Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF APRIL 28, 2010 FBO #3077
SOLICITATION NOTICE

53 -- RFQ for 5315-00-170-5314 - RFQ for 5315-00-170-5314

Notice Date
4/26/2010
 
Notice Type
Combined Synopsis/Solicitation
 
NAICS
423710 — Hardware Merchant Wholesalers
 
Contracting Office
General Services Administration, Federal Acquisition Service (FAS), Southwest Supply Operations Center (QSDL), 819 Taylor St Room 6A00, Fort Worth, Texas, 76102, United States
 
ZIP Code
76102
 
Solicitation Number
5315-00-170-5314B
 
Archive Date
5/14/2010
 
Point of Contact
Richard Alan Craig, Phone: 817-574-2518
 
E-Mail Address
alan.craig@gsa.gov
(alan.craig@gsa.gov)
 
Small Business Set-Aside
N/A
 
Description
RFQ for 5315-00-170-5314 RFQ is for proposed One-Time Buy. IPD is as follows: SN: 5315-00-170-5314 NAIL: Shall be in accordance with ASTM F1667 with the following characteristics: Type I - Nails Style 20 - Roofing Table 29 - Steel wire, flat head, diamond point, barbed shank, zinc coated Dash # - 36 Shank Dia. - 0.106 inch Head Dia. - 0.375 inch Length - 1-1/2 inches Part # - F1667 NL RF S Q-36 Z Unit of issue - BX (fifty (50) pounds of nails per box) Application for copies of ASTM standards should be addressed to ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. The documents/specifications referenced in this purchase description shall be the issues in effect on the date of issuance of the invitation for bids or request for proposals. In the event of a conflict between this purchase description and a document referenced herein, this purchase description shall take precedence. PRODUCT CONFORMANCE. The products provided shall meet the salient characteristics of this description, conform to the producer's own drawings, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. MARKING : Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129. PREPARATION FOR DELIVERY : The item(s) shall be packaged and packed to afford adequate protection against physical damage during shipment from the supplier to the first receiving activity. The pack shall comply with the rules and regulations applicable to the mode of transportation. The package shall be the same as that normally provided by the supplier. In the event a pallet or skid is used for shipping, the following notice shall apply: Notice of special requirements for shipment to all countries that have endorsed the IPPC Guidelines for treatment of non-manufactured wood packaging : The International Plant Protection Convention (IPPC) has approved and published on March 15, 2002, "Guidelines for Regulating Wood Packaging Material in International Trade". Countries endorsing the IPPC Guidelines are found at http://www.aphis.usda.gov/ppq/swp/. Clause D-FSS-468 requires non-manufactured wood pallets and other non-manufactured wood packaging material used in shipments destined to IPPC compliant countries require the appropriate wood treatment. Additionally, shipments delivered to DOD distribution facilities or freight consolidation points for eventual delivery to or through EU/IPPC countries shall comply with applicable DLA Regulations and Procurement Letter PROCLTR 02-17.
 
Web Link
FBO.gov Permalink
(https://www.fbo.gov/notices/45ce676c9f28740abfe254d21f605d3e)
 
Place of Performance
Address: CONUS, United States
 
Record
SN02132522-W 20100428/100426235303-45ce676c9f28740abfe254d21f605d3e (fbodaily.com)
 
Source
FedBizOpps Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.