PRESOL | 84 | Shoes, Women's Poromeric

FBO DAILY ISSUE OF APRIL 29, 2010 FBO #3078
SOLICITATION NOTICE

84 -- Shoes, Women's Poromeric

Notice Date: 4/27/2010
Notice Type: Combined Synopsis/Solicitation
NAICS: 316214 — Women's Footwear (except Athletic) Manufacturing
Contracting Office: Defense Logistics Agency, DLA Acquisition Locations, Defense Supply Center Philadelphia - Clothing & Textiles, 700 Robbins Avenue, Philadelphia, Pennsylvania, 19111-5096
ZIP Code: 19111-5096
Solicitation Number: SPM1C1-10-Q-0329
Point of Contact: Cynthia Ortiz, Phone: 215-737-5824
E-Mail Address: Cynthia.Ortiz@dla.mil
(Cynthia.Ortiz@dla.mil)
Small Business Set-Aside: Total Small Business
Description: This is a combined synopsis/solicitation(RFQ) for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the ONLY solicitation/Request For Quotation there will be; quotations are being requested and a written solicitation will NOT be issued. This is a request for competitive quotations with a priority of D0-C9 DPAS rating. Interested person may identify their interest and capability to respond to the requirement and submit quotations. All quotes received by 3:30 PM (EASTERN) 12 MAY 2010 will be considered by the Government. Facsimile and e-mail quotes are acceptable. For information and/or to quote, please contact Cynthia Ortiz, telephone: 215-737-5824, fax: 215-737-7429, the preferred method of communication/quote is via email at cynthia.ortiz@dla.mil. This is a total (100%) Small Business Set Aside. Item being procured: SHOE, WOMEN'S POROMERIC, NSN 8435-01-450-4326. In Accordance With PURCHASE DESCRIPTION FQSD/PD 94-05, 03 MAY 1995, WITH LIST OF INTERIM CHANGES DATED 18 DECEMBER 1997. Quantity: 3,120 PAIRS. Destination: SC0102, Lion Vallen Industries, Suffolk, VA. Production lead-time is 120 days after date of award or earlier. FOB Destination. The clauses at 52.212-1, 52.212-3, 52.212-4, and 52.212-5, apply to this acquisition, including, but not limited to, the following: 52.203-6, Restrictions on Subcontractor Sales to the Government (JUL 1995), 52.225-13, Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). 52.222-3, Convict Labor (JUN 2003) (E.O. 11755). 52.222-19, Child Labor-Cooperation with Authorities and Remedies (AUG 2009) (E.O. 13126). 52.222-21, Prohibition of Segregated Facilities (FEB 1999). 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246). 52.225-13, Restrictions on Certain Foreign Purchases (JUN 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury). 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (OCT 2003) (31 U.S.C. 3332). 252.225-7036, Buy American Act--Free Trade Agreements--Balance of Payment Program (JUL 2009) (41 U.S.C. 10a-10d and 19 U.S.C. 3301 note). 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports (MAR 2008) (10 U.S.C. 2227). 252.243-7002, Requests for Equitable Adjustment (MAR 1998) (10 U.S.C. 2410) 52.247-34 F.O.B. DESTINATION DFARS 252.211-7006 Radio Frequency Identification (FEB 2007) NOTE: The award for this requirement will be evaluated based on price. PACKAGING AND OTHER REFERENCES: PRESERVATION / PACKING PREPARATION FOR DELIVERY: EACH PAIR OF SHOES, SHALL BE UNIT PACKAGED WITH TISSUE PAPER, LARGE ENOUGH TO COMPLETELY AFFORD SEPARATION. A SET-UP STYLE BOX, IN ACCORDANCE WITH STANDARD COMMERCIAL PRACTICES, SHALL BE USED.. PACKING INSTRUCTIONS:. TWELVE PAIR OF SHOES, ONE WIDTH AND SIZE, SHALL BE PACKED IN A FIBERBOARD SHIPPING CONTAINER CONFORMING TO TYPE CF (VARIETY SW) OR CF, CLASS DOMESTIC, GRADE 275 OF ASTM D5118/D5118M. CLOSURE SHALL BE IN ACCORDANCE WITH ASTM D1974. UNLESS OTHERWISE SPECIFIED, THE SELECTION OF THE CLOSURE MATERIAL SHALL BE AT THE DISCRETION OF THE CONTRACTOR. THE SHOE UNIT PACKS WILL BE PLACED ON END, SUCH THAT THE UNIT PACK LABEL IS CLEARLY VISIBLE FROM THE TOP OF AN OPENED SHIPPING CONTAINER.THE OUTER DIMENSIONS AND STACKING PATTERN FOR THE CONTAINERS ARRANGED ON A PALLET SHALL BE DESINGNED SO THAT THE PACKED PRODUCT CONFORMS TO THE REQUIREMENTS OF MIL-STD- 147, LOAD TYPE 1A, AND FORMS A COMPACT, SQUARED LOAD, CENTERED ON THE LOAD BASE AND SQUARED TO ALL CORNERS OF THE PALLET. MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.. PALLETIZATIONIS REQUIRED. PALLET SHALL BE 4 WAY ENTRY, WINGED TYPE. PALLERIZED LOAD DIMENSIONS SHALL NOT EXCEED 43 INCHES INLENGHT, 52 INCHES IN WIDTH, AND 54 INCHES IN HEIGHT (INCLUDING THE PALLET). THE PALLETIZED LOAD SHALL BE BONDED USING APPROVED COMMERCIAL BONDING MATERIALS. PALLET LOADS SHALL CONTAIN THE SAME NUMBER OF CARTONS, OF IDENTICAL QUANTITIES, OF ON NSN, TO THE MAXIMUM EXTENT POSSIBLE. PALLET LOADS CONTAINING MORE THAN ONE NSN SHALL BE CLEARLY MARKED TO LIST ALL THE NSN'S CONTAINED IN THE LOAD. NO CARTON SHALL HAVE MORE THAN ONE NSN. AT THE END PF A SIZE RUN, NO MORE THAN ONE CARTON PER NSN MAY BE SHORT OR OVER THE SPECIFIED QUANTITY. SAID CARTON SHALL BE CLEARLY MARKED "SHORT" OR "OVER".. MIL-HBK-774 IS HEREBY REFERENCED FOR GUIDANCE FOR PALLETIZED LOADS. (Ref. W2429). ADDITIONAL INFORMATION FOR V-L-61:. THE GENERAL SERVICES ADMINISTRATION HAS AUTHORIZED THE USE OF THIS COMMERCIAL ITEM DESCRIPTION A-A-55093 DATED 15 NOVEMBER 1992 IN PREFERENCE TO FEDERAL SPECIFICATION V-L-61. (REF. T0699) ADDITIONAL INFORMATION FOR NN-P-71:. NO ADDITIONAL INFORMATION FOLLOWS.. ADDITIONAL INFORMATION FOR MIL-L-21635:. THE FOLLOWING INTERIM CHANGES APPLY:. LAST, FOOTWEAR, (SHOE, WOMAN'S, OXFORD) SHALL BE IN ACCORDANCE WITH MILITARY SPECIFICATION MIL-L-21635D DATED 30 NOVEMBER 1979 WITH THE FOLLOWING INTERIM CHANGES: PARA. 2.1, UNDER "FEDERAL SPECIFICATIONS, ADD: "PPP-B-640 - BOX, FIBERBOARD CORRUGATED, TRIPLE WALL". UNDER MILITARY STANDARDS, ADD: "MIL-STD-147 - MILITARY STANDARD PALLETIZED UNIT LOADS".. PARA. 3.3.4, OPPOSITE WALL THICKNESS DELETE "0.950" AND SUBSTITUTE: "0.095". PARA 4.3.4., PACKAGING INSPECTION, LINE 4, DELETE "SHIPPING BAG" AND SUBSTITUTE: "TRI-WALL CONTAINER".. INSPECTION LEVELS AND ACCEPTABLE AQL(S). PAGE 13, PARA. 4.3.3.1...CHANGE TO READ 2.5. PARA. 4.3.3.2....CHANGE TO READ....2.5.. LINE 6, DELETE "SHIPPING BAGS" AND SUBSTITUTE: "TRI-WALL CONTAINERS." UNDER DEFECT DESCRIPTIONS ENTITLED "CONTENT" ADD "UNEQUAL QUANTITIES OF LEFT AND RIGHT LASTS "ANY LAST NOT MADE TO THIS SPECIFICATION. "LASTS NOT SAME SIZE OR WIDTH IN ANY BAG.". DELETE PARA. 5.1 AND SUBSTITUTE THE FOLLOWING. "5.1. PRESERVATION. PRESERVATION SHALL BE LEVEL A OR C (SEE 6.2).". 5.1.1 - DELETE: "B";"TWENTY-FOUR";AND "PACKED", AND SUBSTITUTE: "A";"TWELVE";AND "PRESERVED", RESPECTIVELY.. PARA. 5.2 - DELETE "5.2" AND SUBSTITUTE: "5.3". ADD THE FOLLOWING NEW PARAS. 5.2 AND 5.2.1: "5.2 PACKING. PACKING SHALL BE LEVEL B. 5.2.1 PACKING LEVEL B. BAGS OF LASTS, PRESERVED AS SPECIFIED IN 5.1, SHALL BE PACKED IN A TRIPLE WALL CORRUGATED FIBERBOARD CONTAINER CONFORMING TO CLASS 1 STYLE G OF PPP-B-640.THE APPROXIMATE OUTSIDE CONTAINER DIMENSIONS SHALL BE 48 INCHES IN LENGTH,40INCHES IN WIDTH,AND 48 INCHES IN DEPTH. MIXED SIZES AND/OR WIDTHS OF LASTS, PRE- SERVED TO PARA. 5.1, MAY BE PACKED WITHIN THE TRI-WALL CONTAINER. IN SUCH CASES, EACH PALLET LOAD SHALL BE CLEARLY MARKED "MIXED" ALONG WITH EACH NSN QUANTITY ON THE PALLET LOAD AND ITS TOTAL QUANTITY. TRI-WALL CONTAINERS SHALL BE CLOSED IN ACCORCANCE WITH PPP-B-640, PALLETIZED ON A 4-WAY ENTRY PALLET IN ACCORDANCE WITH LOAD TYPE IA OF MIL-STD-147. PALLET TYPE SHALL BE TYPE I (4-WAY ENTRY), TYPE IV, OR TYPE V IN ACCORDANCE WITH MIL-STD-147. EACH PRE- PARED LOAD SHALL BE BONDED WITH PRIMARY AND SECONDARY STRAPS IN ACCORDANCE WITH BONDING MEANS D OF MIL-STD-147." ACCEPTABLE (AQL)S PAGE 13, PARA. 4.3.3.1....CHANGE TO READ 1.5 PAGE 13, PARA. 4.3.3.2...CHANGE TO READ 1.5. (Ref. T1308). ADDITIONAL INFORMATION FOR PPP-B-636: FEDERAL SPECIFICATION PPP-B-636 DATED JULY 12, 1981, INCLUDING INTERIM FEDERAL SPECIFICATION PPP-B-636L DATED JANUARY 1, 1991, IS HEREBY CANCELLED, AND REPLACED WITH ASTM-D-5118, STANDARD PRACTICE FOR FABRICATION OF FIBERBOARD SHIPPING BOXES, AND ASTM-D-1974, STANDARD PRACTICE FOR METHOD OF CLOSING, SEALING AND REINFORCING FIBERBOARD SHIPPING CONTAINERS. ADDITIONAL INFORMATION FOR MIL-L-21635:. THE FOLLOWING INTERIM CHANGES APPLY:. PARA. 2.1, UNDER "FEDERAL SPECIFICATIONS, ADD: "PPP-B-640 - BOX, FIBERBOARD CORRUGATED, TRIPLE WALL". UNDER MILITARY STANDARDS, ADD: "MIL-STD-147 - MILITARY STANDARD PALLETIZED UNIT LOADS".. PARA. 3.3.4, OPPOSITE WALL THICKNESS DELETE "0.950" AND SUBSTITUTE: "0.095". PARA 4.3.4., PACKAGING INSPECTION, LINE 4, DELETE "SHIPPING BAG" AND SUBSTITUTE: "TRI-WALL CONTAINER".. INSPECTION LEVELS AND ACCEPTABLE AQL(S). PAGE 13, PARA. 4.3.3.1...CHANGE TO READ 2.5. PARA. 4.3.3.2....CHANGE TO READ....2.5.. LINE 6, DELETE "SHIPPING BAGS" AND SUBSTITUTE: "TRI-WALL CONTAINERS." UNDER DEFECT DESCRIPTIONS ENTITLED "CONTENT" ADD "UNEQUAL QUANTITIES OF LEFT AND RIGHT LASTS "ANY LAST NOT MADE TO THIS SPECIFICATION. "LASTS NOT SAME SIZE OR WIDTH IN ANY BAG.". DELETE PARA. 5.1 AND SUBSTITUTE THE FOLLOWING. "5.1. PRESERVATION. PRESERVATION SHALL BE LEVEL A OR C (SEE 6.2).". 5.1.1 - DELETE: "B";"TWENTY-FOUR";AND "PACKED", AND SUBSTITUTE: "A";"TWELVE";AND "PRESERVED", RESPECTIVELY.. PARA. 5.2 - DELETE "5.2" AND SUBSTITUTE: "5.3". ADD THE FOLLOWING NEW PARAS. 5.2 AND 5.2.1: "5.2 PACKING. PACKING SHALL BE LEVEL B. 5.2.1 PACKING LEVEL B. BAGS OF LASTS, PRESERVED AS SPECIFIED IN 5.1, SHALL BE PACKED IN A TRIPLE WALL CORRUGATED FIBERBOARD CONTAINER CONFORMING TO CLASS 1 STYLE G OF PPP-B-640.THE APPROXIMATE OUTSIDE CONTAINER DIMENSIONS SHALL BE 48 INCHES IN LENGTH,40INCHES IN WIDTH,AND 48 INCHES IN DEPTH. MIXED SIZES AND/OR WIDTHS OF LASTS, PRE- SERVED TO PARA. 5.1, MAY BE PACKED WITHIN THE TRI-WALL CONTAINER. IN SUCH CASES, EACH PALLET LOAD SHALL BE CLEARLY MARKED "MIXED" ALONG WITH EACH NSN QUANTITY ON THE PALLET LOAD AND ITS TOTAL QUANTITY. TRI-WALL CONTAINERS SHALL BE CLOSED IN ACCORCANCE WITH PPP-B-640, PALLETIZED ON A 4-WAY ENTRY PALLET IN ACCORDANCE WITH LOAD TYPE IA OF MIL-STD-147. PALLET TYPE SHALL BE TYPE I (4-WAY ENTRY), TYPE IV, OR TYPE V IN ACCORDANCE WITH MIL-STD-147. EACH PRE- PARED LOAD SHALL BE BONDED WITH PRIMARY AND SECONDARY STRAPS IN ACCORDANCE WITH BONDING MEANS D OF MIL-STD-147." ACCEPTABLE (AQL)S PAGE 13, PARA. 4.3.3.1....CHANGE TO READ 1.5 PAGE 13, PARA. 4.3.3.2...CHANGE TO READ 1.5. (Ref. W1558). ADDITIONAL INFORMATION: FED-STD-751 HAS BEEN CANCELLED AND REPLACED BY ASTM-D-6193, 4/98 STANDARD PRACTICES FOR STITCHES AND SEAMS. THIS STANDARD SHOULD BE USED IN PREFERENCE TO FED-STD-751. (ref. T0216 - May 18, 2006) ADDITIONAL INFORMATION FOR FED-STD-191: FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW DESIGN. WHEN NOT USING FED-STD-191, SEE INTERIM CHANGES TO END ITEM SPECIFICATION FOR REPLACEMENT ASTM. INTERIM CHANGES TO FED-STD-191A: TEST METHOD 5202, PARA. 5.3, DELETE FIRST SENTENCE AND SUBSTITUTE: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF THE VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE". TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING. PAGE 1, PARA 4.1.2,LINE 4: DELETE "B-97" AND SUBSTITUTE "B-91". THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONE DEPLETING SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540, AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRE THE USE OF 1,1,1- TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE DEPLETING SUBSTANCE (METHYL CHLOROFORM) AND IS THEREFORE PROHIBITED. THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN BASIC OR ANY REFERENCED DOCUMENT. METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD. PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE AND SUBSTITUTE WITH THE FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH THE OUTER EDGE OF THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES WITHIN THE CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (INNER FACE OF THE VISE) AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL PLATE." METHOD 5556.1, MOBILE LAUNDRY EVALUATION FOR TEXTILE MATERIALS, PAGE 5, PARA. 5.2.2, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACK TEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 45-60 MINUTES OR UNTILSAMPLES ARE DRY IN A ROTATING TUMBLE DRYER." PAGE 5, PARA. 5.2.3, LINE 8: DELETE SENTENCE BEGINNING WITH "THE SPECIMENS AND BALLAST" IN ITS ENTIRETY AND SUBSTITUTE WITH THEFOLLOWING: "THE SPECIMENS AND BALLAST SHALL BE SEPARATED, OPENED TO FULL WIDTH AND PLACED IN A PRE-HEATED DRYER HAVING A STACKTEMPERATURE OF 140-180 DEG. F. THIS TEMPERATURE RANGE CORRESPONDS TO A SETTING OF "HIGH" ON THE TEMPERATURE INDICATOR ON THE DRYER. DRYING SHALL CONTINUE FOR 35-40 MINUTES OR UNTIL SAMPLES ARE DRY." METHOD 5931, ELECTROSTATIC DECAY OF FABRICS; DETERMINATION OF PAGE 1, PARA. 3: AFTER NUMBER OF DETERMINATIONS ADD "PER SAMPLEUNIT". PAGE 1, PARA. 4: DELETE "APPARATUS" AND SUBSTITUTE "APPARATUS". PAGE 1, PARA. 5.1, LINE 3: AFTER "AT" DELETE"APPROXIMATELY". PAGE 2, PARA. 5.2, LINES 2, AND 5: AFTER "OF" ADD "+-". LINE 6: AFTER "TO" ADD "+-". PAGE 2, PARA. 5.3: DELETE IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING:"5.3 MOUNT A SPECIMEN TIGHTLY ACROSS THE ELECTRODES, CENTERING IT OVER THE SENSOR OPENING. THE SURFACE OF THE TEST SPECIMEN (BACK OR FRONT) SHALL FACE THE SENSOR. RECORD (OPTIONAL) THE RESIDUAL CHARGE LEVEL ON THE SAMPLE AS SEEN BY THE SENSOR, INCLUDING POLARITY. NOTE THAT TEST SAMPLES WITH THE RESIDUAL CHARGE LEVELS OF LESS +500 VOLTS YIELD THE BEST RESULTS. APPLY +5000 VOLTS TO THEELECTRODES FOR A PERIOD OF 20 SECS. AT THE END OF THE 20 SECOND PERIOD, THE HIGH VOLTAGE (5000 VOLTS) SHALL BE TURNED OFF ANDTHE SPECIMENS IMMEDIATELY GROUNDED. THE VOLTAGE BEHAVIOR OF THE SPECIMEN WITH RESPECT TO TIME SHALL BE PLOTTED ON THE RECORDER. NOTE: IN SOME CASES, THE TEST EQUIPMENT WILL DISPLAY VOLTAGE AND DECAY TIME INFORMATION AND A CHART RECORDER IS NOT NECESSARY." PAGE 2, PARA. 5.4, LINE 3: DELETE SENTENCE BEGINNING WITH "IF THE SPECIMEN DID" IN ITS ENTIRETY. PAGE 2, PARA. 5.5: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "RECORD THE MAXIMUM VOLTAGE LEVEL(INCLUDING POLARITY) AND DECAY TIME TO 10% OF THE MAXIMUM VOLTAGE LEVEL ACHIEVED." PAGE 2, PARA. 5.6, LINE 1: ADD THE FOLLOWING PRIOR TO 1ST SENTENCE: "REVERSE VOLTAGE POLARITY REPEAT MEASUREMENT, ANDRECORD RESULTS." PAGE 3, PARA. 6.6: DELETE PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE WITH THE FOLLOWING: "THE AVERAGE TIME TO DECAY TO 10%OF THE MAX VOLTAGE SHALL BE INCLUDED FOR EACH OF THE WARP & FILLING DIRECTIONS, AS WELL AS THE OVERALL AVERAGE, FOR EACHFABRIC TESTED. THESE WILL BE OBTAINED BY AVERAGING THE TEST RESULTS (ABSOLUTE VALUE OF) TOGETHER FOR BOTH VOLTAGEPOLARITIES. UNLESS OTHERWISE STATED IN THE REQUIREMENTS DOCUMENT, THE FABRIC SHALL BE CONSIDERED ACCEPTABLE IF THEAVERAGE MAXIMUM VOLTAGE IN BOTH THE WARP AND FILLING DIRECTIONS IS LESS THAN 4000 VOLTS, AND THE AVERAGE DECAY TIME (TO 10% MAXVOLTAGE) IS GREATER THAN 0.5 SECONDS IN BOTH THE WARP AND FILLING DIRECTIONS. IT SHALL BE INDICATED WHETHER THE FABRIC ISACCEPTABLE OR NON-ACCEPTABLE." PAGE 3, PARA. 7.1, SECOND COLUMN, LINE 2: DELETE 406C AND SUBSTITUTE WITH "406D". AFTER PARA. 7.1, ADD THE FOLLOWING: "7.2 NOTE: IF THE MODEL 406D STATIC DECAY METER, OR EQUIVALENT, IS USED, A CHART RECORDER ISNOT MANDATORY FOR THE TEST." ADDITIONAL INFORMATION FOR MIL-I-45208: NOTE: MIL-I-45208 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING: INTERNATIONAL STANDARDS ISO 9001:2000 OR AMERICAN SOCIETY FOR QUALITY ASQ 2003 VERSION. HIGHER LEVEL INSPECTION SYSTEM: THE INSPECTION SYSTEM(S) MUST BE SUBMITTED WITH YOUR BID PROPOSAL FOR EVALUATION AND APPROVAL BY DSCP'S CONTRACTING OFFICER. INSPECTION SYSTEM(S) COMPLIANT/BUT ARE NOT LIMITED TO THE INTERNATIONAL STANDARDS ISO 9002 OR ASQ 2003 MAY BE UTILIZED IF TAILORED TO THE SPECIFICQUALITY ASSURANCE REQUIREMENTS IN THIS SOLICITATION. BAR CODE LABEL/TAG. EACH PAIR OF FOOTWEAR SHALL BE BAR CODED WITH A TYPE VIII, CLASS 18, LABEL/TAG OF DDD-L-20. THE LABEL/TAG SHALL BE LOCATED SO THAT IT IS COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND/OR PACKAGED AS SPECIFIED AND SHALL CAUSE NO DAMAGE TO THE ITEM. EXAMINE DEFECT CLASSIFICATION BAR CODE BAR CODE OMITTED OR LABEL/TAG NOT READABLE BY. SCANNER. MINOR. HUMAN READABLE. INTERPRETATION (HRI). OMITTED OR ILLEGIBLE. MINOR. NOT VISIBLE ON FOLDED/ PACKAGED ITEM. MINOR CAUSES DAMAGE TO THE ITEM. MAJOR (Ref. T6852) ADDITIONAL INFORMATION FOR FED-STD-311:. INTERIM CHANGES TO FED-STD-311:. SECTION 4, PARA. 4.5.1.2, LINE 8: DELETE THE PERIOD AFTER "BACKBONE" AND ADD "AND TO INDICATE THE ROOT OF THE TAIL".. INTERIM CHANGE FROM TEST METHOD 7011.1:. PARA. 4.1.2: DELETE ENTIRELY AND SUBSTITUTE THE FOLLOWING:. 4.1.2. INDICATING DEVICE. THE INDICATING DEVICE SHALL BE EITHER OF THE KINDS LISTED BELOW.. 4.1.2.1 THEIS SHRINKAGE METER DIAL. A DIAL INDICATOR HAVING A FACE DIVIDED INTO 360-380 DEGREES, WITH ONE REVOLUTION OF THE DIAL HAND CORRESPONDING TO 0.5 INCHES (12.7 MM) SPECIMEN MOVEMENT, WITH LEEWAY FOR FOUR REVOLUTIONS.. 4.1.2.2 AGD DIAL INDICATOR. A MECHANICAL DEVICE CAPABLE OF REGISTERING ON A SCALE READING OF THE SHRINKAGE OR SWELLING RATIO OF THE SPECIMEN IN A RATIO OF 25 UNITS OF DIAL MOVEMENT TO ONE UNIT OF SPECIMEN MOVEMENT, OR GREATER, AND SHALL ACCURATELY DETECT THE POINT AT WHICH SHRINKAGE BEGINS BY THE MOVEMENT OF THE DIAL NEEDLE. THE INDICATOR SHALL HAVE A SPINDLE CAPABLE OF ATTACHMENT TO THE SPECIMEN AND TO THE ADJUST- ABLE WEIGHT ASSEMBLY (SEE 4.1.11).". PARA. 4.1.3: DELETE "HEATING COIL" AND INSERT "IMMERSION HEATER".. PARA.7.1: DELETE ENTIRELY AND SUBSTITUTE THE FOLLOWING:. "7.1 THE THERMOMETERS MAY BE PURCHASED FROM THE THOMAS SCIENTIFIC CO. OR FISHER SCIENTIFIC CO., EACH HAVING REGIONAL OFFICES.. 7.2 DIAL INDICATORS MAY BE PURCHASED FROM B. C. AMES CO., LEXINGTON STREET, WALTHAM, MA 02254." (Ref. T0211). ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4: NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED. APPLICATION FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN SOCIETY FOR QUALITY 600 NORTH PLANKINTON AVENUE MILWAUKEE, WISCONSIN 53203 CURRENT DOD PREFERRED METHODS FOR ACCEPTANCE OF PRODUCTS ARE DESCRIBED IN MIL-STD-1916, DATED APRIL 1, 1996, AND SHOULD BE CONSIDERED FOR FUTURE ACQUISITIONS. (26 MARCH 2001). (Ref. T0795 - May 17, 2006) MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND STORAGE - DATED 19 SEPTEMBER 2007 INTERIM CHANGES: OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS IN THE DEFENSE SUPPLY CENTER (DSCP) CLOTHING AND TEXTILE (C&T) DIRECTORATE: THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DSCP C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT. IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIP- MENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE CONTAINER. MIL-STD-147 IS HEREBY REINSTATED AS FOLLOWS: MIL-STD-147E DEPARTMENT OF DEFENSE 16 MAY 2008 STANDARD PRACTICE PALLETIZED UNIT LOADS STANDARDS (COMMERCIAL) ASME-MH1 American Society of Mechanical Engineers (ASME) Pallets, Slip Sheets, and Other Bases For Unit Loads, for construction of pallets. THIS IS A TYPE II (CODE 9) SHELF LIFE ITEM WITH A SHELF LIFE OF 60 MONTHS (EXTENDABLE) NOTE: PARAGRAPH 5.2.1 OF MIL-STD-129P W/CHANGE 4 IS APPLICABLE.
Web Link: FBO.gov Permalink
(https://www.fbo.gov/spg/DLA/J3/DSCP-C/SPM1C1-10-Q-0329/listing.html)
Place of Performance: Address: Philadelphia, Pennsylvania, 19111, United States; Zip Code: 19111
Record: SN02132975-W 20100429/100427234703-b35e337e4155b02eaa0ab079d8d9745e (fbodaily.com)
Source: FedBizOpps Link to This Notice
(may not be valid after Archive Date)

| FSG Index | This Issue's Index | Today's FBO Daily Index Page |

Loren Data's SAM Daily™

84 -- Shoes, Women's Poromeric