROL 2047 UNUSUAL DAMAGE EVAL EA _____ _____ 2048 SCRAP EA _____ _____ 2049 NSN 2915 01 304 4299 10 EA _____ _____ P/N 4045T30G07 INJECTOR ASSY 2050 UNUSUAL DAMAGE EVAL EA _____ _____ 2051 SCRAP EA _____ _____ 2052 NSN 2840 01 287 1316 5 EA _____ _____ P/N 6039T19G07 GEARBOX, ACCESSORY 2053 UNUSUAL DAMAGE EVAL EA _____ _____ 2054 SCRAP EA _____ _____ 2055 NSN 2995 01 313 0691 5 EA _____ _____ P/N 4046T28G15 VALVE ASSY, ANTI-ICE 2056 UNUSUAL DAMAGE EVAL EA _____ _____ 2057 SCRAP EA _____ _____ 2058 NSN 2995 01 294 9867 12 EA _____ _____ P/N 4046T28G14 VALVE ASSEMBLY,ANTI 2059 UNUSUAL DAMAGE EVAL EA _____ _____ 2060 SCRAP EA _____ _____ 2061 NSN 2995 01 309 1391 10 EA _____ _____ P/N 4046T28G16 VALVE ASSY, ANTI-ICE 2062 UNUSUAL DAMAGE EVAL EA _____ _____ 2063 SCRAP EA _____ _____ 2064 NSN 2915 01 120 8717 Modify to 2915 01 HS1 9178 15 EA _____ _____ P/N 3033T33G02 Modify to P/N 3033T33G03 FUEL BOOST PUMP 2065 UNUSUAL DAMAGE EVAL EA _____ _____ 2066 SCRAP EA _____ _____ 2067 NSN 2915 01 HS1 9178 35 EA _____ _____ P/N 3033T33G03 FUEL BOOST PUMP 2068 UNUSUAL DAMAGE EVAL EA _____ _____ 2069 SCRAP EA _____ _____ 2070 NSN 2995 01 305 6942 Modify to NSN 2995 01 460 1334 5 EA _____ _____ P/N 5066T38G04 Modify to, P/N 5066T38G07 or P/N 5066T38G08 VALVE ASSY, ANTI-ICE 2071 UNUSUAL DAMAGE EVAL EA _____ _____ 2072 SCRAP EA _____ _____ 2073 NSN 2995 01 460 1334 25 EA _____ _____ P/N 5066T38G07 or P/N 5066T38G08 VALVE ASSY, ANTI-ICE 2074 UNUSUAL DAMAGE EVAL EA _____ _____ 2075 SCRAP EA _____ _____ 2076 NSN 2840 01 312 4806 Modify to NSN 2840 01 HS1 4501 3 EA _____ _____ P/N 6071T19G02 Modify to P/N 6071T19G01 ACFT SEALS, CDP SEALS 2077 UNUSUAL DAMAGE EVAL EA _____ _____ 2078 SCRAP EA _____ _____ 2079 NSN 2840 01 HS1 4501 5 EA _____ _____ P/N 6071T19G01 ACFT SEALS, CDP SEALS 2080 UNUSUAL DAMAGE EVAL EA _____ _____ 2081 SCRAP EA _____ _____ 2082 NSN 2915 01 462 3670 1 EA _____ _____ P/N 3046T17G02 OVERSPEED DRAIN VALVE 2083 UNUSUAL DAMAGE EVAL EA _____ _____ 2084 SCRAP EA _____ _____ 2085 NSN 2840 01 370 3011 or NSN 2840 01 445 5423 or NSN 2840 01 445 5422 5 EA _____ _____ Modify to NSN 2840 01 476 1840 P/N 6082T04G06 or P/N 6082T04G13 or P/N 6082T04G14 Modify to P/N 6082T04G16 MATCHED ASSY/GG ROTOR 2086 UNUSUAL DAMAGE EVAL EA _____ _____ 2087 SCRAP EA _____ _____ 2088 NSN 2840 01 476 1840 18 EA _____ _____ P/N 6082T04G16 MATCHED ASSY/GG ROTOR 2089 UNUSUAL DAMAGE EVAL EA _____ _____ 2090 SCRAP EA _____ _____ 2091 NSN 2840 01 304 0917 Modify to NSN 2840 01 362 4935 2 EA _____ _____ P/N 6058T13G10 Modify to P/N 6058T13G11 or P/N 4922T80G01 STG. 3 NOZZLE DUCT & AIR SEAL 2092 UNUSUAL DAMAGE EVAL EA _____ _____ 2093 SCRAP EA _____ _____ 2094 NSN 2840 01 362 4935 2 EA _____ _____ P/N 6058T13G11 or P/N 4922T80G01 either P/N accepted STG. 3 NOZZLE DUCT and AIR SEAL 2095 UNUSUAL DAMAGE EVAL EA _____ _____ 2096 SCRAP EA _____ _____ 2097 NSN 2915 01 HS1 3688 3 EA _____ _____ P/N 6044T78G04 OVERSPEED DRAIN VALVE 2098 UNUSUAL DAMAGE EVAL EA _____ _____ 2099 SCRAP EA _____ _____ 2100 HOURLY RATE EA _____ _____ CONTRACT LINE ITEMS - OPTION PERIOD THREE ONE YEAR PERIOD FOLLOWING OPTION PERIOD TWO CLIN NIIN/ PART NUMBER/NOMEN EST QTY UNIT EST UNIT PRICE EST EXT PRICE 3001 NSN 2840 01 318 5538 4 EA _____ _____ P/N 6064T25G01 T700 ENGINE 3002 UNUSUAL DAMAGE EVAL EA _____ _____ 3003 SCRAP EA _____ _____ 3004 NSN 2840 01 317 6673 19 EA _____ _____ P/N 6064T26G01 COLD SECTION MODULE 3005 UNUSUAL DAMAGE EVAL EA _____ _____ 3006 SCRAP EA _____ _____ 3007 NSN 2840 01 366 0337 or NSN 2840 01 353 8343 30 EA _____ _____ P/N 6900T93G02 or P/N 6900T93G01 COMP,AXIAL 3008 UNUSUAL DAMAGE EVAL EA _____ _____ 3009 SCRAP EA _____ _____ 3010 NSN 2840 01 316 9791 18 EA _____ _____ P/N 6064T27G01 POWER TURBINE MODULE 3011 UNUSUAL DAMAGE EVAL EA _____ _____ 3012 SCRAP EA _____ _____ 3013 NSN 2840 01 305 6951 6 EA _____ _____ P/N 6071T04G02 STAGE 1, TURBINE NOZZLE 3014 UNUSUAL DAMAGE EVAL EA _____ _____ 3015 SCRAP EA _____ _____ 3016 NSN 2840 01 439 1684, 3 EA _____ _____ P/N 6058T13G12 STAGE 3, NOZZLE,DUCT and AIRSEAL 3017 UNUSUAL DAMAGE EVAL EA _____ _____ 3018 SCRAP EA _____ _____ 3019 NSN 2840 01 366 0532 4 EA _____ _____ P/N 6071T55G05 DIFFUSER MIDFRAME, CASE (3),GAS TURBINE 3020 UNUSUAL DAMAGE EVAL EA _____ _____ 3021 SCRAP EA _____ _____ 3020 NSN 2840 01 304 4302 20 EA _____ _____ P/N 6064T54G08 COMBUSTION CHAMBER 3023 UNUSUAL DAMAGE EVAL EA _____ _____ 3024 SCRAP EA _____ _____ 3025 NSN 4320 01 295 1989 3 EA _____ _____ P/N 5034T11P05 LUBE PUMP 3026 UNUSUAL DAMAGE EVAL EA _____ _____ 3027 SCRAP EA _____ _____ 3028 NSN 2840 01 102 6090 Modify to NSN 2840 01 473 3556 3 EA _____ _____ P/N 6043T35G01 Modify to P/N 5125T92G01 POWER TURBINE SHAFT 3029 UNUSUAL DAMAGE EVAL EA _____ _____ 3030 SCRAP EA _____ _____ 3031 NSN 2840 01 473 3556, 4 EA _____ _____ P/N 5125T92G01 POWER TURBINE SHAFT 3032 UNUSUAL DAMAGE EVAL EA _____ _____ 3033 SCRAP EA _____ _____ 3034 NSN 2840 01 143 9991 1 EA _____ _____ P/N 6053T29G01 SWIRL FRAME 3035 UNUSUAL DAMAGE EVAL EA _____ _____ 3036 SCRAP EA _____ _____ 3037 NSN 2840 01 301 8172 1 EA _____ _____ P/N 6039T56G05 SHAFT ASSY, A-SUMP 3038 UNUSUAL DAMAGE EVAL EA _____ _____ 3039 SCRAP EA _____ _____ 3040 NSN 2840 01 314 8595 5 EA _____ _____ P/N 5074T79G10 HMU, FUEL CONTROL 3041 UNUSUAL DAMAGE EVAL EA _____ _____ 3042 SCRAP EA _____ _____ 3043 NSN 2915 01 301 5661 or NSN 2915 01 332 2469 Modify to NSN 2915 01 492 3907 5 EA _____ _____ P/N 4046T52G21 or P/N 4046T52G27 Modify to P/N 4046T52G37 HMU, FUEL CONTROL 3044 UNUSUAL DAMAGE EVAL EA _____ _____ 3045 SCRAP EA _____ _____ 3046 NSN 2915 01 492 3907 10 EA _____ _____ P/N 4046T52G37 HMU FUEL CONTROL 3047 UNUSUAL DAMAGE EVAL EA _____ _____ 3048 SCRAP EA _____ _____ 3049 NSN 2915 01 304 4299 10 EA _____ _____ P/N 4045T30G07 INJECTOR ASSY 3050 UNUSUAL DAMAGE EVAL EA _____ _____ 3051 SCRAP EA _____ _____ 3052 NSN 2840 01 287 1316 5 EA _____ _____ P/N 6039T19G07 GEARBOX, ACCESSORY 3053 UNUSUAL DAMAGE EVAL EA _____ _____ 3054 SCRAP EA _____ _____ 3055 NSN 2995 01 313 0691 5 EA _____ _____ P/N 4046T28G15 VALVE ASSY, ANTI-ICE 3056 UNUSUAL DAMAGE EVAL EA _____ _____ 3057 SCRAP EA _____ _____ 3058 NSN 2995 01 294 9867 12 EA _____ _____ P/N 4046T28G14 VALVE ASSEMBLY,ANTI 3059 UNUSUAL DAMAGE EVAL EA _____ _____ 3060 SCRAP EA _____ _____ 3061 NSN 2995 01 309 1391 10 EA _____ _____ P/N 4046T28G16 VALVE ASSY, ANTI-ICE 3062 UNUSUAL DAMAGE EVAL EA _____ _____ 3063 SCRAP EA _____ _____ 3064 NSN 2915 01 120 8717 Modify to 2915 01 HS1 9178 15 EA _____ _____ P/N 3033T33G02 Modify to P/N 3033T33G03 FUEL BOOST PUMP 3065 UNUSUAL DAMAGE EVAL EA _____ _____ 3066 SCRAP EA _____ _____ 3067 NSN 2915 01 HS1 9178 35 EA _____ _____ P/N 3033T33G03 FUEL BOOST PUMP 3068 UNUSUAL DAMAGE EVAL EA _____ _____ 3069 SCRAP EA _____ _____ 3070 NSN 2995 01 305 6942 Modify to NSN 2995 01 460 1334 5 EA _____ _____ P/N 5066T38G04 Modify to, P/N 5066T38G07 or P/N 5066T38G08 VALVE ASSY, ANTI-ICE 3071 UNUSUAL DAMAGE EVAL EA _____ _____ 3072 SCRAP EA _____ _____ 3073 NSN 2995 01 460 1334 25 EA _____ _____ P/N 5066T38G07 or P/N 5066T38G08 VALVE ASSY, ANTI-ICE 3074 UNUSUAL DAMAGE EVAL EA _____ _____ 3075 SCRAP EA _____ _____ 3076 NSN 2840 01 312 4806 Modify to NSN 2840 01 HS1 4501 3 EA _____ _____ P/N 6071T19G02 Modify to P/N 6071T19G01 ACFT SEALS, CDP SEALS 3077 UNUSUAL DAMAGE EVAL EA _____ _____ 3078 SCRAP EA _____ _____ 3079 NSN 2840 01 HS1 4501 5 EA _____ _____ P/N 6071T19G01 ACFT SEALS, CDP SEALS 3080 UNUSUAL DAMAGE EVAL EA _____ _____ 3081 SCRAP EA _____ _____ 3082 NSN 2915 01 462 3670 1 EA _____ _____ P/N 3046T17G02 OVERSPEED DRAIN VALVE 3083 UNUSUAL DAMAGE EVAL EA _____ _____ 3084 SCRAP EA _____ _____ 3085 NSN 2840 01 370 3011 or NSN 2840 01 445 5423 or NSN 2840 01 445 5422 5 EA _____ _____ Modify to NSN 2840 01 476 1840 P/N 6082T04G06 or P/N 6082T04G13 or P/N 6082T04G14 Modify to P/N 6082T04G16 MATCHED ASSY/GG ROTOR 3086 UNUSUAL DAMAGE EVAL EA _____ _____ 3087 SCRAP EA _____ _____ 3088 NSN 2840 01 476 1840 20 EA _____ _____ P/N 6082T04G16 MATCHED ASSY/GG ROTOR 3089 UNUSUAL DAMAGE EVAL EA _____ _____ 3090 SCRAP EA _____ _____ 3091 NSN 2840 01 304 0917 Modify to NSN 2840 01 362 4935 2 EA _____ _____ P/N 6058T13G10 Modify to P/N 6058T13G11 or P/N 4922T80G01 STG. 3 NOZZLE DUCT & AIR SEAL 3092 UNUSUAL DAMAGE EVAL EA _____ _____ 3093 SCRAP EA _____ _____ 3094 NSN 2840 01 362 4935 2 EA _____ _____ P/N 6058T13G11 or P/N 4922T80G01 either P/N accepted STG. 3 NOZZLE DUCT and AIR SEAL 3095 UNUSUAL DAMAGE EVAL EA _____ _____ 3096 SCRAP EA _____ _____ 3097 NSN 2915 01 HS1 3688 3 EA _____ _____ P/N 6044T78G04 OVERSPEED DRAIN VALVE 3098 UNUSUAL DAMAGE EVAL EA _____ _____ 3099 SCRAP EA _____ _____ 3100 HOURLY RATE EA _____ _____ CONTRACT LINE ITEMS - OPTION PERIOD FOUR ONE YEAR PERIOD FOLLOWING OPTION PERIOD THREE CLIN NIIN/ PART NUMBER/NOMEN EST QTY UNIT EST UNIT PRICE EST EXT PRICE 4001 NSN 2840 01 318 5538 4 EA _____ _____ P/N 6064T25G01 T700 ENGINE 4002 UNUSUAL DAMAGE EVAL EA _____ _____ 4003 SCRAP EA _____ _____ 4004 NSN 2840 01 317 6673 19 EA _____ _____ P/N 6064T26G01 COLD SECTION MODULE 4005 UNUSUAL DAMAGE EVAL EA _____ _____ 4006 SCRAP EA _____ _____ 4007 NSN 2840 01 366 0337 or NSN 2840 01 353 8343 20 EA _____ _____ P/N 6900T93G02 or P/N 6900T93G01 COMP,AXIAL 4008 UNUSUAL DAMAGE EVAL EA _____ _____ 4009 SCRAP EA _____ _____ 4010 NSN 2840 01 316 9791 15 EA _____ _____ P/N 6064T27G01 POWER TURBINE MODULE 4011 UNUSUAL DAMAGE EVAL EA _____ _____ 4012 SCRAP EA _____ _____ 4013 NSN 2840 01 305 6951 6 EA _____ _____ P/N 6071T04G02 STAGE 1, TURBINE NOZZLE 4014 UNUSUAL DAMAGE EVAL EA _____ _____ 4015 SCRAP EA _____ _____ 4016 NSN 2840 01 439 1684, 3 EA _____ _____ P/N 6058T13G12 STAGE 3, NOZZLE,DUCT and AIRSEAL 4017 UNUSUAL DAMAGE EVAL EA _____ _____ 4018 SCRAP EA _____ _____ 4019 NSN 2840 01 366 0532 4 EA _____ _____ P/N 6071T55G05 DIFFUSER MIDFRAME, CASE (3),GAS TURBINE 4020 UNUSUAL DAMAGE EVAL EA _____ _____ 4021 SCRAP EA _____ _____ 4020 NSN 2840 01 304 4302 20 EA _____ _____ P/N 6064T54G08 COMBUSTION CHAMBER 4023 UNUSUAL DAMAGE EVAL EA _____ _____ 4024 SCRAP EA _____ _____ 4025 NSN 4320 01 295 1989 3 EA _____ _____ P/N 5034T11P05 LUBE PUMP 4026 UNUSUAL DAMAGE EVAL EA _____ _____ 4027 SCRAP EA _____ _____ 4028 NSN 2840 01 102 6090 Modify to NSN 2840 01 473 3556 3 EA _____ _____ P/N 6043T35G01 Modify to P/N 5125T92G01 POWER TURBINE SHAFT 4029 UNUSUAL DAMAGE EVAL EA _____ _____ 4030 SCRAP EA _____ _____ 4031 NSN 2840 01 473 3556, 4 EA _____ _____ P/N 5125T92G01 POWER TURBINE SHAFT 4032 UNUSUAL DAMAGE EVAL EA _____ _____ 4033 SCRAP EA _____ _____ 4034 NSN 2840 01 143 9991 1 EA _____ _____ P/N 6053T29G01 SWIRL FRAME 4035 UNUSUAL DAMAGE EVAL EA _____ _____ 4036 SCRAP EA _____ _____ 4037 NSN 2840 01 301 8172 1 EA _____ _____ P/N 6039T56G05 SHAFT ASSY, A-SUMP 4038 UNUSUAL DAMAGE EVAL EA _____ _____ 4039 SCRAP EA _____ _____ 4040 NSN 2840 01 314 8595 5 EA _____ _____ P/N 5074T79G10 HMU, FUEL CONTROL 4041 UNUSUAL DAMAGE EVAL EA _____ _____ 4042 SCRAP EA _____ _____ 4043 NSN 2915 01 301 5661 or NSN 2915 01 332 2469 Modify to NSN 2915 01 492 3907 5 EA _____ _____ P/N 4046T52G21 or P/N 4046T52G27 Modify to P/N 4046T52G37 HMU, FUEL CONTROL 4044 UNUSUAL DAMAGE EVAL EA _____ _____ 4045 SCRAP EA _____ _____ 4046 NSN 2915 01 492 3907 10 EA _____ _____ P/N 4046T52G37 HMU FUEL CONTROL 4047 UNUSUAL DAMAGE EVAL EA _____ _____ 4048 SCRAP EA _____ _____ 4049 NSN 2915 01 304 4299 10 EA _____ _____ P/N 4045T30G07 INJECTOR ASSY 4050 UNUSUAL DAMAGE EVAL EA _____ _____ 4051 SCRAP EA _____ _____ 4052 NSN 2840 01 287 1316 5 EA _____ _____ P/N 6039T19G07 GEARBOX, ACCESSORY 4053 UNUSUAL DAMAGE EVAL EA _____ _____ 4054 SCRAP EA _____ _____ 4055 NSN 2995 01 313 0691 5 EA _____ _____ P/N 4046T28G15 VALVE ASSY, ANTI-ICE 4056 UNUSUAL DAMAGE EVAL EA _____ _____ 4057 SCRAP EA _____ _____ 4058 NSN 2995 01 294 9867 12 EA _____ _____ P/N 4046T28G14 VALVE ASSEMBLY,ANTI 4059 UNUSUAL DAMAGE EVAL EA _____ _____ 4060 SCRAP EA _____ _____ 4061 NSN 2995 01 309 1391 10 EA _____ _____ P/N 4046T28G16 VALVE ASSY, ANTI-ICE 4062 UNUSUAL DAMAGE EVAL EA _____ _____ 4063 SCRAP EA _____ _____ 4064 NSN 2915 01 120 8717 Modify to 2915 01 HS1 9178 15 EA _____ _____ P/N 3033T33G02 Modify to P/N 3033T33G03 FUEL BOOST PUMP 4065 UNUSUAL DAMAGE EVAL EA _____ _____ 4066 SCRAP EA _____ _____ 4067 NSN 2915 01 HS1 9178 35 EA _____ _____ P/N 3033T33G03 FUEL BOOST PUMP 4068 UNUSUAL DAMAGE EVAL EA _____ _____ 4069 SCRAP EA _____ _____ 4070 NSN 2995 01 305 6942 Modify to NSN 2995 01 460 1334 5 EA _____ _____ P/N 5066T38G04 Modify to, P/N 5066T38G07 or P/N 5066T38G08 VALVE ASSY, ANTI-ICE 4071 UNUSUAL DAMAGE EVAL EA _____ _____ 4072 SCRAP EA _____ _____ 4073 NSN 2995 01 460 1334 25 EA _____ _____ P/N 5066T38G07 or P/N 5066T38G08 VALVE ASSY, ANTI-ICE 4074 UNUSUAL DAMAGE EVAL EA _____ _____ 4075 SCRAP EA _____ _____ 4076 NSN 2840 01 312 4806 Modify to NSN 2840 01 HS1 4501 3 EA _____ _____ P/N 6071T19G02 Modify to P/N 6071T19G01 ACFT SEALS, CDP SEALS 4077 UNUSUAL DAMAGE EVAL EA _____ _____ 4078 SCRAP EA _____ _____ 4079 NSN 2840 01 HS1 4501 5 EA _____ _____ P/N 6071T19G01 ACFT SEALS, CDP SEALS 4080 UNUSUAL DAMAGE EVAL EA _____ _____ 4081 SCRAP EA _____ _____ 4082 NSN 2915 01 462 3670 1 EA _____ _____ P/N 3046T17G02 OVERSPEED DRAIN VALVE 4083 UNUSUAL DAMAGE EVAL EA _____ _____ 4084 SCRAP EA _____ _____ 4085 NSN 2840 01 370 3011 or NSN 2840 01 445 5423 or NSN 2840 01 445 5422 5 EA _____ _____ Modify to NSN 2840 01 476 1840 P/N 6082T04G06 or P/N 6082T04G13 or P/N 6082T04G14 Modify to P/N 6082T04G16 MATCHED ASSY/GG ROTOR 4086 UNUSUAL DAMAGE EVAL EA _____ _____ 4087 SCRAP EA _____ _____ 4088 NSN 2840 01 476 1840 20 EA _____ _____ P/N 6082T04G16 MATCHED ASSY/GG ROTOR 4089 UNUSUAL DAMAGE EVAL EA _____ _____ 4090 SCRAP EA _____ _____ 4091 NSN 2840 01 304 0917 Modify to NSN 2840 01 362 4935 2 EA _____ _____ P/N 6058T13G10 Modify to P/N 6058T13G11 or P/N 4922T80G01 STG. 3 NOZZLE DUCT & AIR SEAL 4092 UNUSUAL DAMAGE EVAL EA _____ _____ 4093 SCRAP EA _____ _____ 4094 NSN 2840 01 362 4935 2 EA _____ _____ P/N 6058T13G11 or P/N 4922T80G01 either P/N accepted STG. 3 NOZZLE DUCT and AIR SEAL 4095 UNUSUAL DAMAGE EVAL EA _____ _____ 4096 SCRAP EA _____ _____ 4097 NSN 2915 01 HS1 3688 3 EA _____ _____ P/N 6044T78G04 OVERSPEED DRAIN VALVE 4098 UNUSUAL DAMAGE EVAL EA _____ _____ 4099 SCRAP EA _____ _____ 4100 HOURLY RATE EA _____ _____ Option Periods - Option periods, if exercised, will be in increments of twelve (12) months each, but will not exceed a total of forty-eight (48) months. Statement of Work (SOW) See Attachment A  52.212-1 Instructions to Offerors Commercial Items (JUN 2008) ADDENDUM 52.252-1 Solicitation Provisions Incorporated by Reference (Feb 1998) This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this Internet address http://acquisition.gov/far/index.html (End of provision) 52.211-14 Notice of Priority Rating for National Defense, Emergency Preparedness, and Energy Program Use (Apr 2008) Any contract awarded as a result of this solicitation will be __ DX rated order; X DO rated order certified for national defense, emergency preparedness, and energy program use under the Defense Priorities and Allocations System (DPAS) (15 CFR 700), and the Contractor will be required to follow all of the requirements of this regulation. 52.215-20 Requirements for Cost or Pricing Data or Information Other Than Cost or Pricing Data (Oct 1997) Alternate IV (Oct 1997) As prescribed in 15.408(I), replace the text of the basic provision with the following: (a) Submission of Cost or pricing data is not required (b) Submit Other Than Cost or Pricing Data as if you were submitting Cost and Pricing Data. The requirement for certified cost and pricing data is waived. Submission of other than cost and pricing data must be in the format used in FAR 15.403-5(b)(2). 52.217-5 Evaluation of Options (July 1990) To receive an award, the company must be registered in the Central Contractor Registration Database (CCR). A Small Business Subcontracting Plan FAR 52.219-9 is required with the offer. (End of FAR 52.212-1 ADDENDUM) 52.212-2 Evaluation -Commercial Items (Jan 1999) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer, conforming to the solicitation, will be most advantageous to the Government. Offers that are significantly higher or lower than the government's estimate may be considered an indication that the offeror does not understand the requirement and may be evaluated as posing a significant performance risk. The following factors shall be used to evaluate offerors are listed in order of importance. Evaluation Factors: Technical capability, Past Performance, Delivery and Price. Technical and past performance, when combined, is significantly more important than cost or price. This is a best value, commercial item acquisition; award may be made for other than lowest price. The Government intends to award to a responsible offeror whose offer conforms to the solicitation, and provides the Government with the best value, price and other factors considered. Technical Capabilities Offerors are to provide a statement of technical qualifications, including a summary of the technical expertise, facilities and documentation for overhauling the components listed in the schedule. Past Performance Offerors shall provide information on two (2) contracts performed by their organization over the past three years for the GE T700 engine. The contractor shall submit the Past Performance Questionnaire (Attachment B) to two (2) references for completion and return to the address shown on the Questionnaire no later than the closing date of this solicitation. See attachment B for Questionnaire and instructions. Delivery Offerors shall provide delivery dates based on receipt of unit from the Government. Price Offerors shall provide unit, unusual damage evaluation and scrap pricing. The Government will evaluate quotes for award purposes by adding the total price for all items. 52.212-3 Offeror Representations and Certifications - Commercial Items (Aug 2009) Alternate I (Apr 2002) An offeror shall complete only paragraph (b) of this provision if the offeror has completed the annual representations and certifications electronically at http://orca.bpn.gov. If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (m) of this provision. 52.212-4 CONTRACT TERMS AND CONDITIONS - COMMERCIAL ITEMS (MAR 2009) ADDENDUM 52.252-2 Clauses Incorporated By Reference (Feb 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this Internet address http://acquisition.gov/far/index.html 52.216-18 Ordering (Oct 1995) (a) Any supplies and services to be furnished under this contract shall be ordered by issuance of delivery orders or task orders by the individuals or activities designated in the Schedule. Such orders may be issued from Date of Award or Date of Exercise of an Option through One Year from Date of Award or One Year from the Date of Exercise of an Option Period. (b) All delivery orders or task orders are subject to the terms and conditions of this contract. In the event of conflict between a delivery order or task order and this contract, the contract shall control. (c) If mailed, a delivery order or task order is considered "issued" when the Government deposits the order in the mail. Orders may be issued orally, by facsimile, or by electronic commerce methods only if authorized in the Schedule. (End of clause) 52.216-19 Order Limitations (Oct 1995) (a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than one (1) each of any line item [insert dollar figure or quantity], the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract. (b) Maximum order. The Contractor is not obligated to honor- (1) Any order for a single item in excess of Any Line Item's Total Value [insert dollar figure or quantity]; (2) Any order for a combination of items in excess of The applicable Base or Option Year Total Dollar Value [insert dollar figure or quantity]; or (3) A series of orders from the same ordering office within 10 days that together call for quantities exceeding the limitation in paragraph (b)(1) or (2) of this section. (c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) of this section. (d) Notwithstanding paragraphs (b) and (c) of this section, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 15 days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons. Upon receiving this notice, the Government may acquire the supplies or services from another source. (End of clause) 52.216-21 Requirements (Oct 1995) (a) This is a requirements contract for the supplies or services specified, and effective for the period stated, in the Schedule. The quantities of supplies or services specified in the Schedule are estimates only and are not purchased by this contract. Except as this contract may otherwise provide, if the Government's requirements do not result in orders in the quantities described as "estimated" or "maximum" in the Schedule, that fact shall not constitute the basis for an equitable price adjustment. (b) Delivery or performance shall be made only as authorized by orders issued in accordance with the Ordering clause. Subject to any limitations in the Order Limitations clause or elsewhere in this contract, the Contractor shall furnish to the Government all supplies or services specified in the Schedule and called for by orders issued in accordance with the Ordering clause. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations. (c) Except as this contract otherwise provides, the Government shall order from the Contractor all the supplies or services specified in the Schedule that are required to be purchased by the Government activity or activities specified in the Schedule. (d) The Government is not required to purchase from the Contractor requirements in excess of any limit on total orders under this contract. (e) If the Government urgently requires delivery of any quantity of an item before the earliest date that delivery may be specified under this contract, and if the Contractor will not accept an order providing for the accelerated delivery, the Government may acquire the urgently required goods or services from another source. (f) Any order issued during the effective period of this contract and not completed within that period shall be completed by the Contractor within the time specified in the order. The contract shall govern the Contractor's and Government's rights and obligations with respect to that order to the same extent as if the order were completed during the contract's effective period; provided, that the Contractor shall not be required to make any deliveries under this contract after determined at time of award based on six (6) months after expiration date of ordering period [insert date]. (End of clause) 52.217-5 Evaluation of Options (Jul 1990) 52.217-9 Option to Extend the Term of the Contract (Mar 2000) (a) The Government may extend the term of this contract by written notice to the Contractor within 30 calendar days prior to expiration [insert the period of time within which the Contracting Officer may exercise the option]; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 45 calendar days [60 days unless a different number of days is inserted] before the contract expires. The preliminary notice does not commit the Government to an extension. (b) If the Government exercises this option, the extended contract shall be considered to include this option clause. (c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed Five (years). (End of clause) 52.232-19 Availability of Funds for the Next Fiscal Year (Apr 1984) Funds are not presently available for performance under this contract beyond 30 September 2010. The Government's obligation for performance of this contract beyond that date is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise for performance under this contract beyond 30 September 2010, until funds are made available to the Contracting Officer for performance and until the Contractor receives notice of availability, to be confirmed in writing by the Contracting Officer.(End of clause) 52.246-15 Certificate of Conformance (Apr 1984) 52.247-45 F.O.B. Origin and/or F.O.B. Destination Evaluation (Apr 1984) 52.212-5 Contract Terms and Conditions to Implement Statutes or Executive Orders - Commercial Items (Feb 2010) a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (1) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). (2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553). (3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004)(Pub. L. 108-77,108-78) (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [Contracting Officer check as appropriate.] _X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 253g and 10 U.S.C. 2402). _X_ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Dec 2008) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). __ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (MAR 2009) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) __ (4) 52.204-11, American Recovery and Reinvestment Act-Reporting Requirements (Mar 2009) (Pub. L. 111-5). __ (5) 52.219-3, Notice of Total HUBZone Set-Aside (Jan 1999) (15 U.S.C. 657a). __ (6) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (JULY 2005) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). __ (7) [Reserved] __ (8)(i) 52.219-6, Notice of Total Small Business Set-Aside (June 2003) (15 U.S.C. 644). __ (ii) Alternate I (Oct 1995) of 52.219-6. __ (iii) Alternate II (Mar 2004) of 52.219-6. __ (9)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644). __ (ii) Alternate I (Oct 1995) of 52.219-7. __ (iii) Alternate II (Mar 2004) of 52.219-7. _X_ (10) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)). _X_ (11)(i) 52.219-9, Small Business Subcontracting Plan (Apr 2008) (15 U.S.C. 637(d)(4)). __ (ii) Alternate I (Oct 2001) of 52.219-9. __ (iii) Alternate II (Oct 2001) of 52.219-9. _ (12) 52.219-14, Limitations on Subcontracting (Dec 1996) (15 U.S.C. 637(a)(14)). _X_ (13) 52.219-16, Liquidated Damages-Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)). __ (14)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (OCT 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer). __ (ii) Alternate I (June 2003) of 52.219-23. __ (15) 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting (Apr 2008) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). __ (16) 52.219-26, Small Disadvantaged Business Participation Program- Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323). __ (17) 52.219-27, Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (May 2004) (15 U.S.C. 657 f). _X_ (18) 52.219-28, Post Award Small Business Program Rerepresentation (Apr 2009) (15 U.S.C. 632(a)(2)). _X_ (19) 52.222-3, Convict Labor (June 2003) (E.O. 11755). _X_ (20) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Aug 2009) (E.O. 13126). _X_ (21) 52.222-21, Prohibition of Segregated Facilities (Feb 1999). _X_ (22) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). _X_ (23) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sept 2006) (38 U.S.C. 4212). _X_ (24) 52.222-36, Affirmative Action for Workers with Disabilities (Jun 1998) (29 U.S.C. 793). _X_ (25) 52.222-37, Employment Reports on Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sept 2006) (38 U.S.C. 4212). _ _ (26) Reserved __ (27) 52.222-54, Employment Eligibility Verification (JAN 2009). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.) __ (28)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.) __ (29) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b). __ (30)(i) 52.223-16, IEEE 1680 Standard for the Environmental Assessment of Personal Computer Products (DEC 2007) (E.O. 13423). __ (ii) Alternate I (DEC 2007) of 52.223-16. _ _ (31) 52.225-1, Buy American Act-Supplies (Feb 2009) (41 U.S.C. 10a-10d). __ (32)(i) 52.225-3, Buy American Act-Free Trade Agreements-Israeli Trade Act (June 2009) (41 U.S.C. 10a-10d, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, Pub. L. 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, and 110-138). __ (ii) Alternate I (Jan 2004) of 52.225-3. __ (iii) Alternate II (Jan 2004) of 52.225-3. _X_ (33) 52.225-5, Trade Agreements (AUG 2009) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note). _X_ (34) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). __ (35) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150). __ (36) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150). __ (37) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). __ (38) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 255(f), 10 U.S.C. 2307(f)). _X_ (39) 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (Oct 2003) (31 U.S.C. 3332). __ (40) 52.232-34, Payment by Electronic Funds Transfer-Other than Central Contractor Registration (May 1999) (31 U.S.C. 3332). __ (41) 52.232-36, Payment by Third Party (May 1999) (31 U.S.C. 3332). __ (42) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a). __ (43)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). __ (ii) Alternate I (Apr 2003) of 52.247-64. (c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: [Contracting Officer check as appropriate.] __ (1) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). __ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 1989) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (3) 52.222-43, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Multiple Year and Option Contracts) (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (4) 52.222-44, Fair Labor Standards Act and Service Contract Act-Price Adjustment (Sep 2009) (29 U.S.C. 206 and 41 U.S.C. 351, et seq.). __ (5) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 351, et seq.). __ (6) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.). __ (7) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). __ (8) 52.237-11, Accepting and Dispensing of $1 Coin (Sept 2008) (31 U.S.C. 5112(p)(1)). (d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records-Negotiation. (1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract. (2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved. (3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law. (e)(1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1) in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause- (i) 52.203-13, Contractor Code of Business Ethics and Conduct (Dec 2008) (Pub. L. 110-252, Title VI, Chapter 1 (41 U.S.C. 251 note)). (ii) 52.219-8, Utilization of Small Business Concerns (May 2004) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $550,000 ($1,000,000 for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities. (iii) [Reserved] (iv) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246). (v) 52.222-35, Equal Opportunity for Special Disabled Veterans, Veterans of the Vietnam Era, and Other Eligible Veterans (Sept 2006) (38 U.S.C. 4212). (vi) 52.222-36, Affirmative Action for Workers with Disabilities (June 1998) (29 U.S.C. 793). (vii) 52.222-39, Notification of Employee Rights Concerning Payment of Union Dues or Fees (Dec 2004) (E.O. 13201). (viii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.). (ix) 52.222-50, Combating Trafficking in Persons (Feb 2009) (22 U.S.C. 7104(g)). ___Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)). (x) 52.222-51, Exemption from Application of the Service Contract Act to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (Nov 2007) (41 U.S.C. 351, et seq.). (xi) 52.222-53, Exemption from Application of the Service Contract Act to Contracts for Certain Services-Requirements (Feb 2009) (41 U.S.C. 351, et seq.). (xii) 52.222-54, Employment Eligibility Verification (JAN 2009). (xiii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Mar 2009) (Pub. L. 110-247). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6. (xiv) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64. (2) While not required, the contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations. (End of clause)
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/DHS/USCG/USCGARSC/HSCG38-10-R-J00006/listing.html)
 

Place of Performance

Address: Aviation Logistics Center, Elizabeth City, North Carolina, 27909, United States

Zip Code: 27909
 

Record

SN02085917-W 20100310/100308234738-8ab3198fadf111600f006fe416aa369b (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |