SOURCES SOUGHT
66 -- Mini Two Pressure Humidity Generator
- Notice Date
- 3/30/2010
- Notice Type
- Sources Sought
- NAICS
- 334515
— Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals
- Contracting Office
- Department of the Air Force, Air Force Materiel Command, 562 CBSG OMP (AFMETCAL), 813 Irving Wick Dr. W. Bldg 2, Heath, Ohio, 43056-6116, United States
- ZIP Code
- 43056-6116
- Solicitation Number
- 11M-237A-TE
- Archive Date
- 3/30/2011
- Point of Contact
- Allen Kurella, Phone: 740-788-5052
- E-Mail Address
-
Allen.Kurella@afmetcal.af.mil
(Allen.Kurella@afmetcal.af.mil)
- Small Business Set-Aside
- N/A
- Description
- Mini Two Pressure Humidity Generator This is a request for information (RFI) / SOURCES SOUGHT SYNOPSIS. This request is not a solicitation (Request for Proposal or Request for Quotations) or a promise to issue a solicitation in the future. The purpose of this request for information is in support of market research being conducted by the Air Force Metrology Calibration Program (AFMETCAL) to identify potential sources and gather information on current capabilities within the market. This synopsis is for planning purposes only and is NOT to be construed as a commitment by the Government nor will the Government pay for information solicited hereunder. All costs associated with responding to this RFI will be solely at the responding party's expense. All information received in response to this RFI that is marked PROPRIETARY will be handled accordingly. Proprietary information will be safeguarded in accordance with the applicable Government regulations. Proprietary information or trade secrets should be clearly identified. AFMETCAL is considering a purchase of a Mini Two Pressure Humidity Generator. This concerns the two unit acquisition of a Mini Humidity Generator using the NIST proven Two Pressure/Two Temperature principle for the RASCALs 1 and 2. Automated features of this unit allow the generator to perform humidity and temperature profiles completely unattended, while continuously recording and printing system data. The Mini Humidity Generator shall produce a Relative Humidity from a range of 10 to 95% RH, +/-0.05 RH (depending on air supply pressure). The system shall also generate known temperatures from 10 to 60 deg C at an accuracy of +/-0.05 deg C. The unit shall incorporate a test chamber that is surrounded by a fluid jacket on five sides and shall be large enough to hold a number of probes and/or have access ports for tubing and other common connectors. It will contain its own air compressor. Also since this unit will be used in exposed areas; a ruggedized case will be required. The test chamber must be at least 6x6x6 inches, and the entire unit must take no more than 20 x 30 inches of floor space. The total estimated quantity is two (2) units. Surplus or used material is not acceptable for this item. Offerors responding to this sources sought market research notice must: (1) state whether they are a small or large business, and indicate if the company is a small disadvantaged or woman-owned business, veteran owned, 8(a) firm, or a historically black college or university or minority institution (HBCU/MI), or a historically underutilized business zone (HUBZone) small business (2) advise if your product is a commercial item and how long you can hold pricing if quotes are requested (3) advise if you have the item on a GSA schedule or other Government contract include front page of schedule and the page showing the part is on award (4) provide information concerning the technical capabilities of the product you are interested in offering, including commercial literature/brochures and warranty. Describe any awards you have been involved in that are the same as or similar to what is described in this RFI. Include any other pertinent information which would enable the government to assess your firm's capabilities (5) advise if you accept the Government purchase card (6) Provide Point of Contact include phone number and email address (7) provide assigned Commercial and Government Entity (CAGE) Code (8) Advise how much time you would need to submit a technical proposal if a solicitation is issued (9) provide an estimated price for one each, an estimated price for the total quantity and provide any price quantity discounts based on the total estimated quantity (10) include how many units you could deliver every 30 days. Submit all responses to the listed point of contact or to MLK@afmetcal.af.mil. If an email response is not possible, submit by FAX to 740-788-5157 or mail to 813 Irving-wick Dr W., Building 2, Heath OH 43056-1199. Reference 11M-237A-TE in all correspondence. Responses are due by 12 April 2010. Point of Contact - Allen Kurella, Contract Specialist, Phone 740-788-5052 Email: allen.kurella@afmetcal.af.mil.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/USAF/AFMC/AFMETCAL/11M-237A-TE/listing.html)
- Record
- SN02107633-W 20100401/100331000140-047f0b54134c89ac69ff17954e21a555 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |