MODIFICATION
10 -- Amendment 0001 - SPARE PARTS, SPECIAL TOOLS AND EQUIPMENT ASSOCIATED WITH THE 30MM MK44
- Notice Date
- 4/5/2010
- Notice Type
- Modification/Amendment
- NAICS
- 332995
— Other Ordnance and Accessories Manufacturing
- Contracting Office
- N00164 NAVAL SURFACE WARFARE CENTER, INDIANA 300 Highway 361, Building 64 Crane, IN
- ZIP Code
- 00000
- Solicitation Number
- N0016410RJN92
- Response Due
- 5/10/2010
- Archive Date
- 5/25/2010
- Point of Contact
- MR. MATTHEW SUMMERS 812-854-8756 MR. MATTHEW SUMMERS, 812-854-8756,email: matthew.s.summers@navy.mil
- E-Mail Address
-
POINT OF CONTACT
(matthew.s.summers@navy.mil)
- Small Business Set-Aside
- N/A
- Description
- This synopsis is being posted to the Federal Business Opportunities (FBO) website located at http://www.fbo.gov, the Navy Electronic Commerce on Line (NECO) website located at https://www.neco.navy.mil/, and the Naval Surface Warfare Center, Crane Division, Acquisition website located at http://www.crane.navy.mil/acquisition/homepage.htm. FBO is the primary point of entry to be used when access to synopses and solicitations from the World Wide Web is required. However, the NECO webpage as well as the Naval Surface Warfare Center, Crane Division, Acquisition webpage serve as alternatives if the FBO website is unavailable. AMENDMENT 0001 This amendment is being issued to modify the Paragraph in the synopsis that reads: The contract will be awarded for a quantity of 1 EA, P/N 435-1002-4, Gun Control Unit; 1 EA, P/N 465-0120, Cam Pin Assembly; 22 EA, P/N 465-0171, Keeper, Firing Pin Sleeve; 16 EA, P/N 465-0209, Button, Link Stripper; 1 EA, P/N 465-0218, Stepped Spacer; 1 EA, P/N 465-0291, Solenoid Subassembly; 1 EA, P/N 465-0296 Harness Assembly, Feed Select Solenoid; 2 EA, P/N 465-0434, Firing Pin Assembly; 4 EA, P/N 465-0743, Kit, Sear Washer Replacement; 12 EA, P/N 465-0932, Pin, Grooved, Headed; 3 EA, P/N 465-4015, Crank, Hand; 1 EA, P/N 465-4089, Sear Assembly; 8 EA, P/N 465-4147, Kit, Clutch Spring Assembly; 3 EA, P/N 465-5047, Solenoid, Sear; 3 EA, P/N 465-5103, Shield, Link; 1 EA, P/N 465-5323, Sleeve, Firing Pin; 2 EA, P/N 465-5381, Pawl, Firing Pin, 1 EA, P/N 465-5488, Cover Assembly, Lower Link Stripper; 1 EA, P/N 465-5489, Cover Assembly, Upper Link Stripper; 2 EA, P/N 465-5494-2, Motor, 1.0 HP, DC; 1 EA, P/N 465-5524-1, Round Positioner Assembly; 2 EA, P/N 465-5530-2, Recoil Mec! hanism; 10 EA, P/N 465-5931, Spring, Case Eject; 1 EA, P/N 435-1819-1, Error Code Reader Kit; 1 EA, P/N 435-1871, Hom Device; 1 EA, P/N 465-0723, Service Tool Screwdriver, Damper Valve; 1 EA, P/N 465-0724, Holder, Slippage Torque Test, Receiver Clutch; 1 EA, P/N 465-0725, Removal Tool, Damper Cap; 2 EA, P/N 465-0726, Fluid Level Tool, Damper Valve; 1 EA, P/N 465-0727, Maintenance Stand, Feeder; 1 EA, P/N 465-0728, Tool, Slippage Torque Test, Feeder Assembly; 1 EA, P/N 465-0732-2, Connector, Electrical Breakout; 2 EA, P/N 465-0738, Multi-Purpose Upload Wrench; 2 EA, P/N 465-0759, Recoil Mechanism Vise Holding Tool; 1 EA, P/N 465-0761, Holding Tool, Vise, Feeder Gear Clutch; 1 EA, P/N 465-4027, Recoil Spring Compression Tool; 12 EA, P/N 465-5013, Brush, Chamber, 30mm x 173; 12 EA, P/N 465-5014, Brush, Bore 30mm, Soft; 2 EA, P/N 465-5020, Kit, Cleaning Rod; 1 EA, P/N 465-5035, Erosion Gage, 30mm x 173; and 1 EA, P/N 465-5402, Spanner Wrench, Muzzle Brake. Amendment modifies this synopsis paragraph to read: The contract will be awarded for a quantity of 1 EA, P/N, 435-1002-4, GUN CONTROL UNIT; 1 EA, CHAIN; 5 EA, P/N, 465-0120, CAM PIN ASSEMBLY; 4 EA, P/N, 465-0143, PAWL, SAFETY; 44 EA, P/N, 465-0171, KEEPER, FIRING PIN SLEEVE; 32 EA, P/N, 465-0209, BUTTON, LINK STRIPPER; 1 EA, P/N, 465-0218, STEPPED SPACER; 1 EA, P/N, 465-0291, SOLENOID SUBASSEMBLY; 4 EA, P/N, 465-0296, HARNESS ASSY, FEED SELECT SOLENOID; 4 EA, P/N, 465-0315-2, BARREL ASSEMBLY; 6 EA, P/N, 465-0434, FIRING PIN ASSY; 12 EA, P/N, 465-0736, KIT, FEEDER MAINTENANCE REPAIR; 12 EA, P/N, 465-0737, KIT, RECEIVER MAINTENANCE REPAIR; 19 EA, P/N, 465-0743, KIT, SEAR WASHER REPLACEMENT; 24 EA, P/N, 465-0932, PIN, GROOVED, HEADED; 3 EA, P/N, 465-1102, RECIOL VALVE ASSEMBLY; 3 EA, P/N, 465-4015, CRANK, HAND; 3 EA, P/N, 465-4081, BUTTON, SPROCKET RELEASE; 3 EA, P/N, 465-4082, SLEEVE, SPROCKET RELEASE; 1 EA, P/N, 465-4089, SEAR ASSEMBLY; 12 EA, P/N, 465-4147, KIT, CLUTCH SPRING ASSEMBLY; 2 EA, P/N, 465-4254, NUT, WORM SHAFT; 2 ! EA, P/N, 465-4256, MATCHED SET, MANUAL DRIVE BEVEL GEAR; 2 EA, P/N, 465-4302, DRIVE SHAFT; 2 EA, P/N, 465-4393, SPROCKET, DRIVE; 4 EA, P/N, 465-4394, SPROCKET, IDLER; 3 EA, P/N, 465-4398, PIN, PAWL; 6 EA, P/N, 465-4424, PLUG, MACHINE THREAD; 3 EA, P/N, 465-4437, CAP, HOUSING, DAMPER; 5 EA, P/N, 465-4607, BEARING, ROLLER NEEDLE; 3 EA, P/N, 465-4611, SPRING, HELICAL, COMPRESSION; 3 EA, P/N, 465-4628-9, SPRING, HELICAL, COMPRESSION; 4 EA, P/N, 465-4632, BEARING, ROLLER, NEEDLE; 3 EA, P/N, 465-5047, SOLENOID, SEAR; 1 EA, UPPER LINK STRIPPER COVER; 1 EA, LOWER LINK STRIPPER COVER; 8 EA, P/N, 465-5103, SHIELD, LINK; 6 EA, P/N, 465-5169, STOP, ROUND; 5 EA, P/N, 465-5323, SLEEVE, FIRING PIN; 5 EA, P/N, 465-5381, PAWL, FIRING PIN; 4 EA, P/N, 465-5419, SEAR SOLENOID; 1 EA, P/N, 465-5426-13, SPRING SET, OUTER; 1 EA, P/N, 465-5488, COVER ASSEMBLY, LOWER LINK STRIPPER; 1 EA, P/N, 465-5489, COVER ASSEMBLY, UPPER LINK STRIPPER; 2 EA, P/N, 465-5494-2, MOTOR, 1.0 HP, DC; 1 EA, P/N, 465-5524! -1, ROUND POSITIONER ASSEMBLY; 2 EA, P/N, 465-5530-2, RECOIL MECHANISM; 1 EA, P/N, 465-5534, SUPPORT, SPRINGS; 20 EA, P/N, 465-5931, SPRING, CASE EJECT; 2 EA, P/N, 465-8080, FEED SHAFT STOP ASSEMBLY; 1 EA, ERROR CODE READER KIT; 1 EA, P/N, 435-1819-1, ERROR CODE READER KIT; 1 EA, CONTROL CABLE ASSEMBLY; 1 EA, POWER CABLE ASSEMBLY; 1 EA, GUN CONTROL PANEL; 1 EA, P/N, 435-1400-5, GUN CABLE ASSEMBLY;1 EA, P/N, 435-1871, HOM DEVICE; 2 EA, P/N, 444-5900, MAINTENANCE STAND, MK 44; 4 EA, P/N, 465-0723, SERVICE TOOL SCREWDRIVER, DAMPER VALVE; 4 EA, P/N, 465-0724, HOLDER, SLIPPAGE TORQUE TEST, RECEIVER CLUTCH; 3 EA, P/N, 465-0725, REMOVAL TOOL, DAMPER CAP; 5 EA, P/N, 465-0726, FLUID LEVEL TOOL, DAMPER VALVE; 4 EA, P/N, 465-0727, MAINTENANCE STAND, FEEDER; 4 EA, P/N, 465-0728, TOOL, SLIPPAGE TORQUE TEST, FEEDER ASSEMBLY; 1 EA, P/N, 465-0732-2, CONNECTOR, ELECTRICAL BREAKOUT; 4 EA, P/N, 465-0738, MULTI-PURPOSE UPLOAD WRENCH; 2 EA, P/N, 465-0759, RECOIL MECHANISM VISE HOLDING TOOL; 1 EA, P/N, 465-0761, HOLDING TOOL, VISE, FEEDER GEAR CLUTCH; 3 EA, P/N, 46! 5-4027, RECOIL SPRING COMPRESSION TOOL; 12 EA, P/N, 465-5013, BRUSH, CHAMBER, 30MM X 173; 12 EA, P/N, 465-5014, BRUSH, BORE 30MM, SOFT; 2 EA, P/N, 465-5020, KIT, CLEANING ROD; 2 EA, P/N, 465-5035, ERROSION GAGE, 30MM X 173MM and 1 EA, P/N, 465-5402, SPANNER WRENCH, MUZZLE BRAKE. The government point of contact is Mr. Matthew S. Summers, Code CXMLNL at telephone number 812-854-8756, facsimile number 812-854-5095 or e-mail matthew.s.summers@navy.mil. Complete mailing address is: Mr. Matthew S. Summers, Code CXMLNL, Bldg. 3422, NAVSURFWARCENDIV Crane, 300 Highway 361, Crane, IN 47522-5001. Reference the above solicitation number when responding to this notice.
- Web Link
-
FBO.gov Permalink
(https://www.fbo.gov/spg/DON/NAVSEA/N00164/N0016410RJN92/listing.html)
- Record
- SN02112820-W 20100407/100405234903-3a11e38c68adee19a1799f9fd3d02189 (fbodaily.com)
- Source
-
FedBizOpps Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |