Loren Data's SAM Daily™

FBO DAILY ISSUE OF MARCH 13, 2010 FBO #3031
MODIFICATION

71 -- Equipment Racks

Notice Date

3/11/2010
 

Notice Type

Modification/Amendment
 

NAICS

332322 — Sheet Metal Work Manufacturing
 

Contracting Office

Department of the Air Force, Air Force Materiel Command, AFFTC - AF Flight Test Center, 5 S WOLFE AVE, Edwards AFB, California, 93524-1185, United States
 

ZIP Code

93524-1185
 

Solicitation Number

F1S0AE9316B004
 

Archive Date

6/9/2010
 

Point of Contact

Nathan C. Hansing, Phone: 6612752538
 

E-Mail Address

nathan.hansing@edwards.af.mil
(nathan.hansing@edwards.af.mil)
 

Small Business Set-Aside

Total Small Business
 

Description

Combined Synopsis/Solicitation The Solicitation number is F1S0AE9316B004. This is a combined synopsis/solicitation for commercial items prepared IAW the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. This is a request for quotation (RFQ). The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2005-38 and DFARs Change Notice (DCN) 2010-03-01. NAICS is 332322 and the size standard is 500 employees; This acquisition is a 100% small business set aside. The AFFTC/PKE, Edwards Air Force Base, CA is seeking to purchase the following equipment racks; Minimum Salient Characteristics for Equipement Racks for Mission Control Room Build MCR 3 The racks shall be a 100% match with existing Equipto Racks (per minimum salient characteristics sows below). Due to space considerations, the only way for the Government to be certain proposed equipment is a 100% match, the contractor shall physically demonstrate the racks are a 100% physical match by coming to EAFB and providing a live demonstration of their proposed substitute. The racks must be bolted and secured to existing equipment racks. The contractor shall perform this demonstration before close of the FedBizOpps solicitation. The Government will not pay for the demonstration and will not incur any additional costs as a result of the visit and demonstration. 30'' RACKS-for Quote # 6077- QTY OF 7 RACKS TOTAL 1. EQUIPTO P/N: 40H-8772-03 (INCLUDES 4 TAPPED VMR'S p/n 01-8702-02) FRAME 19 X 87.5 X 30.75 (WIDTH NOT TO EXCEED 21.5 ") TOTAL QTY REQUIRED 7 2. EQUIPTO P/N: 01-8702-02 RAIL VERTICAL MOUNTING 87.50 TAPPED REC'D 24.5" FROM REAR. TAL QTY REQUIRED 14 3. EQUIPTO P/N: 30-8748-11 PANEL SIDE 87.5 X 30.75-must be a flush fit with the frame so it does not add to the footprint of the cabinet TOTAL QTY REQUIRED 8 4. EQUIPTO P/N: 11-8711-46 DOOR FACE LH 19 X 87.50 MOUNTED REAR W/ 2 POINT LATCH ENGAGEMENT SYSTEM- must be a flush fit with the frame so it does not add to the footprint of the cabinet- TOTAL QTY REQUIRED 7 5. EQUIPTO P/N: 03-1206-32-6P POWER STRIP 12 OUTLET 6' CORD/PLUG 15 AMP REC'D 1.75" FROM REAR TOTAL QTY REQUIRED 14 6. EQUIPTO P/N: BB-0070-32-87 BUS BAR 70 REC'D 3.50" LEFT REAR TOTAL QTY REQUIRED 7 7. EQUIPTO P/N: 2T-00079-1 PANEL TOP 19 X 30.75 W/ (2) 4" FAN CUTOUTS TOTAL QTY REQUIRED 7 8. EQUIPTO P/N: 991-00079-1 FAN WHISPER XL 65 CFM W/ HARDWARE TOTAL QTY REQUIRED 14 9. EQUIPTO P/N: SFM-4 GUARD FINGER STEEL WIRE TOTAL QTY REQUIRED 28 10. EQUIPTO P/N: 11-8711-81-LK DOOR FACE 19 X 87.50 LH W/ LOCK & WINDOW MOUNTED FRONT - ANY BAY- W/ 2 POINT LATCH ENGAGEMENT SYSTEM-- must be a flush fit with the frame so it does not add to the footprint of the cabinet TOTAL QTY REQUIRED 1 11. EQUIPTO P/N: 156-005-051 TEXTURED BLACK PAINT 595 27038 12. RACK MUST HAVE A MINIMUM OF 750 LBS. LOAD FACTOR 30'' RACKS-for Quote # 6098- QTY OF 5 RACKS TOTAL 13. EQUIPTO P/N: 40H-8772-03 (INCLUDES 4 TAPPED VMR'S p/n 01-8702-02) FRAME 19 X 87.50 X 30.75 (WIDTH NOT TO EXCEED 21.5") TOTAL QTY REQUIRED 5 14. EQUIPTO P/N: 01-8702-02 RAIL VERTICAL MOUNTING 87.50 TAPPED REC'D 24.5" FROM REAR. TOTAL QTY REQUIRED 10 15. EQUIPTO P/N: 30-8748-11 PANEL SIDE 87.50 X 30.75 --must be a flush fit with the frame so it does not add to the footprint of the cabinet TOTAL QTY REQUIRED 10 16. EQUIPTO P/N: 11-8711-46 DOOR FACE LH 19 X 87.50 MOUNTED REAR W/ 2 POINT LATCH ENGAGEMENT SYSTEM- must be a flush fit with the frame so it does not add to the footprint of the cabinet- TOTAL QTY REQUIRED 5 17. EQUIPTO P/N: 03-1206-32-6P POWER STRIP 12 OUTLET 6' CORD/PLUG 15 AMP REC'D 1.75" FROM REAR TOTAL QTY REQUIRED 10 18. EQUIPTO P/N: BB-0070-32-87 BUS BAR 70 REC'D 3.5" LEFT REAR TOTAL QTY REQUIRED 5 19. EQUIPTO P/N: 2T-00079-1 PANEL TOP 19 X 30.75 W/ (2) 4" FAN CUTOUTS TOTAL QTY REQUIRED 5 20. EQUIPTO P/N:991-00079-1 FAN WHISPER XL 65 CFM W/ HARDWARE TOTAL QTY REQUIRED 10 21. EQUIPTO P/N: SFM-4 GUARD FINGER STEEL WIRE TOTAL QTY REQUIRED 20 22. EQUIPTO P/N: 11-8711-81 DOOR FACE 19 X 87.50 LH WINDOW MOUNTED FRONT - ANY BAY- W/ 2 POINT LATCH ENGAGEMENT SYSTEM-- must be a flush fit with the frame so it does not add to the footprint of the cabinet TOTAL QTY REQUIRED 2 23. EQUIPTO P/N: 80-0202-05 SCREW 10-32 X.5 MACH W/NYL WASHER'S-MUST BE BLACK TOTAL QTY REQUIRED 500 24. EQUIPTO P/N: 156-005-051 TEXTURED BLACK PAINT 595 27038 25. MUST HAVE A MINIMUM OF 750 LBS. LOAD FACTOR 36" HEAVY DUTY Racks for Quote # 6076- QTY OF 4 RACKS TOTAL 26. EQUIPTO P/N:170H-087-036 (INCLUDES 4 TAPPED VMR'S p/n 010-087-012) FRAME 19 X 87.50 X 36 (WIDTH NOT TO EXCEED 24 ") TOTAL QTY REQUIRED: 4 27. EQUIPTO P/N: 010-087-012 RAIL VERTICAL MOUNTING 87.50 TAPPED REC'D 23.5" FROM REAR. TOTAL QTY REQUIRED 8 28. EQUIPTO P/N: 335-987-010 PANEL SIDE 87.50 X 36 UNMNTD TOTAL QTY REQUIRED 2 29. EQUIPTO P/N: 091-187-010-WOL DOOR FACE 19 X 87.50 W/O LOCK- With 2 POINT LATCH ENGAGEMENT SYSTEM-- MOUNTED REAR- must be a flush fit with the frame so it does not add to the footprint of the cabinet TOTAL QTY REQUIRED 4 30. EQUIPTO P/N: 03-1206-32-6P POWER STRIP 12 OUTLET 6' CORD/PLUG 15 AMP REC'D 1.75' FROM REAR TOTAL QTY REQUIRED 8 31. EQUIPTO P/N: CBB-070-032-87 BUS BAR 87.50 Mntd Rec'd 3.50" LEFT REAR TOTAL QTY REQUIRED 4 32. EQUIPTO P/N: 371-00079-1 PANEL TOP 19 X 36 w/ (2) 4" FAN CUTOUTS TOTAL QTY REQUIRED 4 33. EQUIPTO P/N: 991-00079-1 FAN WHISPER XL 65 CFM w/ HARDWARE TOTAL QTY REQUIRED 8 34. EQUIPTO P/N: SFM-4 GUARD FINGER STEEL WIRE TOTAL QTY REQUIRED 16 35. EQUIPTO P/N: 80-0202-05 Screw 10-32 X.5 MACH W/NYLON WASHERS -MUST BE BLACK TOTAL QTY REQUIRED 1,000 36. EQUIPTO P/N: 282-006-004 STUD JOINING-MUST BE COMPATIBLE FIT WITH EXISTING EQUIPTO HEAVY DUTY RACKS THAT WILL SATISFY THE EDWARDS AFB AND THE CALIFORNIA EARTHQUAKE REQUIREMENT TOTAL QTY REQUIRED 30 37. EQUIPTO P/N: 156-005-051 TEXTURED BLACK PAINT 595 27038 MUST HAVE A MINIMUM OF 1850 LBS. LOAD FACTOR Interested parties who believe they can meet all the requirements for the items described in this synopsis are invited to submit in writing a complete quote including delivery FOB destination Edwards AFB CA 93524. Offerors are required to submit with their quote enough information for the Government to evaluate the minimum requirements detailed in this synopsis. CONTRACTORS MUST COMPLY WITH FAR 52.204-7 CENTRAL CONTRACTOR REGISTRATION AND DFARS 252.204-7004, ALTERNATE A. INTERESTED CONTRACTORS CAN ACCESS THE CLAUSES BY INTERNET URL: http://farsite.hill.af.mil. TO REGISTER WITH THE CCR, GO TO URL: http://www.ccr.gov/. ONLINE REPRESENTATIONS AND CERTIFICATIONS APPLICATION (ORCA) MUST BE COMPLETED. USE OF ONLINE REPRESENTATIONS AND CERTIFICATIONS APPLICATION (ORCA) BECAME MANDATORY 1 JANUARY 2005. CONTRACTORS CAN ACCESS ORCA THROUGH CCR BY INTERNET URL: http://www.ccr.gov/. The following provisions and clauses apply: Clause 52.211-6 Brand Name or Equal, Provision 52.212-1, Instructions to Offerors--Commercial; Clause 52.212-2 Evaluation-Commercial Items, the following factor shall be used to evaluate offers: Lowest price technically acceptable offer, Technically acceptable is meeting all minimum salient characteristics; clause 52.212-4, Contract Terms and Conditions--Commercial Items; clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes Or Executive Orders--Commercial Items (to include: 52.222-26, Equal Opportunity; 52.222-35, Affirmative Action for Special Disabled and Vietnam Era Veterans; 52.222-36, Affirmative Action for Handicapped Workers; 52.222-37, Employment Reports on Special Disabled Veterans and Veterans of the Vietnam Era); Clause 52.232-33 Mandatory information for electronic funds transfer payment. The following DFARs clauses apply to this acquisition: Clause 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisition of Commercial Items; 252.225-7001 Buy American Act and Balance of Payment Program: The following AFFARS clauses apply to this acquisition: Clause 5352.223-9000, Elimination of Use of Class I Ozone Depleting Materials, 252.211-7003, Item Identification and valuation; 252.232-7010. Levies on Contract Payments; 5352.201-910, Ombudsman; 5352.242-9000, Offers are due at the Air Force Flight Test Center, Directorate of Contracting, 5 South Wolfe Avenue, Building 2800, Edwards AFB, CA, 93524, not later than March 29, 2010 at 5 pm PST. E-mail address: Nathan.hansing@edwards.af.mil. Phone: 661-275-2538 Fax: 661-277-0470
 

Web Link

FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/AFFTC/F1S0AE9316B004/listing.html)
 

Place of Performance

Address: 5 S. Wolfe Ave, Edwards AFB, California, 93524, United States

Zip Code: 93524
 

Record

SN02090155-W 20100313/100311235451-48795dcb5eb15c8c82af3747ae4d97f5 (fbodaily.com)
 

Source

FedBizOpps Link to This Notice
(may not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |